Tekla Tedds Engineering Library (May 2019)

Tekla Tedds
Tekla Tedds for Word
2019
Tekla Tedds Tekla Tedds for Word
Environment
Australia
British Standard
Canada
Eurocode
USA
Materials
Masonry
Timber/Wood

Contents

UK and Asia

Updates

Retaining wall analysis & design (EN1992/EN1996/EN1997)

[TEDDS-847]1 - Corrected calculation of inclined load factor, ic, for undrained soils.
[TEDDS-3145]1 - Pass/fail sketch in interface corrected for masonry stem design.
[TEDDS-3157]1 - Amended UI to ensure partial factor, γc, retains correct value when the calculation is rerun.
[TEDDS-3332]1 - Corrected calculation of maximum friction force in output when net pressure is not selected.

Rolling load analysis

[TEDDS-3427]1 Enhanced to include the materials shear modulus in the analysis model.

Steel simple connection design (EN1993)

[TEDDS - 3351]1 Fixed to allow continental steel sections to be selected.

Timber 2D analysis & design (EN1995)
Timber member analysis & design (EN1995)

[TEDDS-3022]1 - Corrected calculation of the torsional moment of inertia, Itor.
Validation added to the input for section depth and breadth in member design calculation to ensure depth is never less than overall breadth of section.
[TEDDS-3246]1 - Corrected undefined variable error associated with outputting results to the summary table.

USA

Masonry column design (TMS/MSJC)

Enhanced design in accordance with TMS 402/602-16 and load combinations for IBC2018 and ASCE7-16.

Retaining wall analysis & design (ACI318/TMS/MSJC)

Enhanced design in accordance with TMS 402/602-16 and IBC2018.

Product bulletin May 2019 (PBT-1905-1)

[TEDDS-3392]1 Wood shear wall design (NDS)- Fixed a potentially un-conservative error affecting the design of perforated shear walls with wall segments with high aspect ratios. For more detailed information please refer to “Product bulletin May 2019 (PBT-1905-1)” in the Bulletins group of the Engineering Library Index.

Other updates

Masonry column design (MSJC)

Enhanced to include check of maximum vertical reinforcement diameter.

Rolling load analysis

[TEDDS-3427]1 Enhanced to include the materials shear modulus in the analysis model.

Steel sheet piling design

[TEDDS-3426]1 Modified global SI and US unit examples to fix 'Invalid expression' error.

Australia

Updates

Rolling load analysis

[TEDDS-3427]1 Enhanced to include the materials shear modulus in the analysis model.

Canada

Updates

Rolling load analysis

[TEDDS-3427]1 Enhanced to include the materials shear modulus in the analysis model.

Europe

Updates

Retaining wall analysis & design (EN1992/EN1996/EN1997)

[TEDDS-847]1 - Corrected calculation of inclined load factor, ic, for undrained soils.
[TEDDS-3145]1 - Pass/fail sketch in interface corrected for masonry stem design.
[TEDDS-3157]1 - Amended UI to ensure partial factor, gC, retains correct value when the calculation is rerun.
[TEDDS-3332]1 - Corrected calculation of maximum friction force in output when net pressure is not selected.

Rolling load analysis

[TEDDS-3427]1 Enhanced to include the materials shear modulus in the analysis model.

Steel simple connection design (EN1993)

[TEDDS - 3351]1 Fixed to allow continental steel sections to be selected.

Timber 2D analysis & design (EN1995)
Timber member analysis & design (EN1995)

[TEDDS-3022]1 - Corrected calculation of the torsional moment of inertia, Itor.
Validation added to the input for section depth and breadth in member design calculation to ensure depth is never less than overall breadth of section.
[TEDDS-3246]1 - Corrected undefined variable error associated with outputting results to the summary table.

Footnotes

1 This number is an internal reference number and can be quoted to your local Support Department should further information on an item be required.

Was dit nuttig?