Review ribbon

Tekla Structural Designer
2021
Tekla Structural Designer

Review ribbon

  • Type droplist - Filters status and ratio displays to show results for Static designs, RSA designs or the Combined designs.

Design

Command Description
Status - Display member status.
Ratio - Display member utilisation ratio.
Depth Ratio - Display beam span to depth utilisation ratio.

Foundations

Command Description
Status - Display foundation status.
Ratio - Display foundation utilisation ratio.

Piles

Command Description
Status - Display pile status.
Ratio - Display pile utilisation ratio.

Slab/Mat Design

Command Description
Status - Display slab/mat status.
Ratio - Display slab/mat utilisation ratio.
Slab/Mat droplist - Filters the status and ratio displays to show results for the selected category.
Status - Display connection status.
Ratio - Display connection utilisation ratio.

Connections

Command Description
Status - Display connection status.
Ratio - Display connection utilisation ratio.

Show/Alter State

Command Description
Auto/Check Design - Each member is color coded to indicate its autodesign setting (On or Off). Clicking on a member toggles its setting.
Diaphragm On/Off - Each slab panel and diaphragm node is color coded to indicate its setting (Excluded or Included). Clicking on a slab or a diaphragm node toggles its setting.
Fixed/Pinned - Each member is color coded to indicate its end fixity setting (N/A, Pinned, Fixed, Moment, Mixed, Cantilever). Clicking on a member toggles its fixity setting between those that are applicable.
BIM Status - Each member is color coded to indicate its BIM status.
Slab/Foundation Reinforcement - Use property grid to review and edit or rationalize panel or patch reinforcement, or isolated foundation reinforcement.
Section Material/Grade - Each steel member is color coded to indicate its section and grade. Clicking on a steel member updates its section and/or grade to match what you have set in the Properties window.
Copy Properties - Copy properties from one member to another. After firstly selecting a parameter in the Properties window you are able to copy it from a designated source member to valid target members.
Report Filter - Only accessible once a Member filter has been defined. Each member is color coded to indicate if it is included in the currently selected filter. Clicking a member toggles its inclusion status.
Sub Structures - Create selected sub-sets of the structure and use for more focused editing, design, review and reporting purposes.
Concrete Beam Flanges - Each concrete beam is color coded to indicate its if flanges are considered and flange widths determined.
Column Splices - Potential splice locations in steel columns are color coded to indicate where splices exist.
Property Sets - Graphically review and modify the property set assigned to the elements by using the property grid. In a typical model you may wish to apply the same properties to similar model objects. This can be done efficiently using property sets.
UDA - Eraphically review and modify the attribute values assigned to the elements by using the property grid. User defined attributes allow you to save your own data to individual elements. These can be used to select similar elements based upon their UDA group or filter report content based on a UDA.
Show/Alter State - The full range of options is available by selecting this and using the attribute drop down in the property grid.

Design Data

Command Description
Tabular Data - Open the review data view in which all sorts of design results and quantities information can be reviewed.
役に立ちましたか?
前へ
次へ