m•connect Tension rod 2 connecting sleeves

Tekla Structures
Not version-specific
Tekla Structures
Environment
Not environment-specific

Generally for both S460 and S560

Select two points in the direction you wish to place the tension rod 2 sleeves. Important here is to set the start point on the left and the direction on the right to get the position in depth of the component correct. The yellow handle symbolizes the start point and the purple handle the end point of the component. The points are positioned in the middle of the hole in the fork head.
Image
Muermann_25.PNG

Settings for the tension rod 2 connecting sleeves

1. Select appropriate size of the tension rod 2 connecting sleeves and press load. All values are automatically loaded into dialog.
Image
Muermann_26.PNG

2. You can also select material from database etc under the parameters tab.
3. Type is generated from size and selections made.
4. The different attribute files for the integrated components can be chosen.
The connecting sleeve can be replaced with the cross sleeve in the component, but it will affect both sleeves.
Was dit nuttig?