2022i SP2: New features, improvements, and important fixes

Tekla PowerFab
2022i
Tekla PowerFab Tekla PowerFab GO

2022i SP2: New features, improvements, and important fixes

The latest Tekla EPM 2022i service pack is available in Tekla Downloads.

修正リスト

不具合番号 開発分野 説明
EPM-6517 Estimating

In the Estimating IFC import, slots from SDS/2 files are now correctly added as additional labor operations.

EPM-6587 Estimating

Previously, the PRC Cost field did not display correctly for negative quantities. This issue has now been fixed.

EPM-6976 Estimating

The IFC import has been improved to interpret more reliably than before if the profile of a part is a metric or imperial designation.

EPM-4767 Project management

In Project Management, the change order reports now show totals with the number of change orders and the total amount broken out by status.

EPM-6938 Project management

Previously, a "File does not exist" error occurred when emailing a request for information (RFI) or transmittal. This issue has now been fixed.

EPM-7018 Project management

In Project Management, several rendering issues with the Change Order report have now been fixed.

EPM-6658 Production control

Drawings and assemblies on hold are now also highlighted in red for the Main Mark and Drawing # Filter dialog boxes.

EPM-6787 Production control

The following reports have been redesigned in Stimulsoft:

  • Cut List (Ascending)
  • Cut List (Break By Width & Double Spaced)
  • Cut List (Break By Width) w/ LFt, SqFt, Sur. Area
  • Cut List (Wide Carriage) w/ LFt, SqFt, Sur. Area
  • Cut List (Wide Carriage) w/ Instructions
  • Cut List w/ Dimensions
  • Cut List w/ Main Mark
  • Manual Cut List
  • Manual Cut List w/ Dimensions
  • Sequence Report
  • Sequence Report - no Accessories
  • Sequence Report by Material
  • Shop Cut List (Wide Carriage)
  • Shop Cut List w/ Dimensions
EPM-6833 Production control

The following reports have been redesigned in Stimulsoft:

  • Area By Material - No Page Break
  • Assembly Weight Report
  • Completed Station Details
  • Cut List (Ascending)
  • Cut List (Break By Width)
  • Cut List (Break By Width & Double Spaced)
  • Cut List (Break By Width) w/ LFt, SqFt, Sur. Area
  • Cut List (Wide Carriage) w/ LFt, SqFt, Sur. Area
  • Cut List (Wide Carriage) w/ Instructions
  • Cut List w/ Dimensions
  • Cut List w/ Main Mark
  • Manual Cut List
  • Manual Cut List w/ Dimensions
  • Sequence Report
  • Sequence Report - no Accessories
  • Sequence Report by Material
  • Shop Cut List (Wide Carriage)
  • Shop Cut List w/ Dimensions Quality Control Inspection w/ Remarks
  • Quality Control Inspection w/ Remarks
EPM-6860 Production control

When running an inspection, the user currently signed into PowerFab appears in the list of inspectors only if their contact entry in the address book is flagged as an inspector.

EPM-6964 Production control

Previously, when performing a TFS cut, an access violation occurred when tabbing through drops of an external nest. This issue has now been fixed.

EPM-7123 Production control

Previously, in Production Control, the Cut List (Break By Width) w/ LFt, SqFt, Sur. Area and Cut List (Wide Carriage) w/ LFt, SqFt, Sur. Area reports had incorrect totals for the plate SqFt/SqM. This issue has now been fixed.

EPM-6642 Administration

The FabSuite API has been renamed to Tekla PowerFab API and now supports .NET 3.5, 4.0, 4.5.2, 4.6.2, 4.7.2, 4.8 and 6.0.

EPM-6242 Inventory

In Inventory, when hovering the mouse over the Item Type field in the grid, a tooltip now appears to explain the codes.

EPM-7017 Inventory

Previously, transaction history did not pull the correct data for a split piece. This issue has now been fixed.

EPM-6895 Integrations

When the inventory is synchronized with SigmaNest, the weight is now included.

役に立ちましたか?
前へ
次へ