Adjust and apply analysis settings

Tekla Structural Designer
2021
Tekla Structural Designer

Adjust and apply analysis settings

To adjust the analysis settings of the current project, or the default analysis settings for future projects, see the following instructions.

Adjust analysis settings in the current project

  1. On the Analyze tab, click Settings

    The Model Settings dialog box opens.

  2. Review and modify the analysis settings according to your needs.
  3. Do one of the following:
    • To apply the changes to the current project, click OK.
    • To save the changes to the selected settings set, click Save...
    • To revert to the analysis settings specified in the selected settings set, click Load...

Adjust analysis settings in future projects

  1. On the Home ribbon, click Settings.

    The Settings dialog box opens.

  2. Go to the Analysis Settings page.
  3. In the list at the top of the page, select the settings set that you want to modify.
  4. Review and modify the analysis settings according to your needs.
  5. To save the settings as defaults for future projects that use the selected settings set, click OK.
Czy to było pomocne?
Wstecz
Dalej