Use the Find
Drawing command to quickly find the desired drawing.
-
On the right side of an open
project management job, click Drawing Log.
-
In the context menu, select the drawing log in which the drawing is
stored.
Note that the All Drawing Logs option opens a drawing
log that lists all drawings that you have added, so if you select that
option, you can find any drawing regardless of the drawing log where the
drawing is stored.
-
In the open drawing
log, click the Drawing
Log ribbon tab.
-
On the menu, select
Find
Drawing.
-
In the Enter
Value dialog box, click the arrow on the right side of the Select
drawing # field.
-
Start typing the drawing number in the Select drawing #
field.
Tekla EPM suggests drawings whose drawing numbers start in the same way.
-
Press Enter to use the suggested drawing number.
-
Click
OK, or press Enter again.
Tekla EPM selects the related drawing in the current drawing log.
If the related drawing is in the
drawing log that is not currently open, Tekla EPM will not find the drawing.