You can modify the properties of multiple drawings at one go with the Global Edit command.

1. Open project management job and click Drawing Log.
2. In the context menu, select the drawing log.

   The All Drawing Logs option opens a drawing log that lists all drawings that you have added. If you select the All Drawing Logs option, you can add drawings to any drawing log.

3. Click the Drawing Log ribbon tab.
4. On the menu, select Global Edit.

   The Global Edit Filters dialog opens.

5. To modify only specific types of items, select a filter type in the Type list, and click Select.

   The Filter dialog opens.

6. Do one of the following depending on the filter type:
   • Click the arrow buttons to move the items that you want to modify to the Included list.
   • Type the maximum and minimum values for the items that you want to modify.
7. Click OK.

   To further limit the drawing types that you want to modify, repeat steps 5 to 7 for all necessary filter types.

8. Click OK.

   The Global Edit dialog opens.

9. Select the properties that you want to update and modify as needed.

   You can also use Un-check All and Check Changed Fields to quickly clear or select checkboxes.

10. Click Update.

    The Confirm dialog opens.

11. To confirm changing the properties of multiple items, click Yes.