Create a uniform load

Tekla Structures
2021
Tekla Structures

Create a uniform load

Uniform load is an area load distributed uniformly on a polygonal area. The bounding polygon is defined by at least three corner points you pick. Uniform loads can have openings.

Before you start, shift the work plane if you need to create a load perpendicular to a sloped part.

  1. On the Analysis & design tab, click Load properties > Uniform load.
  2. In the Uniform Load Properties dialog box:
    1. Enter or modify the load properties.
    2. On the Distribution tab, select whether you want to attach the load to a part.
    3. Click OK to save the changes.
  3. On the Analysis & design tab, click Load > Uniform load.
  4. If you selected to attach the load to a part, select the part.
  5. Pick three corner points for the load.
  6. If needed, pick more corner points.
  7. Pick the first point again.
  8. If you want to create an opening:
    1. Pick the corner points of the opening.
    2. Pick the first point of the opening again.
  9. Click the middle mouse button to finish picking.
Esta informação foi útil?
Anterior
Seguinte