Duggans Eaves Beam to Stanchion (EavesToColumn)

Tekla Structures
Not version-specific
Tekla Structures
Cold Rolled
Duggan Steel
duggans
eaves beam to stanchion
EavesToColumn
eaves to column
Environment
Not environment-specific

The Duggan Steel Eaves Beam to Stanchion connection will define a fixing bracket according to the set of parameters specified with either standard or non-standard stooling dimensions. The joint will define all bolts and welds required, and where appropriate will also fit the ends of the eaves beams to leave the correct end gap.

Before and after

Image
tekla-structures-duggans-eaves-to-stanchion-before.png
 
Image
tekla-structures-duggans-eaves-to-stanchion-after.png

Notes

  • Any modification of the selected parts will cause this joint to be updated.
  • When connection is applied the default connecting profile is always an appropriately sized DP-E-C-ANGLE, this can be overwritten in the Parts tab

Selection order example

  1. Column
  2. Eaves Beam
  3. Eaves Beam
  4. Click middle mouse button
Image
tekla-structures-duggans-eaves-to-stanchion-selection-order.png

See also

Duggans cold rolled - Important information
Duggans Eaves Beam to Stanchion - Parts tab
Duggans Eaves Beam to Stanchion - Parameters tab
Duggans Eaves Beam to Stanchion - Plate Dimensions tab
Duggans Eaves Beam to Stanchion - Bolts tab
Was this helpful?