Adjust labor times for column splices

Tekla PowerFab
2022
Tekla PowerFab Tekla PowerFab GO

Adjust labor times for column splices

In Column Splices Maintenance, you can adjust the labor times for different times of column splices. These labor times will be used in all estimates by default. If necessary, create new column splice types or modify the existing ones.

To use column splices, you need to add them to labor codes. For more information, see Adjust labor codes.
  1. Click the Maintenance ribbon tab.
  2. On the menu, select Estimating > Labor Maintenance > Column Splices.
  3. In the Column Splices Maintenance dialog box, do any of the following:

    To

    Do this

    Create a new column splice type

    1. Click New.

    2. In the Type field, enter a letter indicator.

    3. Type a description and define the labor time in man hours.

    4. Click Add.

    Modify an existing column splice type

    1. Select a column splice type in the list.

    2. Modify the letter indicator, description, and labor time according to your needs.

    3. Click Edit to save the changes.

    Delete a column splice type

    1. Select a column splice type in the list.

    2. Click Delete.

    3. To permanently delete the column splice type, click Yes in the confirmation dialog box.
  4. To close the dialog box, click the Close button (X) in the upper-right corner.
Czy to było pomocne?
Wstecz
Dalej