Create concrete member schedule drawings

Tekla Structural Designer
2021
Tekla Structural Designer

Create concrete member schedule drawings

Concrete member schedule drawings include concrete beam schedules, concrete column schedules and concrete wall schedules. In beam schedule drawings, the reinforcement is listed on a span by span basis, and contractors or specialist detailing firms can use the information to produce the necessary bar bending schedules. As for concrete column schedule drawings, they display a cross section through each stack of the selected columns, and if necessary, allow you to include a reinforcement quantity table. Concrete wall schedule drawings display a cross section through each stack of the selected walls, and if necessary, also allow you to include a reinforcement quantity table

Note:
Before you create a schedule drawing, ensure that the current drawing options meet your needs by doing the following:
  1. On the Draw tab, click Settings

    The Model Settings dialog box opens on the Drawings page.

  2. Go to Settings.
  3. Adjust the drawing options on the sub pages according to your needs.
  4. Click OK.

Create concrete beam schedule drawings

You can create beam schedule drawings by building, by floor or by selected beams. The information shown in the schedule is based on the different design groups. Beam schedule drawings are created in dxf format even though they do not include graphical information, so that you can add them to beam detail drawings.

  1. Open a 2D scene view of a part displaying the beams that you want to include in a schedule. The part can be, for example, a construction level, frame, or sub model.
  2. On the Draw tab, click Beam Schedule.
    Note:

    If the Beam Schedule command is not active, ensure that you are in a 2D scene view that is displayed in 2D.

    The DXF Export Preferences dialog box opens.

  3. Select the layer configuration and layer style for the drawing.
  4. Set the drawing scale.
  5. If necessary, to adjust the distance between independent lines of text, modify the minimum text block spacing.
  6. Do one of the following:
    • Accept the automatic file name.
    • Clear the Use automatic file name option and name the file yourself.
  7. Click OK.

    The drawing opens in an available DXF application.

    Note: If preferred this drawing variant can be created as a batch, (allowing multiple drawings to be created on a single drawing sheet).

Create concrete column schedule drawings

  1. Open a 3D view or a frame view displaying the columns that you want to include in the schedule.
  2. On the Draw tab, click Column Schedule.

    The Select column schedule content dialog box opens.

  3. Select the columns to be included and click OK.

    The DXF Export Preferences dialog box opens.

  4. Select the layer configuration and layer style for the drawing.
  5. Set the drawing scale.
  6. If necessary, to adjust the distance between independent lines of text, modify the minimum text block spacing.
  7. Do one of the following:
    • Accept the automatic file name.
    • Clear the Use automatic file name option and name the file yourself.
  8. Click OK.

    The drawing opens in an available DXF application.

    Note: If preferred this drawing variant can be created as a batch, (allowing multiple drawings to be created on a single drawing sheet).

Create concrete wall schedule drawings

  1. Open a 3D view or a frame view displaying the walls that you want to include in the schedule.
  2. On the Draw tab, click Wall Schedule.

    The Select wall schedule content dialog box opens.

  3. Select the walls to be included and click OK.

    The DXF Export Preferences dialog box opens.

  4. Select the layer configuration and layer style for the drawing.
  5. Set the drawing scale.
  6. If necessary, to adjust the distance between independent lines of text, modify the minimum text block spacing.
  7. Do one of the following:
    • Accept the automatic file name.
    • Clear the Use automatic file name option and name the file yourself.
  8. Click OK.

    The drawing opens in an available DXF application.

    Note: If preferred this drawing variant can be created as a batch, (allowing multiple drawings to be created on a single drawing sheet).
Czy to było pomocne?
Wstecz
Dalej