Shear only wall properties

Tekla Structural Designer
2021
Tekla Structural Designer

Shear only wall properties

General
Name The automatically generated name.
User Name Can be used to override the automatically generated name if required.
Top Level Specifies the top level for the wall.
Base Level Specifies the bottom level for the wall.
Wall Type Shear Only Wall
Note: Shear only walls must be rectangular in a vertical plane.
Material Type
Choice of:
  • Concrete
  • Timber
  • General
AutomaticGenerate Support

• Cleared - a support will only be created if the Generate support property is checked.

• Checked - a support will only be created if no members/slabs capable of providing support exist under the wall.

Generate support

• Cleared - no support is created under the wall.

• Checked - a support is created under the wall.

Note: When a support is created, a line support is formed under a meshed wall, a point support under a mid-pier wall, and a series of point supports under a bearing wall.
Note: When a support is created, its degrees of freedom are as specified in the ‘Wall support’ area of the wall properties.
Plane Indicates the grid along which the wall is placed.
All panels
Grade The grades available here are set from the Materials button on the Home ribbon.
Note: The grade is only required to specify the correct density to be used in the wall self weight calculation.
Thickness The thickness of the wall.
Note: The thickness is only required for the wall self weight calculation.
Alignment

Alignment of the wall:

  • Front
  • Back
  • Middle
  • User
Alignment offset When the alignment is set to User it can be adjusted by specifying an exact offset.
Spring stiffness The stiffness to be used in the analysis.

See: How shear only walls are represented in solver models

UDA

Name

Finish

Class

Phase

Note

File

A customizable list of the attributes that can be applied to individual members and panels.

See: Create and manage user-defined attributes

Czy to było pomocne?
Wstecz
Dalej