Tube-CrossingSaddle
Tube-CrossingSaddle connects a round tube to a round tube. The connection creates a saddle cut to the secondary tube.
Objects created
-
Cuts
-
Welds
Use for
|
Situation |
Description |
|---|---|
|
|
Crossing saddle connection. |
Limitations
-
No support for polybeams or contour plates.
Selection order
-
Select the main part (round tube).
-
Select the secondary part (round tube).
The connection is created automatically when the secondary part is selected.
Parameters tab
Use the Parameters tab to control the saddle cuts.
Connection options
|
Option |
Description |
|---|---|
|
|
Crossing Saddle Creates a crossing saddle to the secondary part. |
Tube NC Parameters
|
Option |
Description |
|---|---|
|
Bevel angle |
The weld preparation angle created during NC processing of the tube. The bevel is created to the secondary part. |
|
Root opening above |
The gap between the parts. The gap is created in the model. |
|
Shrinkage |
The shrinkage considered during NC processing of the tube. The shrinkage value has no effect on the model. |
|
Maximum torch angle |
Maximum torch angle. The default is 70.0. |
|
Minimum torch angle |
Minimum torch angle. The default is -70.0. |
Note:
Bevel angle information is used only in NC data, and no actual weld preparations are created in the model.
Welding tab
Click the link below to find out more:
General tab
Click the link below to find out more:
Analysis tab
Click the link below to find out more: