Check changed marks, notes and dimensions and remove change symbols
Tekla Structures highlights the marks and dimension marks that have changed due to changes in the model, and dimension points that have been moved. Tekla Structures also highlights the changed angle dimensions, level marks, and associative notes.
Tekla Structures highlights the changes in the following way:
-
A change symbol (by default, a cloud) is drawn around the old point, the new point and the dimension values, or around the changed mark or note.
-
An arrow is drawn from the old dimension point to the new one.
Remove change symbols
After you have checked all the change symbols that Tekla Structures has created in your drawing, you can remove all of them or just the selected ones.
To remove the change symbols, do one of the following in the open drawing:
|
To |
Do this |
|---|---|
|
Remove all change symbols at one go |
|
|
Remove all dimension change symbols |
|
|
Remove the selected dimension change symbols |
|
|
Remove all mark change symbols |
|
|
Remove the selected mark change symbols |
|
|
Remove all associative note change symbols |
|
|
Remove the selected associative note change symbols |
|
Examples
The following image shows an example of a mark change symbol after a material change, and of a dimension change symbol after a change in the size of the part.
The following image shows the dimension text and the mark after you have selected .
The following image shows an example of a mark change symbol after a material change, and of a dimension change symbol after a change in the size of the part.
The follwoing image shows the dimension text and the mark after you have selected .
Related advanced options
There are some advanced options related to change symbols that you may want to use: