Part orientation in drawing views
In single-part, assembly, and cast unit drawings, you can adjust the orientation of the parts in the drawing views by selecting an appropriate coordinate system and by rotating the parts. You can also separately set the viewing direction of columns, beams and bracings in assembly drawings. The project north setting also affects part orientation.
To | Click the links below to find out more |
---|---|
To change the angle from which the part, assembly, or cast unit is viewed, how the part, assembly, or cast unit is rotated, and how the dimensions in the drawing view are oriented | Change the coordinate system |
Rotate a part, assembly, or cast unit in a drawing view around its local axes | Rotate parts in drawing views |
Select which side of a steel or timber part is always shown in the drawing main view | Select the steel or timber part face that is shown in front drawing view |
Change the plate orientation in drawing views | Change plate orientation in drawings
XS_POLYGON_SQUARE_CORNER_PREFERENCE_FACTOR XS_POLYGON_PERPENDICULAR_EDGE_PREFERENCE_FACTOR |
Define the front view direction separately for columns | Set viewing direction for parts in assembly drawings |
Define the front view direction separately for beams and bracings | Set viewing direction for parts in assembly drawings |