2nd order linear - Simply supported beam

Tekla Structural Designer
2020
Tekla Structural Designer

2nd order linear - Simply supported beam

Problem definition

Determine the mid-span deflection and moment of the simply supported beam under transverse and tensile axial load.

Assumptions

Shear deformations are excluded. Results are independent of cross section area; therefore any reasonable value can be used. The number of internal nodes varies from 0-9.

Key results

The theoretical value for deflection and moment are calculated as:

Where U is a variable calculated:

Table 1.
No. internal nodes Solver deflection Solver deflection % Solver moment Solver moment %
1 -0.116 0.734 % -0.901 8.631 %
3 -0.115 0.023 % -0.984 0.266 %
5 -0.115 0.004 % -0.986 0.042 %
7 -0.115 0.001 % -0.986 0.013 %
9 -0.115 0 % -0.986 0.005 %

Conclusion

As the element is subdivided the result converges to the correct theoretical value.

Reference

Timoshenko. S. 1956. Strength of Materials, Part II, Advanced Theory and Problems. 3rd Edition. D. Van Nostrand Co., Inc. New York, NY.

Esta informação foi útil?
Anterior
Seguinte