1. Início
  2. Tekla Structures
  3. Share models and files
  4. Import to and export from Tekla Structures
  5. Layout manager
  6. Create a layout point

Create a layout point

Modified: 11 Jun 2026 Tekla Structures 2025

Create a layout point

Use the Layout point tool to create layout points. The layout points that you create in the model are design points that you can export to use in a layout device, such as Trimble® LM80.

Before you start:

  • Ensure that the Select components selection switch is activated.

  1. On the Manage tab, click Layout manager.
  2. Click the Layout point button to start creating layout points.

    Tekla Structures opens the Layout point dialog and the Applications & components catalog in the side pane.

  3. In the Layout point dialog, define the layout point properties on the Parameters tab:
    Option Description

    Name

    Name of the layout point

    You can use the following special characters in layout point names:_ ~ % ! @ # & . = + - and space.

    Note that the maximum length of the name is 16 characters if you export layout data to .cnx, .tfl, and .tflx file formats. When exporting to a text file (.txt) or a CSV file (.csv), there is no limitation in the number of characters in the name. The maximum length of the description is 24 characters.

    If you do not enter a name, Layout manager adds a number as the name.
    Description

    Description of the layout point

    Size

    Diameter of the layout point

    Layout manager uses the XS_IMPERIAL advanced option to determine the units. Set XS_IMPERIAL to TRUE to use imperial units.

    Is Reference Point

    Select whether the layout point is a reference point.

    A reference point is a mapping point to another coordinate system, such as a geo-spatial coordinate system or a municipal monument.

    Part name

    Class of the layout point

    Shape

    Shape of the layout point

    Part name

    Name of the part that the Layout point tool creates in the model

    Group Name

    Select a group from the Group Name list or create a new group by entering a name.

    These groups are the groups that are listed in Layout manager.
    Is Stakeout Point

    For imported points, Is Stakeout Point shows whether the point is a measured point as staked in the Trimble® LM80 device if it deviates from the corresponding layout point created in the model.

    The property is not available for the points that you are defining in the model.

    Is Field Point

    For an imported point, Is Field Point shows whether a point is a field point that has been measured on the construction site and imported to Tekla Structures.

    The property is not available for the points that you are defining in the model.

    Part numbering

    Part prefix and start number for the part position number

    Assembly numbering

    Assembly prefix and start number for the assembly position number
  4. Click Apply.
  5. Select a location for the layout point in the model.

    The layout point is created when you select the location, and it is added to the group that you selected in the Layout point dialog. To close the dialog, click OK.

Tip:

You can also add a layout point to a group in Layout manager. Select the point in the model, then right-click the desired group in Layout manager and select Add selected.

Tip:

To zoom to a layout point in the model, right-click the point in Layout manager and select Zoom selected.

In Layout manager, you can highlight a layout point that you have selected in the model. First select a point in the model, then in Layout manager, click Highlight > Highlight selected model point. Select Redraw to remove the highlighting.

Esta informação foi útil?
Enviar
Anterior
Seguinte