Slab deflection analysis sequence
The same basic process is followed irrespective of whether the current level (sub-model), a selected level, or all slabs in the model are analyzed.
In simple terms, events are considered in sequence.
For each event:
- An iterative cracked section analysis including long term effects determines the deflection at the end of the event.
- An additional analysis using the determined state of cracking along with short term cracked properties is undertaken to calculate the total instantaneous deflection associated with the event.
- The state of cracking is carried forward to the next event as the starting point.
Having run a Slab Deflection Analysis the following analysis results are then available to review for either the chosen level (sub-model) or the entire structure dependent upon your chosen analysis
- Deflections - Three deflection types are available: Total, Differential, and Instantaneous.
- Extent of Cracking - You can also review contours to display the extent of cracking at any load event.
- Relative Stiffness - You can also review the relative stiffness in a particular result direction for any specified event.
- Effective Reinforcement - You can also review the area of effective reinforcement for a chosen result direction for each FE element.