To apply and manage the various defaults and settings that apply to the current project, see the following instructions.

1. On the Home tab, click Model Settings.
2. Adjust the Model Settings according to your needs.
3. After adjusting the settings, do one of the following:

   To	Do this
   Apply the changes to the current project	Click OK.
   Save the changes back to the active settings set for future use	Click Save...
   Cancel the changes	Click Cancel.
   Revert to the model settings specified in the active settings set	Click Load... Note: Clicking Load... loads all of the model settings from the active settings set, not only those specified on the current page of the Model Settings dialog box. Analysis options and design options are not loaded.