In the Piece
Tracking dialog box, you can add tracking information by piece
mark. You can record the stations that the piece mark
has completed, the date, and the man hours used. Piece tracking records can also be added if
the station is set as the TFS station in a route or assigned to an inspection.
-
In the
Production Control dialog box, click the Production Control ribbon tab.
-
On the menu, select
Piece
Tracking.
-
To record information for completed items, in the Station
Summary dialog box, click Add
Completed.
-
In the Station - Add Completed dialog box, select a station in the Station list.
-
Click the arrow buttons to move the items that have completed the selected station to the Included list.
If you cannot see all items that should be available, try selecting the
Include If Previous Station Not Complete check box.
When this check box is selected, items that have not yet completed the
previous station on the route are also shown.
-
Click the arrow on the right side of the Completed
By list and select the user that is adding the piece tracking information.
-
Click the arrow on the right side of the Date field and select the completion date in the calendar.
-
Type the number of working hours
used, and select if the working hours are calculated by piece or as a
total.
-
If necessary, type the batch ID of the selected items in the Batch
ID field.
For example, you can type the
name of the employee who is adding the piece tracking information.
-
To review the inspection test
records of the items before completing stations, click the Inspection button.
-
Click Add
Material to save the piece tracking information.
-
To close the Station
Summary dialog box, click the Close button (X) in the upper-right
corner.