Engineering library update - November 2022
Tekla Tedds engineering library update (November 2022 - version 24.08) is available in Tekla Downloads.
American Design
RC beam torsion design (ACI318)
New calculation which calculates the quantity of torsional reinforcement required, if any, for a solid rectangular section subjected to a combination of direct shear force and torsional moment. In accordance with ACI318-19, ACI318-14 and ACI318-11.
Video demonstration
Other Updates
| Batch design | |
|---|---|
| Enhanced to include an example for "RC beam torsion design (ACI318)". | |
| Column base plate design (AISC360) | |
|---|---|
| TEDDS-6686 | Superseded note regarding anchor placement removed from calculation notes. |
|
RC 2D analysis & design (ACI318) RC beam analysis & design (ACI318) RC beam design (ACI318) |
|
|---|---|
| TEDDS-6696 | Fixed output statement for shear check when the required reinforcement is equal to the minimum required. |
| RC column design (ACI318) | |
|---|---|
| TEDDS-6784 | Enhanced to separate spiral reinforcement pitch and volumetric ratio checks and moved tie check to be included in all output. |
| TEDDS-7160 | Corrected output of axial r factor for spirally reinforced columns in summary output. |
| RC wall design (ACI318) | |
|---|---|
| TEDDS-6575 | Improved list options for effective length factor. |
| TEDDS-6099 | Removed unnecessary slenderness limit or 100 from ACI code versions after 2005. |
| Tilt-up wall panel design (ACI318) | |
|---|---|
| TEDDS-5840 | Corrected minimum reinforcement equation to use depth of reinforcement instead of wall thickness. |
Australian Design
| RC slab design (AS3600) | |
|---|---|
| TEDDS-7201 | Fixed undefined variable error Fd when selecting direct input of forces is selected. |
| TEDDS-7202 | Fixed error where the value for shear could not be changed when selecting the direct input of forces method. |
British Design
No updates.
Canadian Design
No updates.
Eurocode Design
| Crane gantry girder design (EN1993) | |
|---|---|
| TEDDS-7157 | Fixed an undefined variable error for a four wheel end carriage when inputting the wheel loading to calculate the forces. |
| Foundation analysis & design (EN1992/EN1997) | |
|---|---|
| TEDDS-5893 | Revised calculation notes to clarify assumptions for favourable and unfavourable actions. |
| RC raft foundation (EN1992) | |
|---|---|
| TEDDS-7284 | Fixed undefined variable error when selecting summary output |
|
Steel 2D analysis & design (EN1993) Steel member design (EN1993) Steel member analysis & design (EN1993) |
|
|---|---|
| TEDDS-6857 | Enabled effective length factors for hollow section types. |