Cross (4)

Cross (4) connects two beams that cross each other by using a profile welded to one of the beams. The beams should not collide with each other. Both horizontal and vertical angles between the profiles can vary.

Objects created

Profile
Welds

Use for


Situation	Description
	Two beams connected with a welded profile.

Selection order

Select the main part (beam).
Select the secondary part (beam).

The connection is created automatically when the secondary part is selected.

Part identification key


	Description
1	Profile

Picture tab

Use the Picture tab to define the connection dimensions.

Secondary part cut


Option	Description
	Define the secondary beam close end cut from the main beam center line. By default, the secondary beam is not cut.

Parts tab

Use the Parts tab to define the part properties.

Parts


Option	Description
Profile	Select the profile from the profile catalog.


Option	Description	Default
Pos_No	Prefix and start number for the part position number. Some components have a second row of fields where you can enter the assembly position number.	The default part start number is defined in the Components settings in File menu > Settings > Options.
Material	Material grade.	The default material is defined in the Part material box in the Components settings in File menu > Settings > Options.
Name	Name that is shown in drawings and reports.