Design models

Tekla Structural Designer
2021
Tekla Structural Designer

Design models

Steel members, concrete members and walls

From the Design tab on the ribbon you can batch design all steel members, cast-in-place concrete members and walls. The necessary analysis is automatically performed as part of the batch design process. As an alternative to batch design, once analysis has been performed you might choose to selectively design parts of the model as required.

Concrete slabs

From the Design tab on the ribbon you can batch design all concrete slabs, slab patches and run all punching shear checks. From the same tab you can also check the response of floors to dynamic excitation. As an alternative to batch slab design, once analysis has been performed you might choose to selectively design or check selected slabs and slab patches as required.

Timber and precast members

From the Design tab on the ribbon you can batch check all timber and precast member designs where a linked Tedds calculation has been created. To find out more, see:

Steel connections

To find out about how to create and check various steel connection types, see: Create and check steel connections

Foundations

Foundation design is performed from the Foundations tab on the ribbon, see: Create and design foundations

Czy to było pomocne?
Wstecz
Dalej