2022 SP7: Ważne ulepszenia i poprawki

Tekla Structures
2022
Tekla Structures

2022 SP7: Ważne ulepszenia i poprawki

Najnowszy Tekla Structures dodatek Service Pack i zaktualizowane instalatory środowiska są dostępne w Tekla Downloads.

Eksport IFC4 – Nowa opcja wyboru odpowiedniego systemu eksportu punktu bazowego

Teraz możesz wybrać system, który ma być zastosowany, gdy eksportujesz do standardu IFC4, a położenie jest oparte na punkcie bazowym. Po zdefiniowaniu punktu bazowego dla opcji Położenie według w oknie dialogowym Eksport IFC4 wyświetlone zostanie nowe ustawienie, Eksport punktu bazowego, w celu zapewnienia prawidłowej współpracy z innymi podmiotami w projekcie. Dostępne opcje to IfcMapConversion i Układ współrzędnych IfcSite.

IfcMapConversion konwertuje lokalny układ współrzędnych modelu na globalny układ współrzędnych i jest potrzebny, gdy wymagany jest format IFC4 zgodny ze schematem IFC4.

Układ współrzędnych IfcSite konwertuje współrzędne w modelu IFC dla każdego obiektu oddzielnie i można go użyć do utworzenia pliku IFC4, który można wyświetlić w większości przeglądarek IFC, w tym w Trimble Connect. Ta sama metoda konwersji jest używana również podczas eksportu IFC2x3.

TTSD-53708

Udoskonalone udostępnianie wersji rysunku w Tekla Model Sharing

Wcześniej udostępnianie wersji rysunku w Tekla Model Sharing nie działało zgodnie z oczekiwaniami i wersje rysunku ulegały utraceniu po wysłaniu. Teraz wersje rysunku nie są usuwane podczas wysyłania. Ponadto usuwanie zbędnych plików rysunku można kontrolować za pomocą opcji zaawansowanych.

Kontrolowanie, czy zbędne pliki rysunku są usuwane, działa teraz tak samo jak w przypadku modeli wielu użytkowników. Użyj opcji zaawansowanych XS_DELETE_UNNECESSARY_DG_FILES, aby zdefiniować, czy zbędne pliki rysunku mają zostać usunięte, a także XS_​DELETE_​UNNECESSARY_​DG_​FILES_​SAFETY_​PERIOD, aby określić czas, po którym mają być usuwane.

Jeśli ustawisz opcję XS_DELETE_UNNECESSARY_DG_FILES na TRUE, pliki .dg starsze niż 7 dni, czyli po upłynięciu domyślnego okresu bezpieczeństwa, zostaną usunięte z lokalnego modelu użytkownika oraz innych użytkowników w tym samym modelu. Opcja zaawansowana XS_DELETE_UNNECESSARY_DG_FILES_SAFETY_PERIOD pozwala określić, na jak długo mają być zapisywane pliki rysunku. Domyślny okres ochrony wynosi 7 dni.

TTSD-38119

Poprawki

Numer defektu Obszar rozwoju Opis
TSAC-4203 Concrete components

Braced girder (88): Previously, the braced girder was not split and it did not continue when it reached the recesses. This issue has now been fixed.

TSAC-5960 Concrete components

Concrete console (110): The polygon cut to cut the column is now created properly with sloped beams.

TSAC-6127 Concrete components

Concrete console (110): Previously, the hole position was not correct in the neoprene when it was placed under a sloped beam. This issue has now been fixed.
 

TSAC-6628 Concrete components

Corbels and recesses (82): Recess positioning for cut parts has been improved.

TSAC-7007 Concrete components

Braced girder (88): Previously, girders were not created correctly if there was a cutout or a partial cutout on one or both of the side edges of the main part. This issue has now been fixed.
 

TSAC-7031 Concrete components

Rebar coupler and anchor tools: The Extra fabrication length values are now written to the correct user-defined attributes.

TSAC-7035 Concrete components

Electric box in wall (84): Sometimes, when you changed the connection used between the electric parts and the panel, the result assembly of the parts was broken. This issue has now been fixed.
 

TSAC-7039 Concrete components

Concrete foundation (1030): The height level of the inner tube rebar is now properly defined.

TSAC-7176 Concrete components

Embedded anchors (008): Numbering now works properly for the extra insulation part.

TSAC-7299 Concrete components

Lifting anchor (80): Previously, lifting anchors were not created properly when created on an inconsistent assembly. This issue has now been fixed.

TSAC-7352 Concrete components

Wall to wall connection: Connectors are now placed correctly.

TTSD-55092 Concrete components

Embedded anchors (008): Earlier, when using a component for creating anchors in the Embedded anchors (008) component, there could be an application error in Tekla Structures. This issue has now been fixed.

TSAC-5988 Steel components

Haunch (40): Main part stiffeners are now created correctly when the column profile has flange slope ratio.

TSAC-6115 Steel components

Stiffened end plate (27): The default value of the front plate height is now the same as the end plate height in the column to beam connections.

TSAC-6294 Steel components

Railings (S77): Previously, only 99 vertical rails were welded to the main part. This issue has now been fixed and all rails are welded correctly to the main part.

TSAC-6306 Steel components

Stiffeners (1003), Multiple stiffeners (1064): Previously, weld preparations were always created. This issue has now been fixed.

TSAC-6308 Steel components

Seating cap plate (2): Previously, the horizontal offset of the lower cap plate was not correctly applied. This issue has now been fixed.

TSAC-6637 Steel components

Clip angle (141): Previously, the vertical bolt edge distance was not correctly applied in some cases. This issue has now been fixed.
 

TSAC-6806 Steel components

Column with stiffeners W (182): Previously, the strip to the secondary part flange did not work when the secondary part was connected to the main part web. This issue has now been fixed.

TSAC-6955 Steel components

UltraZED File transfer (93): Previously, manually adjusting the length of a diagonal restraint after they had been inserted with a component resulted in incorrect CAM data as it would not update. Now, the Tekla Structures displays a warning message, and requests drawings.

TSAC-7001 Steel components

Ayrshire Diagonal tie - column (81), Ayrshire File transfer (92): Previously, there was an application error when connecting the diagonal brace to a column or rafter. This issue has now been fixed.

TSAC-7017 Steel components

The Auto bolt component used in custom components now supports the following data types for the BoltSize attribute: bolt size, length, double, and string. The component can also be modified while being a part of custom component, in the user interface, without any unexpected results. The stand-alone Auto bolt component works the same way as previously.

TSAC-7030 Steel components

Steadmans Mezzanine inset cleat (121) is a new inset cleat connection for the mezzanine floor range of beams.

TSAC-7093 Steel components

CMF Side rail supports (28): Previously, when using CMF Non-continuous rail (106) to attach rails in between the column webs, if the cut back of the cold rolled was too great, CMF Side rail supports (28) was not applied. This issue has now been fixed.

TSAC-7118 Steel components

Tensioner (7): Previously, the component did not work correctly for one secondary part. This issue has now been fixed.
 

TSAC-7123 Steel components

Ayrshire Eaves beam to stanchion (113): The Welds tab for this component has been removed.

TSAC-7148 Steel components

Two sided clip angle (143): Previously, the vertical position of bolts was affected by the notch cuts in the secondary parts. This issue has now been fixed.

TSAC-7154 Steel components

BW Mezzanine floor connection (39): Previously, the default profile used was incorrect, and the cleat thickness option did not work. These issues have now been fixed.

TSAC-7201 Steel components

Shear plate simple (35): Previously, the assembly position and start number were incorrectly applied for the shear tab. This issue has now been fixed.

TSAC-7220 Steel components

Seating (39): Previously, only one pair of stiffeners was created for some of the main part profiles. This issue has been fixed, and two pairs of stiffeners are now created.

TSAC-7223 Steel components

Joining plates (14): Previously, when the angle between the main and secondary part was small, the component did not work correctly. This issue has now been fixed.

TSAC-7236 Steel components

Clip angle (141): Previously, the vertical position of bolts was affected by the notch cuts in the secondary part. This issue has now been fixed.

TSAC-7240 Steel components

Stiffened end plate (27): On the Parts tab, you can now select whether the front plate is moved in column to beam connections.

TSAC-7303 Steel components

U.S. Base plate (1047): Previously, the cuts to create finger shim plates were not positioned correctly. This issue has now been fixed.

TTSD-8330 Organizer

Organizer object group (.OrgObjGrp) files can now be read from the subfolders of firm or project folders in the Organizer category properties dialog box.

TTSD-54476 Import, export, interoperability

IFC2x3 export: Due to some invalid fittings, the IFC2x3 export behaved incorrectly when trying to apply these fittings in a certain base point use case. Now invalid fittings are ignored in the IFC2x3 export.

TTSD-54901 Import, export, interoperability

Import from Tekla Structural Designer: Concrete grade 2500 psi is now included in the Tekla Structural Designer import material mapping. It is imported with the warning "Materials were auto-created: 2500 Concrete".

TTSD-54937 Import, export, interoperability

Where Tekla Structures 2022 SP6 and Tekla Structural Designer 2022 (any service pack) were installed on the same computer and the direct link was used for importing or exporting, the import or export process failed.
This issue has now been fixed in this service pack for Tekla Structures. There is no need to install a different service pack for Tekla Structural Designer 2022.

TTSD-55036 Import, export, interoperability

Point clouds: The point cloud location was not modified and saved correctly in a specific use case, which has now been fixed.

TTSD-55089 Import, export, interoperability

The following missing IFC entities have been added in the IFC entity list and in the IFC4 and IFC2x3 export:
IfcBeam (added for assemblies, cast units, and pour units)
IfcChimney (added for assemblies, cast units, and pour units)
IfcColumn (added for assemblies, cast units, and pour units)
IfcFooting (added for assemblies, cast units, and pour units)
IfcMember (added for assemblies and cast units)
IfcPile (added for assemblies, cast units, and pour units)
IfcPlate (added for assemblies and cast units)

TTSD-55101 Import, export, interoperability

IFC4 export: Boolean type (TRUE/FALSE) of user-defined attributes are now exported correctly.

TTSD-55134 Import, export, interoperability

IFC4 export: With the Export flat wide beams as plates setting, plates were sometimes exported to wrong location. This issue has now been fixed.

TTSD-55474 Import, export, interoperability

The IFC4 API in 2022 was changed in 2022 SP6 (IFCExportFlags), which needed a rebuild of the external applications executing the IFC4 export. This change is now reverted so that the external applications work again without the need of a rebuild.

TTSD-55485 Import, export, interoperability

IFC object conversion: The conversion results are now better with certain IFC models containing nested IFC boolean results (adds or cuts).

TTSD-55855 Import, export, interoperability

Trimble Connect: Property sets for rebar sets were previously not exported to Trimble Connect when you used the Upload model command. This issue has now been fixed.

TPLED-269 Templates and reports

Template Editor: When you panned the template work area with the mouse, the selection handles were drawn with the background color and the handles were invisible. This issue has now been fixed.

TSAC-7266 Templates and reports

CUSTOM.HC_SAWINGS_END_N now returns the correct number of individual sawing lines for the end cuts at every angle.

TTSD-52195 Templates and reports

Tekla Structures stopped responding when a template tried to output a single row that was defined to use columns that started from bottom left or bottom right. This issue has now been fixed.

TSAC-6979 Drawings

View-specific dimensioning: The drawing dimensioning method Filter did not work correctly in skewed cases when dimensioning custom components as secondary objects. This issue has now been fixed.

TSAC-7175 Drawings

View-specific dimensioning: When the dimensioning method Filter was used for skewed edges and the cast unit consisted of several parts, the dimension start and end points were not always placed correctly. This issue has now been fixed.

TSAC-7229 Drawings

View-specific dimensioning: The Filter dimensioning option Only objects on the selected sides did not work when the secondary parts contained cuts, and the filter did not contain an Object type row. This issue has now been fixed.

TSAC-7242 Drawings

Drawing dimensioning now works in a rebar assembly that is added to a hierarchical cast unit, for example, to a double wall. Previously, no dimensions were created.

TSAC-7264 Drawings

View-specific dimensioning: The dimensioning method Filter with the rule option Only objects on the selected sides did not work for bolt groups. This issue has now been fixed.

TTSD-51835 Drawings

Fabrication drawings: The Creation review dialog box now remembers the states of the check boxes better.

TTSD-51846 Drawings

Fabrication drawings: The Creation review dialog box now handles the existing drawings more reliably.

TTSD-52695 Drawings

Fabrication drawings: The Creation review dialog sometimes showed the same drawing settings twice. This issue has now been fixed.

TTSD-53541 Drawings

Adding an associative note for the selected part did not work correctly if you picked the leader line positions outside the drawing view. This issue has now been fixed.

TTSD-53989 Drawings

Drawing context menu: Now the context menu in drawing mode is updated and shown correctly when you click the model view while editing a drawing and then return back to the drawing. Earlier, the context menu was empty in this case.

TTSD-54698 Drawings

Earlier, in neighbor parts with bolt holes, circular holes could get a slotted hole mark. This issue has now been fixed.

TTSD-54819 Drawings

Earlier, when inserting or modifying marks with the advanced option XS_ENABLE_REBAR_MARK​_LEADER_​LINE_BASE_​​POINT​_OPTIMIZATION set to TRUE, the base point optimization was also done for other types of marks than rebar marks. This issue has now been fixed.  

TTSD-55047 Drawings

Print drawings using Printer Catalog printer instances (old printing): Printing in gray scale now works.

TTSD-55379 Drawings

Fabrication drawings: The Creation review dialog box was listing some setting files that were not drawing setting files. This issue has now been fixed.

TTSD-55693 Drawings

Fabrication drawings: Sorting by multiple columns now works in the Creation review dialog box.

TTSD-54388 Tekla Model Sharing

Now, in Tekla Model Sharing, drawing files are restored if the .dg files have been accidentally deleted. Deleted drawings are copied to the ModelSharing\BackUpEnv folder and are checked against to the drawings on the Drawing list. The .dg files are read automatically from the BackUpEnv folder when another user reads in the packet that has been written out after the drawing deletion.

TTSD-54524 Tekla Model Sharing

Previously, reading in the sharing changes was sometimes extremely slow if the model contained a large number of custom components that had been duplicated from plugin components with an identical name. A warning dialog box was shown, and you had to click the OK button multiple times on the dialog box to pass the warnings and being able to continue.

Now, the components are no longer automatically updated when you read in. This results in faster performance and fewer false modification conflicts, and no warnings are shown. 

TTSD-41794 Reinforcement

Rebar sets: The commands Create 3D view and Zoom now work properly with rebar set modifiers. The work area around the selected rebar set modifier is now defined correctly.

TTSD-54053 Reinforcement

Rebar sets: You can no longer use the By guidelines command with pour objects or add leg surfaces to existing rebar sets in pour views.

TTSD-54965 Reinforcement

Rebar sets: When Follow edges was set to Yes, bars were not created to all faces of a part if the part collided slightly with another part. Tekla Structures was not able to find suitable edges to follow in these cases. This issue has now been fixed.

TTSD-55058 Reinforcement

Rebar sets: If you switch the work plane from the global origin and then create rebar sets using the By guidelines command, the current work plane is now taken correctly into account and the rebar sets are placed correctly.

TTSD-55128 Reinforcement

Rebar sets: It was not possible to create a modifier or secondary guideline with more than two points in multi-point picking mode if Follow edges was set to Yes. This issue has now been fixed.

TTSD-54170 Modeling

Previously, if multiple parts were selected and one of the parts had a parametric profile, the profile was shown as invalid in the property pane. This now has been fixed.

TTSD-54331 Modeling

Previously, in some rare cases, when assemblies with and without bolt holes were compared, Tekla Structures might have stopped working unexpectedly. This has now been fixed.

TTSD-54716 Modeling

Previously, when modeling and then inquiring negative hole tolerances, the HOLE_TOLERANCE template attribute returned 0 instead of the actual value. This issue has now been fixed.

TTSD-55138 Modeling

Previously, if you tried to cut surface treatment by the part it was attached to, Tekla Structures might have unexpectedly stopped working. This issue has now been fixed.

TTSD-55192 Modeling

Earlier, when performing operations that required unfolding of lofted plates consisting of several close to parallel polygon sections, for example, inquiry or export to IFC4, there was an application error in Tekla Structures. This issue has now been fixed.

TTSD-55524 Modeling

When using Building hierarchy in the model, the Fit work area to selected parts context menu command now correctly zooms to parts when the selection is done with Ctrl+A.

TTSD-55926 Core

Previously, in some rare situations, Tekla Structures might have stopped working unexpectedly when pressing F1. This has now been fixed.

TTSD-55680 User interface

The ribbon menu commands for Create fabrication drawing are now correctly disabled if there is no model open.

TTSD-55218 Import, export, interoperability (steel)

NC/DSTV: Certain weld preparations were not created correctly for I beam flanges when the flange had cuts that made the ends non-rectangular. Now the weld preparations are created correctly in this case.

TSAC-7179 Import, export, interoperability (concrete)

Export ELiPLAN file (68): Now height is also exported for user-defined profiles.

TSAC-7290 Import, export, interoperability (concrete)

Export ELiPLAN file (68): Previously, the export of elements with complex geometry did not work correctly. This issue has now been fixed.

Czy to było pomocne?
Wstecz
Dalej