View and manage drawings
You can view and manage the drawings added to a job in Tekla PowerFab Go. You can also manage drawing logs, filter drawings, and modify drawing properties and revisions.
To start managing drawings:
View part drawings from cut list
Filter and search for drawings
To |
Do this |
---|---|
Search for a drawing |
The drawing list is updated to only show drawings that match the search term. To show all drawings again, tap X on the right side of the search field. |
Change search criteria for drawing |
|
Show only drawings with a particular drawing type in a particular drawing log |
The drawing list view is updated to match your selection. |
Set a filter for drawings |
The drawing list view is updated to match your filters. |
Customize the columns shown in the drawing list
- Tap Settings in the upper-right corner of the drawing list.
- Select Field settings.
- In the Field settings dialog box, select the checkboxes that represent the columns that you want to see in the drawing list.
- To re-arrange the columns, scroll down in the Field settings dialog box, and drag and drop the columns to a new order.
- Tap Apply settings.
View and download an attached drawing file
The drawing file is downloaded onto your device.
In order to view the drawing file, you need to have an appropriate application for opening drawing files on your device. For example, a PDF reader is needed for opening attached PDF files.
Modify the properties and revisions of an individual drawing
Modify the properties of multiple drawings
A green message appears, informing you that the changes have been made successfully.