When importing an IFC file into Estimating, beams with the dimension format "Depth x Width x Web Thickness x Flange Thickness" could import holes with an incorrect depth. This issue has now been fixed.

Previously, in Production Control, when creating a cut list and using a Material Status filter to restrict to only In Stock material and exactly the same cutting pattern existed with quantities both in stock and on order, it was possible for the on order records to be saved to the cut list. This issue has now been fixed.

Previously, in Production Control, curves in certain DXF files were not read correctly, which resulted in an incorrect plate area and weight. This issue has now been fixed.

Previously, in Production Control, when reading DSTV files, bevels with a height of 0 were ignored. This issue has now been fixed.

Previously, in Production Control, the Shipping Route Maintenance dialog box displayed all destination groups as Jobsite. This issue has now been fixed. (64-bit only)

In Production Control, the weights were incorrect on the Cut List (Ascending) reports. This issue has now been fixed.

When the system was set up to use the ProNest extension, an error occurred during the Inventory HTML import. This issue has now been fixed.

In a combining job, an error occurred when manually adding a line item with a shape that had only a dynamic text dimension (ex. BY, CO). This issue has now been fixed.

Previously, in an SDS/2 import, when the user selected not to import Details, but a Detail Sheet was found to match a member, the member and its parts were imported with a member quantity that was reduced by one. This issue has now been fixed.

When importing a file from SDS/2 into Production Control, if there were two parts with different piece marks that were flagged as being main materials then the second was seen as a duplicate and ignored. This issue has now been fixed.

Trimble Connect: Support added for the new Australia server location.

When using the STS/STSX barcode integration, an inspection failure on a single instance of a part prevented other instances of that part from completing further production stations. This issue has now been fixed.

An error occurred sending nest requests to an extension when the request contained DXF files. This issue has now been fixed.

Previously, in PowerFab Go, the main mark filter was not applied correctly against completed inspection test records. This issue has now been fixed.

In Shape Maintenance, new dimension options are available with Tee properties for the formats Description, Depth (in.) x Web Thickness (in.) x Flange Width (in.), and Depth (in.) x Web Thickness (in.).