Adjust labor times for burning

Tekla PowerFab
2022
Tekla PowerFab Tekla PowerFab GO

Adjust labor times for burning

In Burn Maintenance, you can view, add, and modify burn time information to match the time standards of your shop. If necessary, you can also add new burn types or create a list of burn rates.

  1. Click the Maintenance ribbon tab.
  2. On the menu, select Estimating > Labor Maintenance > Burn.
  3. In the Burn Maintenance dialog box, do any of the following:
    To Do this

    Add new burn rate

    1. Click New.

    2. In the Shop Setup list, select the shop to which you want to add the burn rate.

    3. In the Burn Type list, select how the burning process is executed:
      • Use Automatic for automated equipment.

      • Use Semi-Automatic for track burners.

      • Use Manualfor burning by hand torch.

    4. Determine the thickness and rate per hour.

    5. Click Add.

    Modify an existing burn rate

    1. Select a burn rate in the list.

    2. Modify the thickness and rate per hour.

    3. Click Edit to save the changes.

    Delete a burn rate

    1. Select a burn rate in the list.

    2. Click Delete.

    3. To permanently delete the burn rate, click Yes in the confirmation dialog box.

도움이 되었습니까?
이전
다음