Part cut (44)

Not version-specific

Tekla Structures

Environment

Construsoft European

You can use system component Part cut (44) to create a connection between 2 profiles. The cross section of the first picked profile is used to cut the second picked part.

Objects created

A connection between 2 profiles.

Before you start

The component is created as a connection by selecting a main part and one or more secondary parts. The selection of secondary parts should be closed with the middle mouse button.

Picture tab

Option	Description
1	Define whether and how to include the secondary part in the assembly. Options: Weld Cast unit No action
2	Define whether the component explodes automatically once the connection is being created.
3	In some situations it is recommended to use an extra "Fit part end" to extend the secondary part, or to shorten it.
	Image	No extra "Fit part end".
	Image	"Fit part end" at the top of the main part. An extra offset can be defined to move the "Fit part end" in either positive or negative direction.
	Image	"Fit part end" in the middle of the main part. An extra offset can be defined to move the "Fit part end" in either positive or negative direction.
	Image	"Fit part end" at the bottom of the main part. An extra offset can be defined to move the "Fit part end" in either positive or negative direction.
4	Define the name of the negative volume. This name can be used for several purposes. Standard the name of the main part will be used. Several timber machines do need a certain name so the machine knows what to do.
5	Define the gap related to the main part.

About tab

Information about the "build" date of the tool. This date may differ from the date in the tool you are using, but the content may nevertheless be the same. This date may be required when you contact the helpdesk.

All rights reserved. No conclusions can be associated to the representation of the pictures in relation to the operating systems under which Tekla Structures runs.

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.