Engineering library update - July 2022

Tekla Tedds
2022
Tekla Tedds Tekla Tedds for Word

Engineering library update - July 2022

Tekla Tedds engineering library update (July 2022 - version 24.04) is available in Tekla Downloads.

American Design

Wood member design (NDS)

Enhanced to allow deflection checks to be included when the calculation is used via it's Calc API. When used with Tekla Structural Designer 2022 Service Pack 2 or later the appropriate data for deflection checks will be automatically included when designing timber members from Tekla Structural Designer.

Product bulletin June 2022 (PBT-2206-1)

Wood 2D/member analysis & design (NDS) - Fixed a potentially un-conservative error affecting the calculation of deflection in members affected by either incising, elevated temperatures, or the wet service condition. For more detailed information please refer to Product bulletin June 2022 (PBT-2206-1).

Other Updates

 
Column base plate design (AISC360)
TEDDS-6896 Fixed an undefined variable error when only axial force was specified.
 

Wood member design (NDS)

Wood member analysis & design (NDS)

Wood 2D analysis & design (NDS)

TEDDS-6653 Updated the composite datalist "Composite lumber reference design values-NDS.dls" in accordance with the APA Product Report for RigidLam Feb 2022.

Australian Design

No updates.

British Design

No updates.

Canadian Design

No updates.

Eurocode Design

Timber member design (EN1995)

Enhanced to allow deflection checks to be included when the calculation is used via it's Calc API. When used with Tekla Structural Designer 2022 Service Pack 2 or later the appropriate data for deflection checks will be automatically included when designing timber members from Tekla Structural Designer.

Other Updates

 

RC beam design (EN1992)

RC 2D analysis & design (EN1992)

RC beam analysis & design (EN1992)

TEDDS-6912 Fixed the National Annex defined crack control equation being overwritten by the 'Initialise crack expressions' item.
 

Precast concrete stair design (EN1992)

RC stair design (EN1992)

TEDDS-6613 Enhanced to remove the minimum number of risers limitation so that stairs with 1-4 risers can be designed.
TEDDS-6614 Enhanced to remove the minimum lower landing length limitation so that a value of zero can be used to design stairs with no lower landing.
 
RC pile cap design (EN1992/EN1997)
TEDDS-6803 Fixed undefined variable '_DRVRdmaxCritID' when designing a triangular pile cap.

 

 
Steel masonry support (EN1993)
TEDDS-6829 Fixed validation on Geometry button for plates to underside of beam.
TEDDS-6932 Fixed incorrect default load combination when using a national annex that only has one combination for Eqn6.10a/b available.
 
Timber frame racking loads (EN1991)
TEDDS-6895 Fixed undefined variable error when selecting the Irish NA with a duopitch roof.
役に立ちましたか?
前へ
次へ