When you create general arrangement drawings, remember to load the closest possible predefined properties in the drawing properties first, then modify the properties if needed, and then create the drawing.

1. Create the model views you need.

   If you want to switch between 3D view and plane view in the created view, press Ctrl+P.

2. On the Drawings & reports tab, click Drawing properties > GA drawing.
3. Select the appropriate predefined drawing properties (saved settings) from the list at the top and click Load.

   Always load predefined properties when you are creating a drawing. When you need to modify drawing properties, save the new changes to the properties file when necessary.

4. If needed, modify drawing properties and, if necessary, apply object-level settings.
5. Click Apply or OK.
6. On the Drawings & reports tab, click Create drawings > GA drawing.

   Alternatively, you can select the model views from the model (selected views get a yellow frame), right-click and click Create general arrangement drawing...

7. If you have not selected the views yet, select them from the displayed list.

   You can use the Shift and Ctrl buttons for selecting several views.

8. In the Options list, select if you want to create one drawing for each selected view or add all selected views in one drawing.

   By selecting Empty drawing, you can create an empty drawing and add drawing views in it afterwards. For more information about copying, moving or linking drawing views to another drawing, see Copy, move and link drawing views.

9. If you want to open the created drawings, select Open drawing.
10. Click Create.