Fitting (13)

Tekla Structures
Modificado: 29 Out 2024
2024
Tekla Structures

Fitting (13)

Fitting (13) connects a beam to a beam using welds.

Objects created

  • Stiffeners (2) (optional)

  • Welds

Use for

Situation

Description

Fitting connection without stiffeners.

Fitting connection with upper and lower stiffener.

Selection order

  1. Select the main part (beam).

  2. Select the secondary part (beam).

    The connection is created automatically when the secondary beam is selected.

Part identification key

Part

1

Upper stiffener

2

Lower stiffener

Picture tab

Use the Picture tab to control the fitting dimensions.

Dimensions

Description

1

Stiffener horizontal distance from the secondary beam edge.

2

Stiffener vertical distance from the secondary beam edge.

3

Distance between the main beam and the secondary beam.

Option Description
Max gap allowed to end plate Enter the tolerance value for fitting the secondary part.

Use this option when the secondary part is skewed. The gap is calculated using the skew angle and the height of the secondary profile.

If the gap is within the tolerance value, the secondary part is fitted in the main part coordinate system. When the defined maximum gap is greater than the actual gap in the model, the secondary part is fitted in the secondary part coordinate system.

Weldings Select whether welds are created.

Welds are created when you select Yes. The default is that welds are not created.

Parts tab

Use the Parts tab to control the stiffener properties.

Stiffener

Part

Description

Upper stiffeners

Thickness, width, and height of the upper stiffener.

Lower stiffeners

Thickness, width, and height of the lower stiffener.

Option

Description

Default

Pos_No

Prefix and start number for the part position number.

Some components have a second row of fields where you can enter the assembly position number.

The default part start number is defined in the Components settings in File menu > Settings > Options.

Material

Material grade.

The default material is defined in the Part material box in the Components settings in File menu > Settings > Options.

Name

Name that is shown in drawings and reports.

General tab

Click the link below to find out more:

General tab

Design tab

Click the link below to find out more:

Design tab

Analysis tab

Click the link below to find out more:

Analysis tab

Esta informação foi útil?
Anterior
Seguinte