Seismic design rules (Columns: AISC 360)
Additional design rules are required for seismic combinations. These are as per the AISC Seismic Provisions (AISC 341-05) (Ref. 5). These additional design rules ONLY apply to members in Seismic Load Resisting Systems.
The rules applied depend upon the seismic load resisting system as defined in the AISC Seismic Provisions and are listed below:
For a moment resisting frame
9. Special Moment Frame (SMF)
- 9.4a. Classification
- 9.4. Column strength check
- 9.6. Column/beam moment ratio
10. Intermediate Moment Frame (IMF) • 10.4a. Classification
- 10.4. Column strength
11. Ordinary Moment Frame (OMF)
- 11.4. Classification
- 11.4. Column strength check
Moment resisting frame with a truss component
12. Special Truss Moment Frame (STMF) 1- Beyond Scope
For a braced frame
13. Special Concentrically Braced Frames (SCBF)
- 13.2d. Classification
- 13.2b. Column strength check
14. Ordinary Concentrically Braced Frames (OCBF)
- 14.2. Classification
- 14.2. Column strength check
15. Eccentrically Braced Frames (EBF) - Beyond Scope
Buckling resistant braced frame
16. Buckling Restrained Braced Frames (BRBF) - Beyond Scope
Frames containing composite beams
Composite Special Concentrically Braced Frames (C-SCBF) - Beyond Scope
Composite Ordinary Braced Frames (C-OBF) - Beyond Scope
Composite Eccentrically Braced Frames (C-EBF) - Beyond Scope