m•connect Circular plate

Tekla Structures
Not version-specific
Tekla Structures
Environment
Not environment-specific

Generally for both S460 and S560

Select two points in the direction on how you wish to place the circular plate. Important here is to set the start point on the left and the direction on the right to get the position in depth of the component correct. The yellow handle symbolizes the start point and the purple handle the direction of the component.

Image
Muermann_7.PNG

Settings for the circular plate

1. Select appropriate size of the circular plate and press load. All values are automatically loaded into dialog.
Image
Muermann_8.PNG

2. You can also select material from database etc under the parameters tab.
3. Type is generated from size and selections made.
4. Only angles between 60-90 degrees are allowed. If another angle is written which isn’t within the marginal, either 60 or 90 degrees is chosen automatically.
È stato utile?