India Environment Concrete Roles Help

Tekla Structures
2020
Tekla Structures
India help
India environment
India Environment help
Concrete Help
India Environment Concrete Roles Help
Environment
India

General Instructions

1. This article explains all available settings (like reports, filters, view properties, etc.) in India Environment pertaining to Concrete segment.  
2. Model Template "4D Concrete Model" available in India Environment contains model objects and data to practice or learn the settings listed in this article.
3. Settings in 'common' environment folders and some 'standard' settings which are system defaults are not listed in this article.
4. Anytime, user could modify these settings or create new according to their project requirements. 

Model Settings

1.1 Filters
     1.1.1 View and Selection Filters
     1.1.2 Object representation Filters
     1.1.3 Object representation Settings
1.2 Reports
1.3 Organizer
     1.3.1 Categories
     1.3.2 Object Browser
     1.3.3 Organizer Filters
1.4 Numbering settings
1.5 Options
1.6 Reinforcing bar settings
1.7 Profiles and Materials
1.8 Model Attributes
1.9 Export Settings
1.10 Custom Components
1.11 Custom Enquiry
1.12 View Properties

1.1 Filters

1.1.1 View and Selection Filters

Below listed are the view & selection filters available for Concrete Users in India Environment. Some filters mainly created for object representation purpose are listed in this table 1.1.2   

SI.No

Filter Name

You can view/select

Folder

1

CIP_Beam

It allows you to select or view Cast Units with name "BEAM" and Assembly type 1

General

2

CIP_Beam_Column

It allows you to select or view Cast Units with name "BEAM" or "COLUMN"and Assembly type 1 General

3

CIP_Column It allows you to select or view Cast Units with name "COLUMN"and Assembly type 1 General

4

CIP_Footings It allows you to select or view Cast Units with name equals or contains "FOOTING" and Assembly type 1 General

5

CIP_Pedestal It allows you to select or view Cast Units with name "PEDESTAL"and Assembly type 1 General

6

CIP_Pile It allows you to select or view Cast Units with name "PILE"and Assembly type 1 General

7

CIP_Slabs It allows you to select or view Cast Units with name contains "SLAB"and Assembly type 1 General

8

CIP_Strip_Footings It allows you to select or view Cast Units with name "STRIP_FOOTING"and Assembly type 1 General

9

CIP_Wall It allows you to select or view Cast Units with name contains "WALL" or "PANEL"and Assembly type 1  General
10 standard It allows you to select or view all objects in the model  General
11 I_Surface_Attached_To_Pour It allows you to select objects of Type =Surface, Template Attached to = 1 General
12 I_Surface_Attached_To_Part It allows you to select objects of Type =Surface, Template Attached to = 0 General
13 anchor It allows you to select objects of Material type = CONCRETE and
Part NAME starting with COLUMN or FOOTING
General
14 3-Concrete_filter It allows you to select objects of Material type = CONCRETE and
Object Type = Assembly
General
15 3-Precast_filter It allows you to select objects of Material type = CONCRETE,
Object Type = Part and Assembly Type = 0 (it represents cast unit type is Precast)
General
16 3-CIP_filter It allows you to select objects of Material type = CONCRETE,
Object Type = Part and Assembly Type = 1 (it represents cast unit type is Cast In Place)
General
17 cip-stirrup It allows you to select or view Rebar with name contains "STIRRUP" or "STIRRUPS" Concrete
18 Object - Embeds It allows you to select or view Part or Rebar with Class 100 (Embeds) Concrete
19 Object Type - Item It allows you to select or view Part with Name "ITEM" and Profile "Default"  Concrete
20 Object Type - Pour Object It allows you to select or view Object of Type "Pour object"  Concrete
21 Object Type - Pour Unit It allows you to select or view Object of Type "Pour unit" Concrete
22 Object Type - RebarSet It allows you to select or view Rebar with Template IS_REBAR_SET = 1 to select Rebarset bars Concrete
23 Surface_Attached_to_Part It allows you to select or view Surfaces with template "ATTACHED TO" = 0 Concrete
24 Surface_Attached_to_Pour It allows you to select or view Surfaces with template "ATTACHED TO" = 1 Precast
25 PC-beams It allows you to select or view Parts with name "BEAM" and Material Type "CONCRETE" Precast
26 PC-columns It allows you to select or view Parts with name "COLUMN" and Material Type "CONCRETE" Precast
27 PC-concrete It allows you to select or view Parts with Material Type "CONCRETE" Precast
28 PC-footingpad It allows you to select or view Parts with name "PAD-FOOTING" and Material Type "CONCRETE" Precast
29 PC-footings It allows you to select or view Parts with name "FOOTING" or "FOUNDATION" and Material Type "CONCRETE" Precast
30 PC-footingstrip It allows you to select or view Parts with name "STRIP-FOOTING" and Material Type "CONCRETE" Precast
31 PC-hollowcore It allows you to select or view Parts with name "HOLLOW CORE" and Material Type "CONCRETE" Precast
32 PC-matfoundation It allows you to select or view Parts with name "FOUNDATION" and Material Type "CONCRETE" Precast
33 PC-panels It allows you to select or view Parts with name "PANEL" and Material Type "CONCRETE" Precast
34 PC-piles It allows you to select or view Parts with name "PILE" and Material Type "CONCRETE" Precast
35 PC-slabs It allows you to select or view Parts with name "SLAB" and Material Type "CONCRETE" Precast
36 PC-walls It allows you to select or view Parts with name "WALL" and Material Type "CONCRETE" Precast
37 DF_nomesh It allows you to view Rebar Name does not contain "TOP" or "BOTTOM" Precast
38 DF_precast_class100101 It allows you to view Rebar with class 100 or 101  Precast
39 DF_precast_EB_wo_lifting It allows you to view Part with Class 100 or 101 and Name does not equal to LH* Precast
40 DF_precast_exclude-rebarsembeds It allows you to view Rebar with class not equal to 100 or 101 Precast
41 DF_precast_insulation It allows you to view Parts with MATERIAL_TYPE = MISCELLANEOUS Precast
42 DF_precast_liftinghooks It allows you to view Rebar with Name = LH Precast
43 DF_precast_rebar It allows you to view Rebar with class not equal to 100 or 101 Precast
44 Fabrication_finished It allows you to View only the Parts PLANNED_START_F earlier than Review date General
45 Erection_finished It allows you to View only the Parts PLANNED_START_E earlier than Review date General
46 Erection_due It allows you to View only the Parts PLANNED_START_E equal to Review date General




























 


















 

















































 
































 

Go to Top

1.1.2 Object Representation Filters:

Below listed are the Object representation filters available for Concrete Users in India Environment. Some filters mainly created for selection and view purpose are listed in this table 1.1.1   

Sl.No Filter Name Rules Folder
1 4D_pour_completed.PObjGrp Pour Unit with PLANNED_END_POUR = Review date General
2 4D_pour_completed
_Actual.PObjGrp
Pour Unit with ACTUAL_END_POUR = Review date General
3 4D_pour_in_progress.PObjGrp
Image
t16.JPG
General
4 CIP.PObjGrp Template- USERDEFINED.CAST_UNIT_TYPE Contains Cast in place
(or) Prefix = CIP 
ConstructionManagement
5 Task_0_24  Task Completeness > or = 0 and < or = 24.9  ConstructionManagement
6 Task_25_49 Task Completeness > or = 25 and < or = 49.9  ConstructionManagement
7 Task_50_74  Task Completeness > or = 50 and < or = 74.9  ConstructionManagement
8 Task_75_100  Task Completeness > or = 75 and < or = 100  ConstructionManagement
9 4D_ERECTION_COMPLETE
_ACTUAL_UDA
ACTUAL_END_E earlier or equal to Review date ConstructionManagement
10 4D_ERECTION_1DAY_COMPLETED
_REFE_UDA
PLANNED_END_E = Review date ConstructionManagement
11 4D_ERECTION_UNFINISHED
_ACTUAL_UDA
Image
T.JPG
ConstructionManagement
12 4D_ERECTION_UNFINISHED
_ACTUAL_REFE_UDA.PObjGrp
Image
T2.JPG
ConstructionManagement
13 4D_ERECTION_STORED
_UDA.PObjGrp
Cast Unit ERECTION_STATUS = 2.0 ConstructionManagement
14 4D_ERECTION_STORED_REFE
_UDA.PObjGrp
Reference object ERECTION_STATUS = 2.0 ConstructionManagement
15 4D_ERECTION_ONGOING_1WEEK
_UDA.PObjGrp
Image
t3.JPG
ConstructionManagement
16 4D_ERECTION_ONGOING_1WEEK
_TASK.PObjGrp
Image
t4.JPG
ConstructionManagement
17 4D_ERECTION_ONGOING_1DAY
_UDA.PObjGrp
Image
t5.JPG
ConstructionManagement
18 4D_ERECTION_ONGOING_1DAY
_REFE_UDA.PObjGrp
Image
t6.JPG
ConstructionManagement
19 4D_ERECTION_NOT-STARTED_ACTUAL
_UDA.PObjGrp
Image
t7.JPG
ConstructionManagement
20 4D_ERECTION_NOT-STARTED_ACTUAL
_REFE_UDA.PObjGrp
Image
t8.JPG
ConstructionManagement
21 4D_ERECTION_LATE_ACTUAL
_UDA.PObjGrp
Image
t9.JPG
ConstructionManagement
22 4D_ERECTION_LATE_ACTUAL
_REFE_UDA.PObjGrp
Image
t10.JPG
ConstructionManagement
23 4D_ERECTION_COMPLETED
_ACTUAL_UDA.PObjGrp
Cast Unit ACTUAL_END_E earlier or equal to Review date ConstructionManagement
24 4D_ERECTION_COMPLETED
_ACTUAL_REFE_UDA.PObjGrp
Reference object ACTUAL_END_E earlier or equal to Review date ConstructionManagement
25 4D_ERECTION_1WEEK_COMPLETED
_UDA.PObjGrp
Cast Unit PLANNED_END_E 7 days earlier than Review date ConstructionManagement
26 4D_ERECTION_1WEEK_COMPLETED
_TASK.PObjGrp
Task Planned end date 7 days earlier to Review date ConstructionManagement
27 4D_ERECTION_1WEEK_COMPLETED
_REFE.PObjGrp
Reference object PLANNED_END_E 7 days earlier than Review date ConstructionManagement
28 4D_ERECTION_1DAY_COMPLETED
_UDA.PObjGrp
Cast Unit PLANNED_END_E earlier than Review date ConstructionManagement
29 4D_ERECTION_1DAY_COMPLETED
_REFE_UDA.PObjGrp
Reference object PLANNED_END_E = Review date ConstructionManagement
30 4D_ONGOING_1DAY_UDA.PObjGrp
Image
t11.JPG
ConstructionManagement
31 4D_FABRICATION_ONGOING
_UDA.PObjGrp
Image
t12.JPG
ConstructionManagement
32 4D_FABRICATION_LATE
_UDA.PObjGrp
Image
t13.JPG
ConstructionManagement
33 4D_FABRICATION
_COMPLETED_ACTUAL
_UDA.PObjGrp
Cast Unit ACTUAL_END_F earlier or equal to Review date ConstructionManagement
34 4D_DESIGN_ONGOING
_UDA.PObjGrp
Image
t14.JPG
ConstructionManagement
35 4D_DESIGN_LATE
_UDA.PObjGrp
Image
t15.JPG
ConstructionManagement
36 4D_DESIGN_COMPLETED
_ACTUAL_UDA.PObjGrp
Cast Unit ACTUAL_END_D earlier or equal to Review date ConstructionManagement
37 Eng_Part_Material_Concrete Part MATERIAL = C* (Starts with C) Engineering

1.1.3 Object Representation Settings

Below Lisgted are the Object Representation Attribute settings available for Concrete Users in India Environment  

4D Pour In Progress.rep - General Folder (please refer this table for the filters used in these attributes) 
  • This settings could be used to show model objects in different color according to Pour Completion date against the review date.
  • Completed actual, Completed and Progress filters are conditioned here. 
Image
o4.JPG

CIP.rep - ConstructionManagement Folder (please refer this table for the filters used in these attributes) 
  • This settings could be used to show Cast In Place (CIP) model objects in different color.
Image
o5.JPG


4D Task Manager Status.rep - ConstructionManagement Folder (please refer this table for the filters used in these attributes) 
  • This settings could be used to show model objects in different color according to Task completion value.
  • Task Completeness value 0 to 24, 25 to 49, 50 to 74 and 75 to 100 are conditioned with different color. 
Image
o6.JPG


4D Status.rep - ConstructionManagement Folder (please refer this table for the filters used in these attributes) 
  • This settings could be used to show model objects in different color according to Fabrication, Erection and  Design completion date
Image
o7.JPG


4D Fabrication.rep - ConstructionManagement Folder (please refer this table for the filters used in these attributes) 
  • This settings could be used to show model objects in different color according to Fabrication (Ongoing, Completed and Late) date
Image
o8.JPG


4D Erection.rep - ConstructionManagement Folder (please refer this table for the filters used in these attributes) 
  • This settings could be used to show model objects in different color according to Erection (Stored, Completed and Unfinished) data
Image
09.JPG


4D Erection 1week UDA.rep & 4D Erection 1day UDA.rep - ConstructionManagement Folder (please refer this table for the filters used in these attributes) 
  • This settings could be used to show model objects in different color according to Erection (Completed 1 week (1 day) before and ongoing) data respectively.
Image
o10.JPG


 
Image
o11.JPG


4D Erection 1week TASK.rep - ConstructionManagement Folder (please refer this table for the filters used in these attributes) 
  • This settings could be used to show model objects in different color according to Erection (Task planned date1 week before and ongoing)
Image
o12.JPG


4D Designing.rep - ConstructionManagement Folder (please refer this table for the filters used in these attributes) 
  • This settings could be used to show model objects in different color according to Design date (Completed, ongoing and late)
Image
o13.JPG


4DPlayer.rep - ConstructionManagement Folder (please refer this table for the filters used in these attributes) 
  • This settings could be used to show model objects in different color according to Pour Comment value 1 and 0
Image
o15.JPG

1.2 Reports

Below are report files available for Concrete users in India Environment  
 

SI.No

Report Name

Select the below to generate the report

The report can be used to get the details of

Prerequisite(s) Folder

1

TS_Report_Inquire_Reinforcement.rpt

Reinforcement(s)

Gives report of basic information of Reinforcement when inquired.

Valid reinforcement General

2

TS_Report_Inquire_Cast_Unit.rpt Cast Unit(s) Gives report of basic information of Cast unit when inquired Cast unit with parts having valid geometry General

3

Rebar - Single Bar Bending List.rpt Reinforcement(s) Creates report for individual reinforcements Valid Rebar with upto date numbering General

4

Rebar - Group Bending List - Extended.rpt Reinforcement(s) Creates report for normal and varying group rebar Valid Rebar with upto date numbering General

5

Rebar - Group Bending List - Compact.rpt Reinforcement(s) Creates report for normal and varying group rebar in compact format Valid Rebar with upto date numbering General
6 pile_list.rpt Part(s) Creates report for Parts with Main part name = Pile Valid member with Name "Pile" General
7 Part_list_IND.rpt Part(s) Creates report for Parts with Weight, Volume, Profile, Material and Position number.  Valid Part with upto date numbering General
8 TS_Report_Inquire_Part.rpt Part(s) Gives report of basic information of Part when inquired Valid Part General
9 TS-Material_list (html) (excel) (csv).rpt Part(s) Creates material wise report for Parts in html, excel and csv format Valid Part General
10 TS-Drawing_list.rpt (html) (excel) Drawings Creates list of drawing with information like Drawing Title, Created date, Drawing number, etc.  Drawings General
11 Surfacing_Types.rpt Surfacetreatment Creates list of surfacing with basic information based on Surface Type Surfacetreatment General
12 Surfacing.rpt Surfacetreatment Creates list of surfacing with detailed information Surfacetreatment General
13 Surface_Object_Code.rpt Surface/ Surfacetreatment Creates list of surfacing with basic information and number of Parts attached to  Surface/ Surfacetreatment General
14 Surface_Object.rpt Surface/ Surfacetreatment Creates list of surfacing with basic information Surface/ Surfacetreatment General
15 STAAD_Column_report.rpt Converted Tekla Elements Creates list of Tekla column (vertical) elements with ID for easy selection of all Beams in Model  Tekla Parts General
16 STAAD_Beam_report.rpt Converted Tekla Elements Creates list of Tekla beam (horizontal) elements with ID for easy selection of all Beams in Model  Tekla Parts General
17 STAAD.cnv.rpt Staad Elements Creates mapping file for imported STAAD elements Staad Elements General
18 Q_Model_History_Report.rpt Part(s) Creates model history report for Parts Valid Part General
19 Id_select_part_position.rpt Part(s) Created Part information list against its ID with PArt Postion number for easy selection  Part with upto date numbering General
20 Id_select_part_list.rpt Part(s) Created Part information list against its ID Part with upto date numbering General
21 Drawing_list.rpt Drawings Creates drawing list inforamation with detailed data Drawing  General
22 Drawing_Revision_Info (Excel).xls.rpt Drawings Creates revision information list for darwings Drawings with revisions General
23 4D-Ifc_Fabrication.csv.rpt IFC objects Creates IFC fabrication information with ACTUAL and PLANNED date IFC objects with workflow date General
24 4D-Ifc_Erection.csv.rpt IFC objects Creates IFC erection information with ACTUAL and PLANNED date IFC objects with workflow date General
25 4D-Ifc_Design.csv.rpt IFC objects Creates IFC design information with ACTUAL and PLANNED date IFC objects with workflow date General
26 IFC-QTO.xls.rpt IFC objects Creates report of the objects with basic information like Length, Width, Are, Volume, et. IFC objects General
27 4D-Concrete_Fabrication.csv.rpt Part(s) Creates report for Parts with Planned and Actual Start and End Fabrication date and Fabrication comments.  Valid Part with upto date numbering Concrete
28 4D-Concrete_Erection.csv.rpt Part(s) Creates report for Parts with Planned and Actual Start and End Erection date and Erection comments.  Valid Part with upto date numbering Concrete
29 4D-Concrete_Design.csv.rpt Part(s) Creates report for Parts with Planned and Actual Start and End Design date and Design comments.  Valid Part with upto date numbering Concrete
30 tapered_bending_list.rpt Reinforcement(s) Creates report for tapered rebar with individual single abr IDs and dimensions Valid Rebar with upto date numbering Concrete
31 Rebar_usage_report.rpt Reinforcement(s) Creates report for Rebar usage (Main bar or Tie) Valid Rebar with upto date numbering Concrete
32 Rebar List.html.rpt Reinforcement(s) Creates reports for Rebar list in html format  Valid Rebar with upto date numbering Precast
33 Rebar_list.rpt Reinforcement(s) Creates reports for Rebar list with unit weight and total weight details Valid Rebar with upto date numbering Concrete
34 Rebar_BBSpullout.xls.rpt Reinforcement(s) Creates Bar bending schedule in excel format with pullout images from folder \Environments\India\General\template\settings\shapes Rebar with upto date numbering and respective shape image in the folder.  Concrete
35 Rebar_BBS(Excel).xls.rpt Reinforcement(s) Creates Bar bending schedule in excel format Valid Rebar with upto date numbering Concrete
36 RebarThreadLength.rpt Reinforcement(s) Creates report for rebar with Start and End thread length details Valid Rebar with coupler UDA Concrete
37 RebarSeqNumberData.rpt Reinforcement(s) Creates report for rebar with Rebar sequence number data Valid Rebar with upto date numbering Concrete
38 RebarBendingListWithSingleBars.rpt Reinforcement(s) Creates report for numbered and un-numbered Tapered and non-tapered bars  Tapered or non tapered Rebar group Concrete
39 RebarExtraFabricationLength.rpt Reinforcement(s) Creates report for rebar with Start and End Extra length details Valid Rebar with coupler UDA Concrete
40 Precast Component List.rpt Component(s) Creates report for connection details line connection name, connecting member, Id, etc.  Precast connection in precast member Precast
41 Pour_Wise_Surfaces.rpt Pour(s) Creates pour wise surface information like surface area, volume, etc Surface area applied to pours with valid pour number  Concrete
42 Pour_Wise_Rebar_List.pdf.rpt Pour(s) Creates pour wise rebar list with schedule information and pullout picture Pour units with valid Rebar Concrete
43 Pour_List.rpt Pour(s) Creates pour wise report with volume, member, etc. Pour units with number, mix and pour information  Concrete
44 Pour_Content_List.rpt Pour(s) Creates pour list with pour and surface information Pour units with number, mix and pour information  Concrete
45 parts_not_in_cast_unit.rpt Part(s) Creates report to list plates, angles, etc. not attached to Cast Unit Angles, Plates/ Inserts Concrete
46 Id_select_castunit_position.rpt Cast Unit(s) Create list of Cast Unit with position number, weight, volume, etc. against Id for selection Cast units with numbering Concrete
47 Cast_unit_rebar_only_list.rpt Cast Unit(s) Creates report for rebar schedule cast unit wise. Castunit with Reinforcement  Concrete
48 Cast_unit_list_excel.csv.rpt Cast Unit(s) Creates cast unit list with weight, volume information in Excel format Cast units with numbering Concrete
49 Piece Tag.html.rpt Part(s) Creates report of piece tag with project number, cast unit position number and Phase.  Cast unit with project number and phase. Precast
50 Cast_unit Lot List.rpt Cast Unit(s) Creates cast unit list with Lot number Cast unit with Lot number Precast
51 Embed List.rpt Part(s) / Embed(s) Creates list of Embedment in the model  Embeds in model  Precast
52 Eng_Pile_List.rpt Part(s) Creates list of Piles with basic information  Part Name = PILE Engineering
53 Eng_Material_Report.rpt Part(s) Creates material report for parts Valid Part Engineering
54 Eng_Design_Forces.rpt Part(s) Creates report for Part SHEAR 1, 2 AXIAL 1, 2 MOMENT 1, 2 against GUID Valid Part with Forces data Engineering
55 Eng_Checklist_Slab_Top_Levels.rpt Part(s) Creates Slab list with quantity and Top level  Valid Slab Engineering
56 Eng_Checklist_PartNames_Summary.rpt Part(s) Creates Partlist with quantity and Name  Valid Part Engineering
57 Eng_Checklist_PartNames_Full.rpt Part(s) Creates Partlist with quantity, Name, Profile, etc. Valid Part Engineering
58 Eng_Checklist_Column_Locations.rpt Part(s) Creates Column list with X and Y co-ordinate  Valid Column  Engineering
59 Eng_Checklist_Columns.rpt Part(s) Creates Column list with basic data like Grid location, Profile, Top/ Bottom level, etc.  Valid Column Engineering
60 Eng_Checklist_Beam_Levels.rpt Part(s) Creates Beam list with Top level  Vaid Beam Engineering
62 Eng_Checklist.rpt Part(s) Creates Part list with basic data like Name, Profile, Material, etc. against GUID Valid Part Engineering















 





























































































































 

 

Go to Top 

1.3 Organizer

1.3.1 Categories

Concrete Grade: The category automatically collects all member data and categories based on Concrete Grade as shown in below image. The selection is "Assembly" for this category.

 

Image
Org1.png

Embeds: The category automatically collects all embeds in the model and categories based on its Name as shown in below image. The selection is "Part" for this category.
 
Image
Org2.png


Pours: The category automatically collects Pour units  in the model and categories based on Pour number as shown in below image. The selection is "Pour" for this category.

 
Image
Org3.PNG


Reinforcing Bar Size: The category automatically collects all rebar in the model and categories based on its Size(diameter) as shown in below image.

 
Image
Org5.PNG


Reinforcing Bar shapes: The category automatically collects all rebar in the model and categories based on its Shape as shown in below image.

 
Image
Org4.PNG


 1.3.2 Object Browser - Property Templates (General Folder)

Cast Unit List.propertytemplate - Selection: Cast Unit
 
Image
b1.JPG


Default.propertytemplate - Selection: Part/ Cast Unit
 
Image
B2.JPG


DrawingsFromModel.propertytemplate - Selection: Cast Unit
 
Image
b3.JPG


IFC.propertytemplate -  Selection: IFC objects
 
Image
b4.JPG


Layout Points.propertytemplate - Selection: Layout points
 
Image
b5.JPG


Quantity takeoff.propertytemplate - Selection: Parts
 
Image
b6.JPG


Rebar Schedule.propertytemplate - Selection: Rebar/ Rebar group/ Rebarset
 
Image
b7.JPG


Surface treatments.propertytemplate - Selection: Surface(s)/ Surface treatment(s)
Image
b8.JPG

1.3.3 Organizer Filters  (Refer Table 1.1 for other filters)

General Folder

  • ob_CastUnit.OrgObjGrp - It filters out Cast Units in the model (Assembly type =1)

  • ob_Precast.OrgObjGrp - It filters out all Precast elements in the model (Assembly type =0)

  • ob-Reinforcement.OrgObjGrp - It filters out Rebars in the model (Object Type = Rebar)

  • ob-Part.OrgObjGrp - It filters out all parts in the model (Object Type = Part)

  • ob_Embeds.OrgObjGrp - It filters out all embeds in the model (Parts and Rebar with Class = 100)


Concrete Folder

  • ob_Rebarcomponents.OrgObjGrp - It filters our all Rebar components in the model (object type = 4)

  • ob_pours.OrgObjGrp - It filters all pour objects (Object type = Pour)

1.4 Numbering settings:

Synchronize with master model option (Save-numbering-save) kept as "On" in "Standard" attribute file - (Standard.num in "General > Model settings" folder)

 
Image
7.png


Apart from Standard, five more attribute settings are available in "General > Model settings" folder
 
Image
numbering attr.png


1_Initial_Numbering.num: Apply this settings for the first time when you run numbering. This will freshly start numbering for All objects | Highlight: Renumber All option is ON.

2_Before_Creating_Drawings.num: Apply this settings after the first numbering or before drawing creation | Highlight: Renumber All option is OFF and Reuse Old Number option is ON. 

3_After_Creating_Drawings.num: Apply this settings after drawings are created |  Highlight: Keep Number if Possible option is selected for Modified objects. 

4_After_Issuing_Drawings_for_Fab.num: Apply this settings after all or some drawings are issued for fabrication or production | Highlight: Reuse Old Number option is OFF. 

Restart_Numbering.num: Apply this settings to revise all numbering from the beginning. Position numbers might not be same or retain the number after this action | Highlight: Renumber All option is ON and Reuse Old Number option is ON. 

1.5 Options

File > Settings > Options

1.5.1 Units: We are maintaining Metric units for Modeling, Catalogs and Analysis results as shown in below images. 

Modeling:
 
Image
options1.PNG

Catalogs:
 
Image
options2.PNG

Analysis results:
 
Image
options3.PNG


1.5.2 Rebarset

Precast Detailer and Rebar Detailer Role: Concrete cover values for global and local coordinate system is defined in Standard Attribute file as shown in below snap shot. 

Rebar Detailer Role: Apart from the cover values the Layer Prefix are also defined in Standard Attribute file as shown in below snap shot. By default if you are not getting please press "Load" button as highlighted in below snap. 

 
Image
rebarset ops.PNG


Rounding and Step tapering: 

Rounding of straight bar is set to Up 5mm and bend bars are set to Down 5mm to avoid increase in length for fitting bars as most of the bend bars are fitting bars like stirrups, lacer bars, etc. 
Step tapering is not defined in options. It could be defined for individual bar in Rebar properties window. 

 
Image
rounding.PNG


1.5.3 Clash Check

Clash check tolerance is kept as 0 to detect all clashes between rebar. Minimum clear cover is set to 25mm. 
 
Image
clash ops.PNG


1.5.4 General

Default adaptivity is set to Fixed to retain normal detailing practice of copying rebar to another member. 
 
Image
adapti.PNG

1.6 Reinforcing bar Settings:

1.6.1 Rebar Shape Rules

Default Tekla Structures shape rules are followed for India Environment with Shape codes as shown in below snap shot.
However we can use Shape codes as per IS2502 Code provisions if we use the Model Template IS2502 Rebar Shapes.

Shape Rules when not using Model Template:
 
Image
shapes1.PNG


Shapes while using IS2502 Rebar Shapes Model Template
Image
is2502.png
 
Image
shapes2.PNG

Curve tolerance

1. ‘Curve tolerance’ is available in ‘Tolerances’ tab page in ‘Rebar shape manager’.
2. This value is used to recognize the ‘arc’ in a rebar having multiple sequential bending.
3. It is defined as 20mm for India environment, you can see the difference with below example.
 
Image
7.1.PNG
 
Image
7.2.PNG

Arc Radius

The Rebar shape manager has been changed so that multiple sequential bends which are forming an arc are combined into one or more bends (90 degree or less) with the arc radius.
If you take the above example, the same bar is now changed to an arc. So arc radius is available directly for reporting as shown in below snap shot.
 
Image
arc radius.png

1.6.2 Rebar Database File

Note:

Tekla Structures stores Rebar Catalog information in Rebar_database.inp file.
From version 2020, the Rebar catalog could be easily edited, import/ export using user friendly interface.
Please click this link to know more.

Below are the Rebar Grades available in India Environment (Main & Tie/Stirrup):
Nominal & Actual diameter of Rebar, Bending Radius, per meter Weight & Standard Hook values are defined for each Rebar in this file.
 
Image
grades.PNG


For Rebar Detailer Role, the Standard Lap length for Normal lap and Crank lap with standard Crank ratio for every Rebar Diameter is also defined in the Database file.
These values are used in Splitter in Rebarset. 
 
Image
database.PNG


When we use the model template IS2502 Rebar Shapes, it uses its dedicated Database file from model folder as per IS2502 code book.
Copy of  the file is available as rebar_database_2502.inp in General > Profil Folder

Normal Lap:

Image
lap2.PNG

Crank Lap: 
Image
lap1.PNG

1.6.3 Other Rebar Settings and Attributes files:

End detail modifier – Cranking

Attribute(s): Crank End.rst_edm

You can use this attribute settings to have crank at end detail modifier.

 

Image
2.1.png
     
Image
2.2.png

Face specific concrete covers:

Attribute(s): Concrete cover.srfo

You can provide concrete cover in surface properties for particular face using this option.
 
Image
3.png

Property modifier standard file

Attribute(s): standard.rst_pm

Default Rebar set standard file creates Rebar of size 12 and class 3. So, the property modifier standard file is set to create Rebar of size 20 and class 2.



 
Image
4.1.png
     
Image
4.2.png

Go to Top 

1.7 Profiles and Materials

Hollow core profiles are available for Precast Detailer Role
 
 
Image
2.png


Material added to Environment: Neoprene
 
Image
mat.JPG

1.8 Model Attributes 

Beam attribute(s): 

  • CIP_Beam.cbm – Cast unit type is set to “Cast In Place” – You can use this attribute to create Cast-In-Situ beam.
  • Precast_beam.cbm - Cast unit type is set to “Precast” – You can use this attribute to create precast beam.
  • DoubleTee_Beam.cbm – TT profile is used – You can use this attribute to create TT beam.
  • HollowCore_Beam.cbm – HCS 160 profile is used – You can use this attribute to create Hollow-core beam.
  • I_Beam.cbm - II profile is used – You can use this attribute to create I beam.
  • Inverted_T_Beam.cbm - RCDL profile is used – You can use this attribute to create inverted T beam.
  • L_Beam.cbm - RCL profile is used – You can use this attribute to create Ledger beam.
  • Trench.cbm – U Profile is used – You can use this attribute to create Trench. 

Column attribute(s): Circular_Column.ccl - Circular Profile (D) is used – You can use this attribute to create circular column quickly.

Pad Footing attribute(s): Circular_Footing.cpf - Circular Profile (D) is used – You can use this attribute to create circular footing quickly.

Spiral Beam attribute(s): RAMP.csb – Rectangular profile is used – You can use this to create Ramp with appropriate dimensions.

Bar Group attribute(s):

  • standard.rbg, bottom_bar.rbg, main_bar.rbg: A sample properties with Fe415 and Fe500D grade of rebar with unique NAME.
  • stirrup.rbg: The Bar size and grade is selected from the tree view. The type “Tie or Stirrup” is selected.
  • stirrup.rbg: You can use this to model Tie or stirrup by changing Diameter with drop down list in the rebar properties pane.

Single Rebar attribute(s): standard.rbr: Default single bar carries zero cover value on all sides, so you can place exactly where the single bar is required without further adjustment of covers.

Curved Rebar attribute(s): standard.rcu: Fe415 grade is default. Start and End cover made as Zero and group spacing is defined as Target spacing 200mm.

Circular Rebar attribute(s): standard.rci: Fe415 grade is default (Tie/Stirrup)

Strand Pattern attribute(s)standard.rbs: Number of cross section is set to 1 instead of 2. So, it will be easy for you to model for the first time. 

Below Co-ordinate System settings are set for  Layer Settings as defined in  Options (1.5.2) 

Default Settings: Attribute file “standard”

Co-ordinate system for cover is set to Global for Pad Footing to get proper layer prefix.
Image
image.png

Default Settings: Attribute file “standard”

Co-ordinate system for cover is set to Global for Beam to get proper layer prefix.
Image
image.png

Default Settings: Attribute file “standard”

Co-ordinate system for cover is set to Global for Strip Footing to get proper layer prefix.
Image
image.png

Default Settings: Attribute file “standard”

Co-ordinate system for cover is not set to Columns, because the side bars and corner bars are named separately for columns.
Image
image.png

Default Settings: Attribute file “standard”

Co-ordinate system for cover is set to Local for Wallpanel to get proper layer prefix.
Image
image.png

Default Settings: Attribute file “standard”

Co-ordinate system for cover is set to Local for Slab to get proper layer prefix.
Image
image.png

1.9 Export Settings

1.9.1 IFC Export

Apart from Standard attribute, below settings are available while exporting Model to IFC. Export type and additional property set varies with different setting file. 
  • ArchiCAD.IFCExportPlugin.MainDialog.xml
  • Esti_modelling.IFCExportPlugin.MainDialog.xml
  • NavisWorks.IFCExportPlugin.MainDialog.xml
  • PlancalNova.IFCExportPlugin.MainDialog.xml
  • RevitCoordination.IFCExportPlugin.MainDialog.xml
  • Solibri.IFCExportPlugin.MainDialog.xml
Additional Propertyset settings:
Image
aps.png

1.9.2 Unitechnik Export 

Attribute file: Simplified-contour.m160000079 added for new export CONTOUR option for simplifying external contour.
Image
unitech.png

1.9.3 Eliplan Export

System component, "Hollow core reinforcement strands" is usually used to write the strand code.
For users who do not use that particular system component store the strand code with other UDA.
So, for manual strand, new attribute file is created with the selection of UDA in strand code: Manual_Strand_uda.m170000068
Image
eliplan.png

1.10 Custom Components

Click this Support Article Link to know more about the Custom components available in India Environment. 

1.11 Custom Inquiry

General Folder 

rebartapered.it 
 
Image
37.PNG


RebarBasic.it
 
Image
38.PNG


RebarAdvanced.it
 
Image
39.PNG


profileinformation.it
 
Image
40.PNG


partinformation.it
 
Image
41.PNG


Levels.it
 
Image
42.PNG


IFC Revit.it

ConstructionInfo.it

 
Image
43.PNG


concrete_takeoff.it
 
Image
44.PNG


4D status.it
 
Image
48.PNG


4D Fabrication.it
 
Image
45.PNG


4D Erection.it
 
Image
46.PNG


4D Design.it
Image
47.PNG
1.12 View Properties

General Folder

standard.mvi

 
Image
49.PNG


Plan.mvi
 
Image
50.PNG


Part label_Selected.mvi
 
Image
51.PNG


Part label_Mainpart for all.mvi
 
Image
52.PNG


Part label_Main part for Selected.mvi
 
Image
53.PNG


Elevation.mvi
 
Image
54.PNG


basic_view.mvi
 
Image
55.PNG


3D_Rendered.mvi
 
Image
56.PNG


3d_only_parts.mvi
Image
57.PNG

Drawing Settings

2.1 GA Drawing Properties 

BBS.gd (Concrete folder)

  • This settings could be used to create Bar bending schedule in GA drawing.
  • It uses the following templates: IS_BBS, Rebar_Summary and Rebar_Summary_Heading
Image
d7.JPG

RC-Plan.gd (Concrete folder)

  • This settings could be used to create footing and column layout.
  • It has filtered out Slab and Part mark is turned off for Columns using object level settings. 
  • Part mark "Cast Unit position number" is called for the main parts. 
  • Rebar for other members are shown
Image
d6.JPG

RC-FOUNDATION.gd (Concrete folder) 

  • This settings could be used to create foundation layout with rebar information.
  • Part mark "Cast Unit position number" and "Thickness of Footing" are called for the main parts.
  • It uses Footing schedule template to list the footing main and secondary bar. The bar naming like T1, T2, B1, B2 needs to be followed for this.
Image
d5.JPG

RC-ELEVATION.gd (Concrete folder) 

  • This settings could be used to create elevation view in GA drawing.
  • The part mark for slab and pedestals are removed using object level settings.
  • Part mark "Cast Unit position number" and "Profile" called for other main parts. 
Image
d4.JPG

RC-A1-SLAB-LAYOUT.gd (Concrete folder) 

  • This setting could be used to create Slab layout drawing with rebar shown in the element. 
  • Assembly name contains "SLAB" is filtered to show in this drawing. 
  • Neighbour part filter is used and object level settings to hide part mark for column and call assembly position number for beams are used. 
Image
d3.JPG
 
CIP_Pour_Plan.gd (Concrete folder) 
  • This setting could be used to create Pour plan for selected view in model. 
  • Each pour upto Pour Number 10 will be represented with different colour using object level settings. 
  • Further conditions could be added at object level settings for different pour numbers greater than 10. 
  • Pour Number, Volume and Pour Date are shown in the marks 
Image
D2.JPG

CIP_Pour_3D.gd (Concrete folder) 

  • This setting could be used to create 3D Pour for selected view in model. 
  • The view shows different pours in different colours
  • It uses PourList.tpl to list pour information and PourColours.tpl to indicate pour colour displayed in the view. ​​​​
Image
d1.JPG

PC-A1-PlanElevs.gd (Precast folder) 

  • Creates Plan or Elevation view with all members visible. 
  • Rebar is turned off and no filter or object level settings are used
Image
d8.JPG


PC-A1-FoundPlan.gd (Precast folder) 
  • Creates Plan view with all members visible. 
  • Rebar is turned off and no filter or object level settings are used
  • Part mark "Cast Unit position number" and "Profile" called for other main parts. 
Image
d9.JPG


PC-A1-FloorPlan.gd (Precast folder) 
  • Creates Plan view with all members visible. 
  • Rebar is turned off and no filter or object level settings are used
  • Part mark "Cast Unit position number" and "Profile" called for other main parts. 
Image
d10.JPG


PC-A1-3D.gd (Precast folder) 
  • Creates 3D view with fill. 
  • Rebar is turned off and no filter or object level settings are used
Image
d11.JPG


Engineering_A1_Pile_Layout.gd (Engineering folder) 
  • Creates a basic Pile layout drawing. 
Image
1.PNG
 
Image
2.PNG


Engineering_A1_Foundation_Plan.gd (Engineering folder) 
  • Creates a basic Foundation layout drawing. 
Image
3.PNG


Engineering_A1_Floor_Plan.gd (Engineering folder) 
  • Creates a basic Floor layout drawing. 
Image
4.PNG


Engineering_A1_Elevations.gd (Engineering folder) 
  • Creates a basic Floor layout drawing. 
Image
5.PNG

2.2 Cast Unit Drawing Properties

2.2.1 CIP drawing settings (Rebar Detailing Role)

CIP_Pad_Footing
  • Creates Top view and section view of Pad footings with Reinforcement

  • RC-Rebar-Pullout-Schedule.tpl is used in the layout

 

Image
c1.JPG

 CIP_Strip_footing
  • Creates Top view and section view of Strip footings with Reinforcement 
  • RC-Rebar-Pullout-Schedule.tpl is used in the layout
Image
c2.JPG


CIP_Beam
  • Creates Front view and section view(s) with Reinforcement of the cast unit (Concrete Beam) 
  • RC-Rebar-Pullout-Schedule.tpl is used in the layout

 

Image
c3.JPG

 CIP_Column
  • Creates Front view and section view(s) with Reinforcement of the cast unit (Concrete Column) 
  • RC-Rebar-Pullout-Schedule.tpl is used in the layout

 

Image
c4.JPG

 CIP_Slab
  • Creates Top view and section view(s) with Reinforcement of the cast unit (Concrete Slab) 
  • RC-Rebar-Pullout-Schedule.tpl is used in the layout

 

Image
c5.JPG


CIP_Panel
  • Creates Front view and section view(s) with Reinforcement of the cast unit (Concrete Wallpanel) 
  • RC-Rebar-Pullout-Schedule.tpl is used in the layout

 

Image
c6.JPG


CIP_Spiral_Beam
  • Creates Plan view and Side view with Reinforcement of the cast unit (Concrete Spiral Beam) 
  • RC-Rebar-Pullout-Schedule.tpl is used in the layout
Image
c7.JPG

2.2.2 Precast drawing settings (Precast Detailer Role)

PC-Wall
  • Creates Front View for Mould and Rebar, section view and 3D view of the cast unit. 
  • ​​​​Uses PC_ELEMENT_INFO.tpl, PC_MESH.tpl, PC_MESH_WEIGHT.tpl, PC_REBAR.tpl and PC_MISC ITEMS.tpl tables in the layout

 

Image
pr1.JPG


PC-Slab
  • Creates Front View for Rebar, section view and 3D view of the cast unit. 
  • ​​​​Uses PC_ELEMENT_INFO.tpl, PC_MESH.tpl, PC_MESH_WEIGHT.tpl, PC_REBAR.tpl and PC_MISC ITEMS.tpl tables in the layout
Image
pd2.JPG


PC-hollowcore
  • Creates Front View, top view, section view and 3D view of the Hollowcore unit. 
  • ​​​​Uses PC_ELEMENT_INFO.tpl, PC_MESH.tpl, PC_MESH_WEIGHT.tpl, PC_REBAR.tpl and PC_MISC ITEMS.tpl tables in the layout
Image
pd3.JPG


PC-Column
  • Creates Front View, top view and 3D view with Rebar of the Precast Column
  • ​​​​Uses PC_ELEMENT_INFO.tpl, PC_MESH.tpl, PC_MESH_WEIGHT.tpl, PC_REBAR.tpl and PC_MISC ITEMS.tpl tables in the layout
Image
pd3.JPG


PC-beam
  • Creates Front View, top view and 3D view with Rebar of the Precast Column
  • ​​​​Uses PC_ELEMENT_INFO.tpl, PC_MESH.tpl, PC_MESH_WEIGHT.tpl, PC_REBAR.tpl and PC_MISC ITEMS.tpl tables in the layout
Image
pd5.JPG


PC-standard
  • Creates Front View, top view and 3D view with Rebar of the Precast Column with View properties PC-standard
  • ​​​​Uses PC_ELEMENT_INFO.tpl, PC_MESH.tpl, PC_MESH_WEIGHT.tpl, PC_REBAR.tpl and PC_MISC ITEMS.tpl tables in the layout
Image
pd6.JPG
 

2.3 View Properties

View Properties Scale Filters  Part/ Pour Rebar Part Mark Rebar Mark Object Level Settings Grid Dimension settings Neighbour Part Folder
cu_3D_view.vi 1:30           General
CIP_standard_sec.vi 1:20       General
CIP_standard.vi 1:20       General
RC_plan.vi 1:50         General
standard_section_View.vi 1:20       General
standard.vi 1:20       General
single_3D_view.vi 1:20         General
Single_section.vi 1:50             General
PLAN.vi 1:50             General
RC-FOUNDATION.vi 1:50             Concrete
RC-Cast-Unit-Mesh-Wall.vi 1:20           Concrete
RC-Cast-Unit-Foundation.vi 1:20           Concrete
RC-Bending-Schedule.vi 1:75                 Concrete
CIP_Strip_footing_2.vi 1:15         Concrete
CIP_Strip_footing.vi 1:25         Concrete
CIP_Spiral_Beam.vi 1:20           Concrete
CIP_Slab_2.vi 1:50       Concrete
CIP_Slab.vi 1:50     Concrete
CIP_Pour_Plan.vi 1:100         Concrete
CIP_Pour_3D.vi 1:100           Concrete
CIP_Panel_2.vi 1:25       Concrete
CIP_Panel.vi 1:25     Concrete
CIP_Pad_Sec.vi 1:20         Concrete
CIP_Pad_New.vi 1:20         Concrete
CIP_Pad_New-sec.vi 1:20         Concrete
CIP_Pad_Footing.vi 1:20           Concrete
CIP_Column.vi 1:15       Concrete
CIP_Column_2.vi 1:15       Concrete
CIP_Beam_3.vi 1:10       Concrete
CIP_Beam.vi 1:15       Concrete
CIP_Beam-3.vi 1:15         Concrete
CIP-Standard.vi 1:15         Concrete
PC-wall_3.vi 1:25         Precast
PC-wall_2.vi 1:25         Precast
PC-wall.vi 1:25         Precast
PC-Standard_3.vi 1:25         Precast
PC-Standard_2.vi 1:25         Precast
PC-Standard.vi 1:25         Precast
PC-slab_3.vi 1:25         Precast
PC-slab_2.vi 1:25         Precast
PC-slab.vi 1:25         Precast
PC-section.vi 1:20           Precast
PC-hollowcore_3.vi 1:25         Precast
PC-hollowcore_2.vi 1:25       ✔    Precast
PC-hollowcore.vi 1:25         Precast
PC-hollowcore-Top.vi 1:25         Precast
PC-hollowcore-Front.vi 1:25         Precast
PC-Hardware_3.vi 1:25         Precast
PC-Hardware_2.vi 1:25         Precast
PC-Hardware.vi 1:10         Precast
PC-column_3.vi 1:25         Precast
PC-column_2.vi 1:25         Precast
PC-column.vi 1:25         Precast
PC-beam_3.vi 1:25         Precast
PC-beam_2.vi 1:25         Precast
PC-beam.vi 1:25         Precast
PC-barcode_2.vi 1:10             Precast
PC-barcode.vi 1:100             Precast
CU_section_Reinforcement.vi 1:30         Precast
CU_section_formwork.vi 1:30         Precast
CU_section.vi 1:30         Precast
CU_Front_Reinforcement_w_mesh.vi 1:30             Precast
CU_Front_Reinforcement.vi 1:30           Precast
CU_Front_formwork.vi 1:30           Precast

✔ - Content available 
(bold) - Different content available compared to another view property with similar name
 - Content available but greyed out with no colour 
Image
no color.JPG

2.4 Drawing Filters

The filters included in the below list are with any of the following extensions *.gdf, *.gdnf, *.wdf, *.wdnf, *.adf, *.adnf, *.cuf, *.vnf & *.dsf
Sl. No Filter Name You can Filter  Folder
1 3-CIP_filter Objects with MATERIAL_TYPE=CONCRETE and Assembly Type =1 General
2 3-Concrete_filter Objects with MATERIAL_TYPE=CONCRETE and Object Type =ASSEMBLY General
3 4D_pour_completed PLANNED_END_POUR for pour unit = Review date General
4 4D_pour_completed_Actual ACTUAL_END_POUR for pour unit = Review date General
5 4D_pour_in_progress
Image
6.PNG
General
6 3-Precast_filter
Image
7.PNG
General
7 Bottom bars Reinforcements with NAME = B* (starting with B)  Concrete
8 CIP_Beam Cast unit Name = BEAM, Assembly Type = 1 Concrete
9 CIP_Beam_Column Cast unit Name = COLUMN or BEAM, Assembly Type = 1 Concrete
10 CIP_Column Cast unit Name = COLUMN, Assembly Type = 1 Concrete
11 CIP_Footings Cast unit Name = FOOTING or *FOOTING* Assembly Type = 1 Concrete
12 CIP_Pedestal Cast unit Name = PEDESTAL, Assembly Type = 1 Concrete
13 CIP_Pile Cast unit Name = PILE, Assembly Type = 1 Concrete
14 CIP_Slab Cast unit Name = *SLAB*, Assembly Type = 1 Concrete
15 CIP_Strip_footing Cast unit Name = STRIP_FOOTING, Assembly Type = 1 Concrete
16 CIP_Wall Cast unit Name = *WALL* or *PANEL*, Assembly Type = 1 Concrete
17 cip-stirrup Reinforcing bar NAME = STIRRUPS or STIRRUP Concrete
18 extra-bot Object Type = Reinforcing bar & Reinforcing bar NAME = EXTRA_BOT or ADD_BOT Concrete
19 extra-top Object Type = Reinforcing bar & Reinforcing bar NAME = EXTRA_TOP or ADD_TOP Concrete
20 INT_SH_48 Reinforcing bar SHAPE = 57 & SHAPE_INTERNAL = 48 Concrete
21 Pour number 0, 1, 2, 3 ..... 9 Object type = Pour object & Pout number = 0, 1, 2, 3 .... 9   Concrete
22 Pour number x0 Object type = Pour object, Pour number does not begins with 0 and ends with 0 Concrete
*Some filters which are common for model and drawing are listed in 1.1 Filters

2.5 Dimension Settings

The extension of below listed files is *.dim 
Sl. No Dimension Settings Example Folder
1 tagged_dimension_mark (Rebar)
Image
8.png
General
2 Create-Dim-Line (Rebar)
Image
9.png
General
3 rebar_tagged_dimension_mark (Rebar)
Image
10.png
General
4 rebar_dimension_mark (Rebar)
Image
11.png
General
5 cu_dimension (Cast Unit)
Image
12.PNG
Concrete
6 dimension_mark (Rebar)
Image
13.png
Concrete
7 cu_check_dimension (Cast Unit)
Image
14.PNG
General
8 cu_angle_dimension (Cast Unit)
Image
15.PNG
Concrete
9 PC-wall, PC-wall_2, PC-wall_3
Image
16.PNG
Precast
10 PC-Standard, PC-Standard_2, PC-Standard_3
Image
17.PNG
Precast
11 PC-slab, PC-slab_2, PC-slab_3
Image
16.PNG
Precast
12 PC-Range-right
Image
19.png
Precast
13 PC-Range-left
Image
18.png
Precast
14 PC-hollowcore, PC-hollowcore_2,
PC-hollowcore_3
Image
15.PNG
Precast
15 PC-Hardware, PC-Hardware_2, PC-Hardware_3
Image
14.PNG
Precast
16 PC-column, PC-column_2, PC-column_3
Image
16.PNG
Precast
17 PC-beam, PC-beam_2, PC-beam_3
Image
17.PNG
Precast
18 PC-barcode, PC-barcode_2, PC-barcode_3
Image
20.png
Precast






















































































































 

2.6 Dimension Settings in View Properties:

cip-stirrups.viewdim (Concrete folder): It creates integrated dimension for Current Assembly using settings "CIP_Beam"

cu_formwork.viewdim (Precast folder): 
  • It creates Filtered dimension with settings "Liftingloop"
  • It creates Filtered dimension with settings "all_embeds"
  • It creates recess dimension with settings "recess"
  • It creates hole dimension with settings "holes"
  • It creates shape dimension with settings "shape"
  • It creates overall dimension with setting "Overall"

Dimension Rule Settings

Filter Dimension Rules: 
  • Liftingloop.FilterDimXml: It creates dimension for Filter settings "DF_precast_liftinghooks" on all 4 sides of Cast Unit using "standard" dimension settings. 
  • all_embeds.FilterDimXml: It creates dimension for Filter settings "DF_precast_EB_wo_lifting" on all 4 sides of Cast Unit.
  • standard.FilterDimXml: It creates dimension for Filter settings "DF_precast_liftinghooks" on top of the Cast Unit. 
Shape Dimension Rules:
  • shape-hollow.ShapeDimXml
  • PC_shape.ShapeDimXml
  • shape-hollow.ShapeDimXml
  • HS_Shape.ShapeDimXml
  • DW_Shape_Right.ShapeDimXml
  • DW_Shape_Left.ShapeDimXml
  • DW_Shape_bottom.ShapeDimXml
  • DW_Shape.ShapeDimXml
Overall Dimension Rules:
  • PC_Overall.OverallDimXml
  • cip-beam-sec-overall.OverallDimXml
  • cip-beam-Overall.OverallDimXml
  • HS_Overall.OverallDimXml
  • DW_Overall_turned_left_shell2.OverallDimXml
  • DW_Overall_turned_left.OverallDimXml
  • DW_Overall_Shell1.OverallDimXml
  • DW_Overall_Right.OverallDimXml
  • DW_Overall.OverallDimXml
  • DW_Elevation_Right.OverallDimXml

2.7 Object Level Settings

CIP.vclassif - Concrete folder
 
Image
ob1.JPG
 

CIP_Pour.vclassif -
Concrete folder
 
Image
ob2.JPG


CIP_Pour_3D.vclassif - Concrete Folder
Image
ob3.JPG

2.8 Template (.tpl) files

Sl.no Template Name and Folder Example
1 rebar_schedule.tpl - General folder
Image
1.JPG
2 Pour_object_mark.tpl - General folder
Image
8.png
3 Pour_break_mark.tpl - General folder
Image
9.png
4 EmbedMark.tpl - General folder
Image
4.png
5 CastUnitMark.tpl - General folder
Image
5.png
6 Rebar_summary_heading.tpl & Rebar_summary.tpl - Concrete folder
Image
6.png
7 IS_BBS.tpl - Concrete folder
Image
7.PNG
8 SLAB.tpl - Concrete folder
Condition: Part Name = SLAB
Rebar Name = T1, T2, B1, B2
Image
22.PNG
9 Rebar-BB-Schedule.tpl- Concrete folder
Image
10.png
10 RC-Rebar-Pull-Out-Schedule.tpl- Concrete folder
Image
11.png
11 RC-GA-TYPE 2-A1-TITLE.tpl- Concrete folder
Image
12.PNG
12 RC-GA-A1-TITLE.tpl- Concrete folder
Image
13.PNG
13 RC-GA-A1-GEN-NOTES.tpl- Concrete folder
Image
14.PNG
14 RC-DO-NOT-SCALE.tpl- Concrete folder
Image
15.PNG
15 PourList.tpl- Concrete folder
Image
23.png
16 PourColors.tpl- Concrete folder
Image
24.PNG
17 Footing schedule.tpl- Concrete folder
Condition: Part Name = FOOTING
Rebar Name = T1, T2, B1, B2
Image
16.PNG
18 drawing_title_cu.tpl- Concrete folder
Image
17.PNG
19 cast_unit_rebar_list_ENG.tpl- Concrete folder
Image
18.PNG
20 cast_unit_rebar_graphs.tpl- Concrete folder
Image
19.PNG
21 cast_unit_part_list.tpl- Concrete folder
Image
20.PNG
22 cast_unit_list.tpl- Concrete folder
Image
21.PNG
23 PC_REBAR.tpl - Precast folder
Image
33.png
24 PC_PhaseQty.tpl- Precast folder
Image
25.PNG
25 PC_MISC ITEMS.tpl- Precast folder
Image
26.PNG
26 PC_MESH_WEIGHT.tpl- Precast folder
Image
27.PNG
27 PC_MESH.tpl- Precast folder
Image
28.PNG
28 PC_ELEMENT_INFO.tpl- Precast folder
Image
29.PNG
29 PC-hardware-Assembly.tpl- Precast folder
Image
30.PNG
30 PC-GA-revision.tpl- Precast folder
Image
31.PNG
31 PC-A3-TITLE.tpl- Precast folder
Image
32.png
32 ENG_ground_beam.tpl - Engineering folder
Image
21.PNG
33 ENG_found_notes.tpl - Engineering folder
Image
22.PNG
34 ENG_footing_schedule.tpl - Engineering folder
Image
25.png
35 ENG_drg_title_ga.tpl - Engineering folder
Image
23.PNG
36 ENG_drg_rev_notes.tpl - Engineering folder
Image
24.PNG
37 ENG_drg_rev_a1.tpl - Engineering folder
Image
26.PNG
38 drawing_title_cu.tpl - General folder
Image
30.PNG
39 drawing_title_ga.tpl - General folder
Image
29.PNG
40 Notes.tpl - General folder
Image
32.PNG
41 Reference Drawing table.tpl - General folder
Image
33.png
42 revision.tpl - General folder
Image
28.PNG
43 ts-revision.tpl - General folder
Image
27.PNG
44 phase_template.tpl - General folder
Image
31.PNG











 

 

 

Go to Top 

2.9 Symbol files

Dia.sym - General folder

 
Image
34.PNG


Bent.Sym - General folder
 
Image
35.PNG


Grids.sym - General folder
Image
36.PNG

2.10 Export / Print Settings

Export Settings
  • Precast_DWG_ModelSpace.dwgsetting
  • CastUnit_DWG_ModelSpace.dwgsetting
  • Precast_DWG_LocalSpace.dwgsetting
  • Precast_DXF.dwgsetting
  • CastUnit_DXF.dwgsetting
  • CastUnit_DWG_PaperSpace.dwgsetting
Print Settings
  • A1-PDF.PdfPrintOptions.xml
  • A2-PDF.PdfPrintOptions.xml
  • A3-PDF.PdfPrintOptions.xml
  • A4-PDF.PdfPrintOptions.xml
  • A1-Bw-Pdf.PdfPrintOptions.xml
  • A3-Bw-Print.PdfPrintOptions.xml
 
 

Model Templates 

3.1 4D Concrete Model

  • This model template contains 4D data for Erection and Fabrication Status, Pour in Progress, etc.
  • It contains to run or check all available Filters, Reports, Settings, etc. in India Environment which are listed in this article.
  • Please check the help page HERE for more information.
Image
mt4.JPG


3.2 IS 2502 Rebar Shapes
  • This model template contains Rebar shapes as per IS 2502 code book. 
  • Please check the help page HERE for more information.
Image
mt2.PNG


3.3 Precast Model Template
  • This model template contains attributes and settings suitable for Indian Precast Project.
  • Please check the help page HERE or the help video by clicking this LINK for more information.
Image
mt3.PNG
Czy to było pomocne?