Mini Seam Applicator

Tekla Structures
Not version-specific
Tekla Structures
Environment
United States (Imperial)
United States (Metric)

Back to top

Purpose and description

Makes placing multiple seam components along the joint between two parts easier and faster. The joint will automatically be found and the overlapping volume can have multiple custom seams placed long its length with different spacing options. This extension inserts multiple custom seam components between the geometry of two parts in the joint region.

Back to top

Mini Seam Concept

A Mini-Seam is a custom seam between two parts that puts in only a single set of connectors between parts. The two input points for the custom seam are defined in the center of the connecting hardware location between the two input parts. Instead of one long seam connection with multiple sets of connectors that use the array macro to copy additional connecting hardware along seam, you have one custom seam that only inserts a single set of connection plates/embeds inserted multiple times along the seam joint region. The custom seam that you create should only create one connector set starting at input point in the center for first connection location (custom seam input points) between the two members and have a second point that goes approximately 3" along the seam joint in the middle. There are typically fewer bindings and less complex logic needed for these type custom seams due to the fact that the 1st input handle determines the location center for all the conencting hardware directly and the 2nd input handle establishes the joint direction and center location.

Image
mini_seam_conc.png

  Back to top

System requirements

Environments: US Imperial, US Metric
Languages: English
Back to top

Installing Mini Seam Applicator

To install the application:

  1. Close Tekla Structures (if running)
  2. Download MSI Installer from Tekla Warehouse
  3. Run the MSI Installer
  4. Start Tekla Structures
  5. Open Model
  6. Before version 2016: A new toolbar icon which will launch the tool should now be visible when a model is opened. For 2016 version and newer: a new thumbnail under Ungrouped items in the Applications and components side pane will appear.
Back to top

Using Mini Seam Applicator

  1. Select the primary part to connect.
  2. Select the secondary part to connect.
  3.  
  4. Example application in model:

Image
Image_001.jpg

 

Image
MiniSeamApplicator.png

 

Another example application in model between foundation beam and wall:

Image
MiniSeamApplicatorView.png


Example custom 'mini-seam' editor view:
Image
MiniSeamEditorView.png

Back to top
役に立ちましたか?