Tekla Structures 2020 수정 목록

Tekla Structures
2020
Tekla Structures

Tekla Structures 2020 수정 목록

이 페이지에서는 Tekla Structures의 수정 사항을 확인할 수 있습니다. 이번 릴리스의 새로운 기능에 대한 상세 정보는 별도의 릴리스 정보 페이지를 참조하십시오.

Fixes

Defect number Development area Description
TSAC-2395 Concrete components In Wall layout, an error message is now shown in some situations to avoid Tekla Structures from crashing. This error message "Z0" is harmless but we recommend that you save your model when the message is shown.
TSAC-2539 Concrete components Reinforced concrete stair (95): Part prefix and start number properties are now visible in the Reinforced concrete stair (95) dialog box in the Rebar Detailing configuration.
TSAC-2734 Concrete components The Update rebar attributes tool now has a new Update (phase only) button with which you can update just the phase of all rebar coupler/end anchor parts.
The existing Update button still functions as before. You can use the Update button to update the coupler/end anchor-specific UDA values in addition to the phase of coupler/end anchor parts.
TSAC-2908 Concrete components Corbel Reinforcement (81): The main bars now follow the corbel shape properly.
TSAC-2963 Concrete components Reinforcement mesh array in area (89) now creates the reinforcement mesh correctly for the defined polygonal area. Previously, the mesh was not created in some corners of the area and in some cases the mesh extended outside the area.
TSAC-3132 Concrete components Wall layout dialog box has been fixed. Now it works more logically when modifying only the available properties of H, Z1, and Z0 (height, top and bottom level) on the General tab.
TSAC-3180 Concrete components Rectangular column reinforcement (83) now creates intermediate bars between side bars when you have defined an equal number of symmetrical side bars, regardless of the symmetry option you have selected.
TSAC-3214 Concrete components Pad footing reinforcement (77): Rebars are now correctly created in parts with two sloped sides.
TSAC-3272 Concrete components Concrete console (110): Previously, the option to cut extra secondary parts was applied to incorrect parts. This has now been fixed.
TSAC-3362 Concrete components Wall layout elementation has been fixed. You can now use the current units (lbs or kg) as the By weight value in the same way as it has been possible for the maximum weight.
TSAC-3366 Concrete components The Mesh bars and Mesh bars by area dialog boxes are now opened without an error message.
TSAC-3401 Concrete components Wall layout elementation: The distances in the crane properties are now properly converted to ft-in units when using imperial unit settings.
TSAC-3513 Concrete components Anchor (10): The top and bottom offsets were incorrectly calculated for parts with complex parametric profiles and parts that have been cut. This has now been fixed.
TSAC-3523 Concrete components Concrete console (111): Assembly type is now correctly loaded.
TSAC-3524 Concrete components Concrete beam-beam (112): The box used for defining the length of the first washer on the Anchors tab is now dimmed properly.
TSAC-3556 Concrete components Embedded anchors (8): Previously, only concrete parts have been taken into calculations when using the Assembly without steel parts option on the Placement tab. This has now been fixed and miscellaneous parts are also considered.
TSAC-3569 Concrete components Two sided seating with dowel (76): The drainage hole is now generated properly around custom parts.
TSAC-3571 Concrete components Rectangular column reinforcement (83): Bottom/Top crank geometry offset is now applied properly.
TSAC-3587 Concrete components The Wall layout dialog box now supports high-resolution screens with high scaling.
TSAC-3595 Concrete components Concrete console (110): The cast unit numbering standard is now loaded and saved properly for all parts.
TSAC-3602 Concrete components Concrete console (110): Previously, incorrect extra secondary parts were found when you defined them using the class or name. This has now been fixed.
TSAC-3720 Concrete components Two sided seating with dowel (76): The drainage hole is now created properly.
TSAC-3848 Concrete components Floor layout: When creating cast-in-place slabs, Floor layout does not create additional parts in the model origin anymore.
TSAC-3882 Concrete components Wall layout opening: Filler part attributes are not placed between quotation marks anymore.
TSAC-3886 Concrete components Wall to wall connection can now be used on beams based on b×h.
TSAC-1069 Steel components Cold rolled sleeved (2): It is now possible to select the bolt size and bolt standard from catalogs.
TSAC-1528 Steel components Cold rolled sleeved (2): The sleeve profile is now included in the bolted parts.
TSAC-2680 Steel components Previously, Metsec side rails were wrongly being reported as riveted C rails. This has now been fixed.
TSAC-269 Steel components H&V Shear Pl (64): Previously, the shear tab was created incorrectly when the main part had a sloped flange. This has now been fixed.
TSAC-2807 Steel components Bolted gusset (11) now works in the same way in different Tekla Structures versions.
TSAC-2878 Steel components UltraZED Cold rolled sleeved (107): When using a ULT-AB1 profile as the stay cleat profile, the stay was not created correctly. This has now been fixed.
TSAC-2910 Steel components Splice connection (77): Previously, when you defined that flange bolts are not created, the component did not work correctly. This has now been fixed.
TSAC-2954 Steel components In Cornet wrapped gusset (63), filler plates were previously created in an incorrect location. This has now been fixed.
Also, there is now a new option on the Brace conn tab for specifying where the filler plate should be placed when using two connection plates.
TSAC-2990 Steel components In Simple clip angle 2 (82), the copes were previously created incorrectly causing problems with dimensioning in the drawings. This has now been fixed.
TSAC-3010 Steel components Cranked beam (41): Vertical positioning of the bolt groups is now working correctly.
TSAC-3054 Steel components Column with stiffeners (188): Shear tabs are now correctly placed when the main part is created from plates.
TSAC-3129 Steel components In Wraparound gusset (58), Hollow brace wraparound gusset (59) and Wraparound gusset cross (60), there was issue when the connection plate had been created as a through-plate. This has now been fixed.
TSAC-3176 Steel components LS Brace column end plate (24): The gusset plate is now created with the correct shape when connecting only one secondary part.
TSAC-3177 Steel components Cold rolled overlap: Previously, when using user-defined profiles as secondary parts, the cleat was positioned incorrectly. This has now been fixed.
TSAC-3204 Steel components Bolted moment connection (134): Flange plate clearance now works correctly when the connection is connected to the main part web.
TSAC-3271 Steel components Column splice (132): You can now define the number of web bolts when using a division plate and angle profiles as the connection.
TSAC-3295 Steel components Splice connection (77): Weld preparations for web plates are now created correctly and do not cause solid errors anymore.
TSAC-3312 Steel components Joist to column, type 2 (163): Stabilizer angle bolts are now created when the secondary part is sloped.
TSAC-3320 Steel components Cold rolled overlap (1): The cleat is now created correctly when using an L profile.
TSAC-3326 Steel components Seat detail type 1 (1033): If the system default value is not found, the default material is now correctly set from File menu > Settings > Options > Components.
TSAC-3336 Steel components Create hole around part (92): Previously, when the profile length was shorter than the profile height, the cut was created incorrectly. This has now been fixed.
TSAC-3368 Steel components Splice type 1 (56): The Round web plate dimensions option on the Parameters tab now works correctly.
TSAC-3436 Steel components Purlin 1 (61): Previously, the bolts did not bolt all input parts in some situations. This has now been fixed.
TSAC-3440 Steel components Previously, Metsec RoundLok anti-sags were incorrectly creating bolts rather than holes. This has now been fixed.
TSAC-3446 Steel components Tube gusset (20): Previously, the gusset plate was not created correctly in some cases. This has now been fixed.
TSAC-3530 Steel components Gusseted cross (62): The default bolt spacing for angle bolts is now the same both when you enter the number of bolts and when you do not enter the number of bolts.
TSAC-3531 Steel components Brace middle tubes and plate (144): Connection plates are now bolted to the gusset plate in the correct order.
TSAC-3536 Steel components Tube gusset (20): Previously, both above and below line welds were created as above line welds. This has now been fixed.
TSAC-3670 Steel components Working with the Ship ladder (1) component is now must faster than before.
TSAC-3693 Steel components Brace corner tubes and plate (44): Connection plates are now bolted to the gusset plate in the correct order.
TSAC-3795 Steel components Create hole around part (92): Previously, the hole was incorrectly rotated in some cases. This has now been fixed.
TSAC-3837 Steel components Bent plate (151): Previously, stiffeners were not created with the correct length. This has now been fixed.
TSAC-3839 Steel components Column seating (39): Previously, the stiffeners were created with incorrect width. This has now been fixed.
TSAC-3874 Steel components U.S. Base plate (1047): Previously, when one row or column of bolts was defined, the edge distance of the bolts was incorrect. This has now been fixed.
TSAC-917 Steel components Angle profile box (1040): Upper stiffener thickness, width and height are now correctly applied.
TTSD-30725 Organizer In Organizer, project properties were not previously exported to Excel. This has now been fixed.
TTSD-31350 Organizer Previously, synchronization in Organizer was cancelled when the selection in the model was changed. This has now been fixed.
TSAC-2653 Task Manager Previously, changing the parent task of a task by decreasing the indent could cause some other tasks to be deleted in Task manager. This has now been fixed.
TSAC-2797 Import, export, interoperability Layout manager: When importing from a layout point file, the name of the group that will be used is now always based on the name of the imported file.
TTSD-14327 Import, export, interoperability IFC object conversion: Sometimes the whole model was converted as Item. This has now been fixed.
TTSD-17311 Import, export, interoperability IFC2x3 export: The export type Coordination view 2.0 did not always create correct geometry for contour plates with corner chamfers. This has now been fixed.
TTSD-19302 Import, export, interoperability You cannot accidentally snap anymore to the reference model extrema bounding box.
TTSD-20988 Import, export, interoperability When you cancelled the drawing opening, opening the reference model side pane in certain moment caused freezing of the reference model side pane. This has now been fixed.
TTSD-22549 Import, export, interoperability DWG export: When exporting a drawing to DWG, part hatch pattern HSTON3E0 looked wrong if the scale was not the same in X and Y directions. This has now been fixed.
TTSD-27454 Import, export, interoperability IFC object conversion: Curved walls were not converted in the correct orientation. This has now been fixed.
TTSD-27907 Import, export, interoperability The IFC Property set definitions dialog box buttons now work better with Windows scaling.
TTSD-28033 Import, export, interoperability IFC export: The grids were exported incorrectly if you used a base point in the export. This has now been fixed.
TTSD-28521 Import, export, interoperability IFC2x3 export: Surface treatments of rotated parts did not always export correctly. This has now been fixed.
TTSD-28731 Import, export, interoperability IFC  object conversion: Item conversion with almost exactly same geometry failed sometimes. This has now been fixed.
TTSD-29135 Import, export, interoperability IFC object conversion: The IFC object conversion changes list shows object names again.
TTSD-29283 Import, export, interoperability IFC export: Holes for bolts going through both faces of hollow section now exported to IFC more consistently, affecting also STEP and IGES exports done with Multi Converter extension.
TTSD-29389 Import, export, interoperability IFC object conversion: Edge lines are now drawn again when you convert IFC items to native Tekla Structures items with the IFC object converter.
TTSD-29494 Import, export, interoperability IFC2x3 export: The export now uses assembly name for steel parts as well.
TTSD-29674 Import, export, interoperability Both 3D DWG and 3D DGN v8 export now support assembly selection. When an assembly is selected, all objects in the assembly are exported.
TTSD-29882 Import, export, interoperability DWG export: When exporting a drawing in US imperial environment, the preview window width was sometimes not enough to show the whole drawing. This has now been fixed.
TTSD-29888 Import, export, interoperability

IFC export: Previously, exporting a polybeam with a chamfer of over 180 degrees using 3 points did not work correctly. This has now been fixed.

TTSD-29904 Import, export, interoperability DWG drawing export: Drawing DWG export now handles better situations where views are copied from another drawing with layouts.
TTSD-30257 Import, export, interoperability DWG export: Drawing DWG export now handles better views that have cut settings on but with no actual cuts.
TTSD-30650 Import, export, interoperability Sometimes the reference model visibility eye icon state was wrong when you opened the reference model, and you needed to click the icon twice to get the reference model visible. This has now been fixed.
TTSD-30742 Import, export, interoperability The handling of IFC reference models has been improved.
TTSD-30755 Import, export, interoperability 3D DWG and 3D DGN v8 export: Export failed when there was a space in the layer name. This has now been fixed.
TTSD-30846 Import, export, interoperability When you receive a generic error message in Trimble Connector, you can now find further information about the error in an error log file that is generated in the model folder.
TTSD-30924 Import, export, interoperability DWG export: The export is now more reliable when plotting pull-out pictures in templates.
TTSD-31129 Import, export, interoperability IFC2x3 export: The property set mapping double accuracy type is now working correctly, and the size of the export file is reduced.
TTSD-31305 Import, export, interoperability Handling ToDo snapshot views in Trimble Connector has been improved. Now, if the ToDo only has one snapshot view, the camera will be adjusted to match that view. If there are several snapshot views and none of them is selected, Trimble Connector will ask you to select the snapshot view to which you want to match the camera.
TTSD-31360 Import, export, interoperability DWG export: The export now launches a bit faster than before.
TTSD-31430 Import, export, interoperability DWG export: The export is now more robust when the Educational license is in use.
TTSD-32417 Import, export, interoperability Level marks were not correct for B-rep items, as they always showed the elevation of the item's restriction box. This has now been fixed.
TTSD-32669 Import, export, interoperability The extra slowness of IFC change management has now been removed.
TTSD-32858 Import, export, interoperability Trimble Connector: Previously in Trimble Connector, the Refresh button in the ToDo view did not synchronize data from Trimble Connect. This has now been fixed.
TTSD-33039 Import, export, interoperability Point cloud data handling sometimes failed from 2019 SP3 onwards, and attaching the model to Tekla Structures was not possible. This has now been fixed.
TTSD-33077 Import, export, interoperability The .stp reference model insert speed has been improved.
TTSD-33216 Import, export, interoperability Trimble Connector: You can assign ToDos to all users in the Trimble Connect project properly again.
TTSD-33366 Import, export, interoperability When you are attaching your model to a Trimble Connect project, the Trimble Connect - Select project dialog box now shows additional details about the available licenses. This helps you to select the right license when the organization names are the same.
TTSD-33615 Import, export, interoperability Ifc2x3 export: Export using Organizer hierarchies sometimes created openings to wrong level. This has now been fixed.
TTSD-34735 Import, export, interoperability Trimble Connector: When you upload a new version of an overlay model to Trimble Connect, the new model version now uses the same alignment as the previous version.
TTSD-34743 Import, export, interoperability Previously, after excluding a model from Trimble Connect collaboration, you needed to hide the reference models in the Trimble Connect project manually by closing and reopening the Tekla Structures model. Now, the reference models are automatically hidden when you exclude the model from collaboration.
TTSD-27756 Templates and reports PDF reports had incorrect page breaks. This has now been fixed.
TTSD-28023 Templates and reports Reports now show secondary part ID's consistently.
TTSD-29114 Templates and reports Textual and graphical report templates, except mark templates, can now be read from any subfolder of the XS_FIRM or XS_PROJECT folders.
TTSD-32425 Templates and reports Creating reports of very large cast units could cause a crash. This has now been fixed.
TTSD-33080 Templates and reports Template Editor: The CopyField() function now works correctly when used with multilevel hidden rows
TTSD-33313 Templates and reports Template Editor: When a geometry object was edited in a template that also contained a picture object, the performance was poor, and the more you zoomed in, the worse the performance became. This has now been fixed.
TTSD-33325 Templates and reports Template editor: Copying a modified valuefield clipboard caused a crash. This has now been fixed.
TTSD-33849 Templates and reports Using the SIMILAR_TO_MAIN_PART attribute could sometimes cause crash. This has now been fixed.
TTSD-34112 Templates and reports Now when you resize a component by dragging the upper or lower handle, all object positions remain the same relative to the opposite side of the dragged handle. So if the top handle is dragged, the object remains in the same position relative to the bottom of the component.
TSAC-2534 Drawings In Drawing 2D library, the colors Gray 30, Gray 50, Gray 70 and Gray 90 are now correctly converted in 2D details.
TSAC-2745 Drawings Filter dimensioning is now dimensioning all rebars in a group for rebar groups that are not straight bars.
TSAC-2865 Drawings Rebar group dimensioning: Rebar attributes CC_MIN, CC_MAX & CC_TARGET have been adjusted to match the change from being a string type to a double type.
TSAC-2973 Drawings Skewed part shapes are now dimensioned on the part when the dimensioning type is Filter dimensions. Previously, the dimension lines ended on the bounding box of the skewed part.
TSAC-3083 Drawings Views created by the Drawing 2D library can now be rotated.
TSAC-3103 Drawings In Drawing 2D Library, text in texts, marks, and dimensions that have a transpartant background mask are now supported in newly created details. previous all the text in details had Opaque background mask by default.
TSAC-3156 Drawings When you are creating a 2D detail in Drawing 2D library, all the necessary steps are now shown in the status bar at the bottom of the Tekla Structures window.
TSAC-3157 Drawings You can now use multiple symbols when creating a new detail in Drawing 2D Library. All symbols in the detail will have their own properties.
TSAC-3178 Drawings Rebar group dimensioning: The start value of absolute dimensions is now shown correctly again in the Rebar group dimensioning application.
TSAC-3263 Drawings Rebar group marking: Total number in cast unit is now correct for rebar sets.
TSAC-3264 Drawings Template attributes created with the Rebar group dimensioning and Rebar group marking tools now work correctly in dimension marks.
TSAC-3325 Drawings Rebar group dimensioning: Rebar group dimensioning no longer causes crashes. The crashes were caused by incorrect part bounding boxes and incorrectly counted view restriction boxes.
TSAC-3448 Drawings Improvements in the Drawing 2D Library have been done to prevent multi-user models from crashing.
TSAC-3454 Drawings Rebar group dimensioning: The tool now takes the view depths into account to determine the part shape. Previous only the view plane was used.
TSAC-3456 Drawings In Tekla Structures 2019i SP1 in 2D library, texts, symbols, and rectangular polygons in 2D details were misplaced. These misplacements were visible when advanced option XS_​UPSIDE_​DOWN_​TEXT_​ALLOWED was set to TRUE.
TSAC-3607 Drawings Rebar group dimensioning: The symbols were placed incorrectly during the plug-in creation. This has now been fixed.
TSAC-3676 Drawings Rebar group dimensioning: Rebar group dimensioning now works correctly for views that are rotated in cast unit drawings.
TSAC-3690 Drawings Drawing 2D Library had a defect in Tekla Structures 2019i Service packs 1 and 2. The 2D details inserted in section views were incorrectly placed. This has now been fixed.
TSAC-3980 Drawings Drawing 2D Library had a defect in Tekla Structures 2019i service pack 1 & 2. 2D details inserted in section views were incorrectly placed, this has now been fixed. Horizontal section views are now fixed as well.
TTSD-17244 Drawings Changing the units for rebar CC property now works more reliably in drawing marks and dimensions.
TTSD-18347 Drawings Weld marks in drawings that had the size hidden in the weld mark properties were not drawn correctly. This has now been fixed.
TTSD-19675 Drawings In imported .rtf files the table formatting has been significantly improved.
TTSD-19815 Drawings The Document manager error handling has been improved. Now a message is shown if there is a problem reading any of the saved settings files.
TTSD-20248 Drawings Document manager drawing status icons have been improved. Some color was added to improve clarity.
TTSD-20373 Drawings In the Layout editor, moving several templates at once with the Move command now works more reliably.
TTSD-23555 Drawings The column sort in Document manager was not reacting to changes of values of sorted properties. This has now been fixed.
TTSD-24534 Drawings The center-to-center distance in bolt marks now works more reliably.
TTSD-25906 Drawings The Delete button in Document manager has been improved. Now, if you have selected documents in Document manager, clicking Delete deletes selected documents. You can no longer accidentally delete model objects by clicking Select objects in the model for selected drawings and then clicking Delete.
TTSD-26210 Drawings Drawings containing items (shapes) open faster now, especially if items are used as precast concrete parts.
TTSD-26235 Drawings There were dimension points missing in copied and linked views. Now dimensions with points that do not have associativity can be copied and linked to another drawing.
TTSD-26477 Drawings The rebar dimension line now works better for those rebar groups that do not have a planar shape, such as a 3D shape.
TTSD-26916 Drawings When dragging a view in the drawing simultaneously with some content in the same view, the selected content was not staying in the same relative position it was before dragging. This has now been fixed.
TTSD-26957 Drawings Previously the NUMBER_IN_DRAWING attribute was not working correctly with tapered rebar sets. This has now been fixed.
TTSD-2741 Drawings "ą" diacritics could not be used in drawing text window - using shortcut for this letter selected entire text. This has now been fixed.
TTSD-2745 Drawings Filter dimensioning is now dimensioning all rebars in a group for rebar groups that are not straight bars.
TTSD-27794 Drawings Part marks with the Fittings (NS/FS) element can now be merged more reliably.
TTSD-28039 Drawings The CURRENT_DRAWING.TITLE property now correctly returns a value when used with Select from drawing in drawing view properties.
TTSD-28502 Drawings Adding surface treatment marks manually now works more reliably.
TTSD-28665 Drawings Previously, in some cases, cast unit drawings could not be opened because graphical objects, such as rectangles, circles, clouds, and polygons, were not rendered correctly. This has now been fixed.
TTSD-29018 Drawings Moving drawing views from one drawing to another is now more reliable.
TTSD-29396 Drawings The TOP_LEVEL_BASEPOINT value was not displayed in drawing views when the value was zero. This has now been fixed.
TTSD-29496 Drawings DWG drawing export: Exporting multidrawings as DWG files is now more reliable.
TTSD-29559 Drawings During cloning of drawings, the value of the advanced option XS_​DRAWING_​UPDATE_​VIEW_​PLACING is checked before moving a view due to changes in the view extrema box.
TTSD-29639 Drawings Previously, moving part marks with leader lines could sometimes cause Tekla Structures to crash. This has now been fixed.
TTSD-29764 Drawings Inquiring a rebar set from within a drawing did not highlight the corresponding bars in the model. This has now been fixed.
TTSD-30043, TTSD-31893 Drawings In some cases, opening and recess symbols in drawings could cause a crash. This has now been fixed.
TTSD-30191 Drawings Moving copied, linked or multi-drawing container views in drawings was not working. This has now been fixed.
TTSD-30329 Drawings Document manager could crash if a large number was entered into the search. This has now been fixed.
TTSD-30510 Drawings Perpendicular leader line lengths are now shown in correct scale for views that have a scale value below 1.
TTSD-30812 Drawings In some cases rebar mark was incorrectly placed. This has now been fixed.
TTSD-30862 Drawings Sometimes precast parts with more than 500 edge lines were incorrectly shown in drawing views. This has now been fixed,
TTSD-31166 Drawings Opening general arrangement drawings that were created in Tekla Structures versions older than 2017 is now faster.
TTSD-31361 Drawings In some cases, when a GA drawing view was created with certain view settings, it would behave incorrectly when you adjusted the view frame. This has now been fixed.
TTSD-31426 Drawings Copying objects from a drawing view to a drawing sheet could sometimes cause a crash if the drawing view scale was more than 1:100. This has now been fixed.
TTSD-31453 Drawings There was a crash when you made unfolded drawings of planar lofted plates. This has now been fixed.
TTSD-31682 Drawings You can now use drawing layout (.lay) files that are stored in XS_FIRM and XS_PROJECT folders and their sub-folders for editing drawing layouts.
TTSD-31938 Drawings When moving views from one drawing to another, some dimensions were sometimes rotated a bit. This has now been fixed.
TTSD-32338 Drawings In some cases, a file missing from the environment could cause a crash. This has now been fixed.
TTSD-32487 Drawings Tekla Structures crashed when you opened some specific drawings. This has now been fixed.
TTSD-32524 Drawings Curved dimensions in drawings can now be drawn with short extension lines. Earlier, the Short extension line setting in dimension properties did not work for curved dimensions.
TTSD-32546 Drawings If undoing moving a drawing view, the view contents were not properly refreshed if the view did not have any labels. This has now been fixed.
TTSD-32569 Drawings The printing did not use the name given to the single file in the printing dialog box. This has now been fixed.
TTSD-32762 Drawings Korean language characters in dimension tags were not displayed correctly. This has now been fixed. The fix can be taken into use by adding the advanced option XS_ENABLE_DIMENSION_TAG_CHARACTER_SET_FIX=TRUE in an .ini file, for example, user.ini. Unfortunately, when the fix is taken into use, the tag mark content Size is displayed incorrectly (?00*800? instead of (400*800), therefore the default value is FALSE.
TTSD-33511 Drawings Previously, in drawing properties, changing a drawing layout with a long name to another drawing layout sometimes did not work. This has now been fixed.
TTSD-33642 Drawings Adding revisions to drawings with tables that contain the NUMBER attribute now works correctly.
TTSD-33730 Drawings UDAs were not loaded to the drawing properties dialog boxes if the User-defined attributes section in the properties dialog box had not been opened first. This has now been fixed.
TTSD-34412 Drawings Previously, the drawing dimension associativity rule list was sometimes invisible when it should not have been. This has now been fixed.
TTSD-31202 System and options The following files are now read correctly from the XS_FIRM and XS_PROJECT subfolders: profdb.bin, profcs.bin, pgdb.bin, matdb.bin, screwdb.db, and assdb.db.
TTSD-31625 System and options Tekla Structures can now read .xml files from the sub-folders of XS_FIRM and XS_PROJECT folders.
TTSD-16143 Tekla Model Sharing Previously, when a part was moved from one assembly to another in a shared model, and changes by another user were then read in for the moved part, the part's old assembly was shown as modified in the Changes list. This has now been fixed.
TTSD-26304 Tekla Model Sharing In some situations, conflicts in the model could cause the error "Dbvirtual fatal error: internal consistency failure" in read in and restart of Tekla Structures. This has now been fixed.
TTSD-27196 Tekla Model Sharing Previously, when a reference model was locked locally before read in, you had to reopen the model to update the reference model version. This has now been fixed.
TTSD-27827 Tekla Model Sharing The following fixes have been made in Tekla Model Sharing:
- The green arrow on the Read in button is now shown correctly if there are no packets available to read in.
- Previously, if model changes were written out too many times within a short time frame, Tekla Structures sometimes lost track of the changes and could not show the number of packets that users could read in. This has now been fixed.
TTSD-30021 Tekla Model Sharing Tekla Model Sharing: In the Users dialog box, check marks are now shown again for users that have joined the shared model.
TTSD-30977 Tekla Model Sharing In Tekla Model Sharing, importing or exporting parametric user-defined profiles in the .lis format is no longer possible without a subtype. This will prevent creating broken or incorrect files.
TTSD-32744 Tekla Model Sharing Previously, changes made in the rebar catalog were not included in write-out packets, if the changed rebars were only used in rebar sets in the shared model. This has now been fixed, so that all rebar catalog changes are included in write-out packets.
TTSD-34133 Tekla Model Sharing When a shared model is read in, and Tekla Structures sets the rebar numbering in drawings as not up to date because of numbering conflicts, the part numbering and the cast unit numbering are now also set as not up to date.
TSAC-3344 Reinforcement In Rebar shape manager, the rule operand REVERSED was not previously available for curved/circular bars, and therefore it could not be used in shape definitions. This has now been fixed.
TSAC-3345 Reinforcement In Rebar shape manager, some extra leg/bending rule operands were previously occasionally shown with short curved bars. These obsolete operands are not shown anymore.
TSAC-3428 Reinforcement Rebar shape manager has been changed so that a bar that contains multiple sequential bends forming a circular arc (according curve tolerance) is converted to an arc only when the bending angles are smaller than ~34 degrees. In practice, a 10-sided polygonal stirrup will never be converted to a circular arc but if the stirrup contains 11 or more sides, it may be converted to a circular arc if it fulfills the curve tolerance value.
TSAC-3477 Reinforcement Rebar shape placing tool has been fixed so that the hook type and length are now set correctly.
TSAC-3728 Reinforcement The following changes have been made in Rebar shape manager:
  • A new bending shape property Arc twist angle (AT) has been added for all curved legs. This property has a non-zero value when the bar has a 3D shape. The value may also be -180 if the curved arc rotation is in different direction than the previous arc or bending.
  • The bending twist angle (T) value is given also for the first bending if the first leg is curved.
  • The previous new properties AT and T are also included as shape code rules.
  • The properties AL, AA, RI, and RO can now be used in formulas.
  • Polygonal bars are no longer converted into curved bars if the curve is not on the same plane (and if only the projection of the geometry is a circular arc).
TTSD-13154 Reinforcement The visualization of curved and circular reinforcing bars containing hooks has been improved where previously the hook bending was not correctly represented.
TTSD-15678 Reinforcement The threading visualization used in rebar sets is now also available for reinforcing bar groups and single reinforcing bars.
TTSD-27901 Reinforcement All template attributes starting with CRANK_ can now be used to report crank properties when cranking is created by using end detail modifiers.
TTSD-27964 Reinforcement Previously, Tekla Structures crashed when you copied rebar set properties and other objects were selected along with the target rebar set. This has now been fixed.
TTSD-28607 Reinforcement Previously, Tekla Structures could crash if a rebar set contained an end detail modifier defining a custom hook with zero angle. Sometimes such hook definitions could also prevent the model from being opened. This has now been fixed.
TTSD-29759 Reinforcement When attaching rebar set bars to concrete parts, Tekla Structures now uses the center of bars instead of the center of gravity to determine to which parts the bars are attached. Previously, using the center of gravity could cause rebar set bars to be attached to incorrect parts as the center of gravity could locate outside the bars. This happened to L-shaped bars, for example.
TTSD-30092 Reinforcement In rebar sets, the default hook direction now depends only on the first leg. Previously, it was determined from the first two legs including a possible cranked leg at the other end of the bar.
TTSD-31061 Reinforcement Previously, rebar set adaptivity did not work correctly when magnetic grid planes were used in the model. This has now been fixed.
TTSD-31463 Reinforcement Previously, all rebar sets were modified after you set the work plane. This happened when you deleted a rebar set, undid the delete command, and then updated the window. This has now been fixed.
TTSD-32199 Reinforcement Previously, when you created a concrete part with a round part cut, a rebar set bar that intersected the edge of the cut was not correctly attached to the concrete part. This has now been fixed.
TTSD-7959, TTSD-31577 Reinforcement Split rebar groups are now mirrored correctly.
TTSD-8028, TTSD-8098 Reinforcement Tapered (or tapered ridge, tapered curved) rebar groups with excess exact spacing values are now mirrored correctly.
TTSD-8097 Reinforcement Previously, when direct modification was used to create exact spacings and a zero/negative end offset for a rebar group, the rebar group was not mirrored correctly. This has now been fixed.
TTSD-16351 Modeling Previously, pour breaks did not work in some cases when the parts forming the pour were very slightly tilted. This has now been fixed.
TTSD-22467 Modeling Previously, there was a second cursor drawn in the model origin when you rotated the view. This has now been fixed, and the additional cursor does not show up in the model origin.
 
TTSD-24624 Modeling Snapping in the orthogonal Z direction has been improved. It is now easier to shorten or lengthen a column, for example.
TTSD-26805 Modeling In some cases, weld preparations were not shown in the model after copying. This has now been fixed.
TTSD-27047 Modeling Previously, if there was a conflict in a multi-user model and you clicked Review in the conflict message dialog box, Tekla Structures showed an error message when you viewed the conflict log. Now the error message is not shown anymore in conflict situations.
TTSD-27826 Modeling In some cases, for example, when the plane of a part face or an opening face ran through an opening in the part and its pour break plane, the pour break was not created or it became invalid. This has now been fixed.
TTSD-28366 Modeling Selecting points that are already selected is now possible after changing the object creation type, for example, creating a polycurve and switching the creation method from arc to line.
TTSD-28434 Modeling Previously, a model with rebar sets could not be reopened after repairing the model if XS_DELETE_UNNECESSARY_INT_ARRAYS was set to TRUE. This has now been fixed.
TTSD-28510, TTSD-29504, TTSD-30166 Modeling Earlier, when creating a view along the grid lines for rotated views, incorrect views were created. This has now been fixed.
TTSD-28673 Modeling Previously, classifying some shapes as non-solids was not correct. Now these shapes are classified as solids.
TTSD-28722 Modeling When you added a new grid line, or removed or dragged an existing grid line of a rotated rectangular grid using direct modification, the grid was not modified correctly. This has now been fixed.
TTSD-28936 Modeling Empty values in the chamfer properties will now be saved as a length of 0 units. This fix also removes the crash that happened in place of the desired behavior.
TTSD-29032 Modeling In the Object Group - View Filter dialog box, the values in the Property column no longer disappear when entered with a space at the end of the value.
TTSD-29098 Modeling When using a main part UDA value in the assembly or cast unit position, Tekla Structures erroneously showed the default value of the UDA. This has now been fixed.
TTSD-29109 Modeling When you create lofted plates using two construction objects, after you have selected the first construction object and you place the mouse pointer on the second construction object, Tekla Structures now shows a preview of the lofted plate boundaries.
TTSD-29167 Modeling Object filters are now correctly loaded from the subfolders of the XS_FIRM and XS_PROJECT folders.
TTSD-29400 Modeling Earlier, when diagnosing models containing spiral beams with a 360-degree turn and no total rise, model inconsistencies were reported. When repairing such models, these spiral beams were removed from the models. This has now been fixed.
TTSD-29630 Modeling Snap symbols are correct size in the DirectX rendered model views also when you zoom out.
TTSD-29673 Modeling Parts whose material is Formwork_undefined are no longer added to the pour unit when you use the Calculate pour units command. However, you can manually add these parts to pour units if the cast unit type is precast.
TTSD-29706 Modeling Previously, moving a bolt caused its phase to reset to 0. This has now been fixed.
TTSD-29820 Modeling Profiles with zero decimals (for example, C130X2.0) were not shown correctly in the model (their detailed shape was lost and did not contain roundings, for example). This applied to fixed profiles which were created from sketched profiles. Now this has been fixed.
TTSD-29843 Modeling Previously, it was not possible to enter the decimal symbol after the inch symbol when defining radial grid properties in the property pane or when using the Radial grid component. This has now been fixed and you can enter values in the format 1'-2".5, 1-2".5, or just 2".5.
TTSD-29844 Modeling Previously, it was not possible to enter the decimal symbol after the inch symbol when defining rectangular grid properties in the property pane. This has now been fixed and you can enter values in the format 1'-2".5, 1-2".5, or just 2".5.
TTSD-29911 Modeling While editing the geometry of an item and selecting another item, the handles stayed on the original item. This has now been fixed.
TTSD-30036 Modeling Shapes that are inserted to a model are now copied to the model folder.
TTSD-30048 Modeling Previously, saving a multi-user model reset the phase numbers to the current phase. This has now been fixed.
TTSD-30122 Modeling Views along grid lines were not created properly if the work plane was set to some other plane, for instance, when the work plane was rotated. This has now been fixed.
TTSD-30150 Modeling Welds in components are now taken into account in clash checking.


TTSD-30193, TTSD-30430, TTSD-30389 Modeling Previously, creating views along the grid lines did not work correctly when the grid had a non-zero origin. This has now been fixed.
TTSD-30392 Modeling When you split a lofted part, the height dimensions now remain the same as before the split.
TTSD-30606 Modeling Previously, if you made large selections in the model, loading properties to the property pane could be extremely slow. Now this does not happen anymore. The performance issue with large selections has been fixed.
TTSD-30766 Modeling Each surface is now added to a single flat or curved part face or pour object face. Surfaces no longer extend over fillet edges between flat and curved faces.
TTSD-30827 Modeling The Move special > Mirror and Copy special > Mirror commands now work correctly for radial grids.
TTSD-30956 Modeling Previously, when modifying the geometry of an item, the reference point was sometimes lost when adding an edge to the item. This has now been fixed.
TTSD-31203 Modeling The profitab.inp profile catalog file can now be read from the XS_FIRM and XS_PROJECT subfolders.
TTSD-31237 Modeling

Sometimes, when you used direct modification to modify the height of a lofted plate, the height was modified in the opposite direction when you entered a dimension. This has now been fixed.

Image
dimension arrows.png

TTSD-31380 Modeling In DirectX rendered model views:

- With the Parts wireframe / Components wireframe (Ctrl/Shift+1) rendering option all edgelines are now shown.

- With the Parts shaded wireframe / Components shaded wireframe (Ctrl/Shift+2) rendering option the underlying objects can now be seen through.

- Connected part edges are now shown correctly.
 
TTSD-31395 Modeling Certain types of pour breaks now work on slabs with recesses.
TTSD-31648 Modeling Previously, while adding an edge to an item, using the Undo command caused the Edge command to stop working properly. This has now been fixed.
TTSD-32240 Modeling Previously, the snap tooltips hid the snap symbols in some cases. This has now been fixed and the snap tooltips do not overlap with the snap symbols anymore. 
TTSD-32449 Modeling Previously, polycurve geometry was removed when repairing the database if the XS_DELETE_UNNECESSARY_INT_ARRAYS advanced option was set to TRUE. This lead to corrupted polycurve geometry that caused Tekla Structures to crash. This has now been fixed. Polycurve has been added to the Diagnose model command so that it removes the corrupted geometry. In this situation you need to recreate the polycurve.
TTSD-32752 Modeling Previously, lofted plate geometry was removed when repairing the database if the XS_DELETE_UNNECESSARY_INT_ARRAYS advanced option was set to TRUE. This resulted in corrupted lofted plate geometry and the next repair would delete the lofted plate parts. This has now been fixed. Lofted plate has been added to the Diagnose model command so that it removes the corrupted geometry. In this situation you need to recreate the lofted plate.
TTSD-32783 Modeling Previously, creating a view from a radial grid when the view was different from the default XY plane view produced incorrect results. Now this has been fixed.
TTSD-32861 Modeling Previously, in DirectX rendered model views, the snap cursor line occasionally turned black. This has now been fixed.
 
TTSD-33083 Modeling

The following folders and all their subfolders are now excluded from property file search in the XS_FIRM and XS_PROJECT folders, but only if they are immediate subfolders of the XS_FIRM and XS_PROJECT folders:

  • ProjectOrganizerData
  • AdditionalIPSets
  • macros
  • Drawing Details (note that there is a space in the folder name)
  • extensions
  • CustomInquiry
  • PropertyRepository
  • symbols
  • template
  • profil
TTSD-33288 Modeling Previously, pour breaks did not work in some cases where the parts forming the pour overlapped and shared a face. This has now been fixed.
TTSD-33373 Modeling The contents of an assembly are now shown correctly when using the Assembly > Show assembly command.
TTSD-33487 Modeling Tekla Structures model background colors are now correctly set back to the default colors when leaving the background color advanced options values empty.
TTSD-33605, TTSD-31590 Modeling Previously, when you created a stand-alone bent plate so that the top arc start point was the same as the top arc center point, Tekla Structures stopped working. This has now been fixed.
TTSD-33724 Modeling When you redraw a DirectX rendered model view, parts do not disappear anymore.
TTSD-34006 Modeling Previously, the sketch editor could crash in certain situations. This has now been fixed.
TTSD-34291 Modeling The notifications.xml file is now again saved in the <user>\AppData\Local\ folder.
TTSD-34414, TTSD-33389 Modeling Previously, when running the Diagnose model command, Tekla Structures displayed a small warning dialog box. Now this warning dialog box is not shown anymore.
TTSD-5272 Modeling Pour breaks now work more reliably in cases where the parts forming a pour object partially touch each other.
TTSD-31525 Licensing The error message for an expired Tekla Structures license has now been fixed.
TSAC-3626 Installation Migration wizard now works correctly with various monitor resolutions.
TTSD-23957 Analysis and design Loads are now visible in the DirectX rendered model views with all rendering options.
TTSD-27651 Analysis and design Where compatible versions of Tekla Structures and Tekla Structural Designer are installed on the same computer, models can now be transferred directly, without manually exporting a file from one product and then manually importing it in the other.
TTSD-28470 Analysis and design When analysis results have been included in a .cxl file exported from Tekla Structural Designer, Tekla Structures saves the results of all load combinations in the analysis results database.

The maximum axial force, shear force, and bending moment at the part ends are saved as user-defined attributes in the part properties.
TTSD-30736 Analysis and design Previously, the selected analysis part handle disappeared when moving the cursor in the view. This has now been fixed.
TTSD-30763 Analysis and design Previously, moving an analysis node did not create the correct result when multiple parts were connected to the node. This has now been fixed.
TTSD-33171 Analysis and design When you modified a property in the Analysis model properties dialog box and clicked OK, and then used the Undo command, the modified property still stayed in the Analysis model properties dialog box. This has now been fixed.
TSAC-2579 Tools and components Sometimes, it was not possible to open the Layout line dialog box by double-clicking the thumbnail image in the Applications & components catalog. This has now been fixed.
TTSD-21410 Tools and components Outdated locked custom part instances are no longer automatically updated when they or their objects are unlocked.
Outdated custom parts are updated to use the latest definition with modify when the custom part or its objects are not locked anymore.
TTSD-27133 Tools and components The Shape value type is now available in the custom component editor. You can use it to open the shape catalog from the custom component dialog box.
You can use the new value type in existing custom components that include items by editing the components.
TTSD-27198 Tools and components Previously, clash check could fail to detect clashes involving rebar sets with hooks. This has now been fixed.
TTSD-27819 Tools and components Previously, rebar set modifiers and splitters were hidden in the custom component editor if the XS_REBARSET_SHOW_MODIFIERS_CREATED_BY_COMPONENTS advanced option was set to FALSE. This advanced option should only apply to component instances, not to the component editor. This has now been fixed.
TTSD-28207 Tools and components Previously, there was an error when publishing a custom component in the Applications & components catalog when another component of a different type with the same name as the custom component already existed. This has now been fixed.
TTSD-32726 Tools and components In custom components, bitmap (.bmp) images from the model folder are now correctly shown in the component dialog box.
TTSD-34140 Tools and components Applications & components catalog: Importing a .uel file immediately after creating a new model could result in the automatically imported catalog information (for example, thumbnails) being lost. This has now been fixed.
TTSD-20075 Numbering "PRELIM_MARK" and "PRELIM_ASSEM_MARK" have been changed to unique_attribute in the objects.inp file. This means that when you copy parts, the preliminary numbers are not copied to the new parts.
TTSD-15532 User interface The availability of material, thickness and color properties according to the surface treatment types in the property pane has been corrected.
TTSD-24055 User interface Side pane windows no longer move slightly to the left when floated.
TTSD-26021 User interface Several fixes have been made to DirectX graphics both in object visualization and performance.
In DirectX views, the clip planes do not disappear anymore in plan views.
TTSD-26162 User interface Property pane no longer displays visibility settings for property groups that do not have any properties to be shown.
TTSD-27237 User interface Sometimes, when you created a view, the work plane was moved to the model origin. This has now been fixed.
TTSD-27766 User interface The work plane was sometimes moved to the model origin when the view was created of the selected objects. This has now been fixed.
TTSD-28663 User interface Previously, when you modified a UDA that did not affect numbering by using the property pane, Tekla Structures still considered the model object as needing renumbering. Now this does not happen anymore.
TTSD-28885 User interface Previously, the work plane was set to the model origin when creating default views. This has been fixed and the work plane now remains in the previously set location.
TTSD-28921 User interface In the Property pane settings, the items in the property group list now have fixed height.
TTSD-28996 User interface The following visibility issues have been improved:
  • Concrete will now be transparent after creating rebar groups.
  • Construction objects are now visible when selected.
TTSD-29273 User interface Earlier, it was not possible to add rectangular or radial grid and grid plane UDAs to the property pane. This now has been fixed.
TTSD-29328 User interface Rebars are now visualized correctly also when they are very far away from the model origin.
TTSD-29452 User interface In some rare cases when dragging a table in Layout editor, the Tekla Structures user interface was no longer responding. This has now been fixed.
TTSD-32086 User interface The contextual toolbar now loads the previously used contextual toolbar profile when Tekla Structures is started even if the profile file is saved in the firm folder. The firm folder location needs to be defined in the teklastructures.ini file.
TTSD-33507 User interface Previously, changing very long rebar bends to straight bars in large rebar sets could cause Tekla Structures to stop working. This has now been fixed.
TTSD-33699 User interface Previously, picking a point to create a new beam in the model could be slow. Now the performance of the property pane has been improved to make creating beams faster.
TTSD-34115 User interface The property pane now shows the properties that have validation errors because of empty values even if Show properties that have a value is selected in the Property pane settings.
TSAC-3605 Import, export, interoperability (steel) NC files: The quantity of parts in the NC file was incorrect when hardstamp with assembly position was used and the advanced option XS_SECONDARY_PART_HARDSTAMP was set to TRUE. This has now been fixed.
TSAC-3481 Import, export, interoperability (concrete) BVBS Export: Previously, export was prevented if the intended output folder could not be found. Now the defined folder path is created.
TSAC-3574 Import, export, interoperability (concrete) BVBS Export: When the Drawing name source property cannot be found, a message is now added to the export log.
TSAC-3736 Import, export, interoperability (concrete) BVBS Export: For the file name option [Assembly template], any assembly or main part USERDEFINED property can now be used even if they are not included in any of the contentattributes.lst files.
Was this helpful?
이전
다음