Use the Find Drawing command to quickly find the desired drawing.

1. On the right side of an open project management job, click Drawing Log.
2. In the context menu, select the drawing log in which the drawing is stored.
   Note: The All Drawing Logs option opens a drawing log that lists all drawings that you have added, so if you select that option, you can find any drawing regardless of the drawing log where the drawing is stored.
3. In the open drawing log, click the Drawing Log ribbon tab.
4. On the menu, select Find Drawing.

   The Enter Value dialog box opens.

5. Do either of the following:
   • Select a drawing in the Select drawing # drop-down list.
   • Start typing the drawing number in the Select drawing # list.

     Tekla PowerFab suggests drawings whose drawing numbers start in the same way.

6. Click OK.