Formati file e software compatibili con Tekla Structures
Nelle tabelle riportate di seguito sono elencate le possibilità di interoperabilità di Tekla Structures.
La lista di formati file compatibili include i formati file possibili per l'importazione e l' esportazione in Tekla Structures.
Le liste di software compatibile includono il software compatibile con Tekla Structures. Alcune delle applicazioni software elencate presentano un link diretto con Tekla Structures. Molti link diretti sono disponibili in Tekla Warehouse.
Formati file compatibili
È possibile importare ed esportare diversi formati in Tekla Structures.
Nella seguente tabella sono elencati molti dei diversi formati che è possibile utilizzare in Tekla Structures per importare ed esportare i dati.
Per utilizzare alcuni formati, è necessario scaricare un'estensione da Tekla Warehouse.
Formato |
Importa |
Esportazione |
---|---|---|
3D image (.obj) |
X |
|
aSa (.TEK) |
Quantità barre d'armatura e geometria di produzione per taglio e piegatura |
|
Formato Autodesk 3DS Max (.3ds) |
X |
|
Autodesk (.dwg) |
Geometria 3D, geometria 2D |
Geometria 3D, geometria 2D, disegni |
Autodesk (.dxf) |
Geometria 3D, geometria 2D |
Geometria 3D, geometria 2D, disegni |
Bentley ISM |
X |
X |
BIM Collaboration format (.bcf) |
X |
X |
File Blender (.blend) |
X |
|
BricsCAD (.ifc) |
X |
X |
BVBS (.abs) |
Quantità di barre d'armatura e geometria di produzione per taglio e piegatura, rete, putrella reticolare |
|
CIS/2 LPM5/LPM6 analitico (.stp,.p21,.step) |
Geometria 3D |
Geometria 3D |
CIS/2 LPM5/LPM6 progetto (.stp,.p21,.step) |
Geometria 3D, attributi
|
Geometria 3D, attributi
|
CIS/2 LPM6 produzione (.stp,.p21,.step) |
Geometria 3D, attributi |
|
CPIxml |
Quantità, dati materiali, dati di stato |
|
COLLADA (.dae) |
X |
|
.csv | Geometria di parte e assemblaggio per la produzione, attributi | |
DSTV (.nc,.stp,.mis) |
Geometria analitica 3D |
Dati parte per la produzione |
EJE |
X |
|
Elematic ELiPLAN, ELiPOS (.eli) |
Stato di produzione e date |
Quantità di elementi e materiali, geometria di produzione per getto, stampa e taglio, stato del progetto e note |
EPC |
X |
|
Fabsuite (.xml) |
X |
X |
FabTrol Kiss (.kss) |
Dati modello, attributi |
|
FabTrol MIS Xml (.xml) |
X |
X |
Filmbox (.fbx) |
X |
|
GL Transmission Format (.glft) |
X |
|
File High Level Interface (.hli) |
X |
X |
HMS (.sot) |
Quantità di elementi e materiali, geometria di produzione per getto, stampa, stato del progetto e note |
|
IBB Betsy (.fa, .f, .ev) |
Quantità di elementi e materiali |
|
IFC2x2 (.ifc) ** |
X |
|
IFC2x3 (.ifc) ** |
Modello BIM, geometria 3D, geometria 2D, attributi |
Modello BIM, geometria 3D, geometria 2D, attributi |
IFC4 (.ifc) ** |
X |
X |
IFCXML 2X3 (.ifcXML) ** |
X |
X |
IFCZIP 2x3 (.ifcZIP) ** |
X |
X |
Initial Graphics Exchange Specification (IGES) (.iges,.igs) |
X |
X |
LandXML (.xml) |
X |
|
Microsoft Project (.xml) |
X |
X |
Microstation (.dgn) |
Geometria 3D |
Geometria 3D |
Oracle Primavera P6 (.xml) |
X |
X |
Plant Design Management System (.pdms) |
X |
|
Polygon File Format (.ply) |
X |
|
SAP, Oracle, ODBC e così via. |
X * |
X * |
SketchUp (.skp) |
Geometria 3D |
Geometria 3D |
Staad ASCII (.std) |
X |
X |
Steel Detailing Neutral Format (.sdf,.sdnf, .dat) |
Geometria 3D |
Geometria 3D |
Steel12000 |
X |
|
STEP AP203 (.stp,.step) |
Geometria 3D |
|
STEP AP214 (.stp,.step) |
Geometria 3D |
Geometria 3D |
StruM.I.S |
X |
Geometria 3D, geometria 2D, disegni |
Tekla Collaboration (.tczip) |
X |
X |
Tekla EPM (ad esempio, Fabsuite) | Dati modello, attributi, disegni, file NC | |
Tekla-FabTrol Report (.xsr) |
X |
|
Tekla Structural Designer neutrale (.cxl) |
Modello di analisi e progetto |
Modello di analisi e progetto |
Tekla Structures forme (.tsc) |
X |
X |
Trimble Field Link (.tfl) |
X |
X |
Trimble LM80 (.txt,.cnx) |
X |
X |
TubeNC (.xml) |
Geometria parte per la produzione |
|
Unitechnik (.uni, .cam) |
Quantità di elementi e materiali, informazioni sul processo, geometria di produzione per cassaforma prefabbricata, stampa, rete-saldatura |
* Tekla OpenAPI utilizzato
**Per una lista di applicazioni IFC certificate da buildingSMART international, vedere Certified Software.
Software Trimble compatibile
Nella seguente tabella è riportato il software Trimble compatibile con Tekla Structures.
Prodotto Trimble |
Importazione in Tekla Structures |
Esportazione da Tekla Structures |
---|---|---|
3D+ |
Autodesk (.dwg) Autodesk (.dxf) Steel Detailing Neutral Format (.sdf, .sdnf) |
Autodesk (.dwg) Autodesk (.dxf) |
DuctDesigner 3D |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
PipeDesigner 3D |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
Plancal |
IFC2X3 (.ifc) Autodesk (.dwg) Autodesk (.dxf) |
IFC2X3 (.ifc) Autodesk (.dwg) Autodesk (.dxf) |
SketchUp Make |
SketchUp (.skp) |
SketchUp (.skp) |
SketchUp Pro |
SketchUp (.skp) Autodesk (.dwg) Autodesk (.dxf) |
SketchUp (.skp) Autodesk (.dwg) Autodesk (.dxf) |
Tekla Field3D |
IFC2X3 (.ifc) |
|
Tekla Civil |
Direct Link LandXML (.xml) |
Direct Link IFC2X3 (.ifc) |
Tekla Collaboration |
File Tekla Collaboration ( .tczip) |
File Tekla Collaboration ( .tczip) |
Tekla Structural Designer |
Neutral XML (.cxl) |
Neutral XML (.cxl) |
Trimble Business Centre |
LandXML (.xml) |
|
Trimble Connect |
Direct Link IFC2X3 (.ifc) |
Direct Link IFC2X3 (.ifc) |
Trimble Field Link |
Trimble Field Link (.tfl) |
Trimble Field Link (.tfl) |
Trimble LM80 Desktop |
Autodesk (.dxf) LM80 (.cnx, .txt) |
Autodesk (.dxf) LM80 (.cnx, .txt) |
Vico Office |
Direct Link |
|
Autodesk (.dwg) |
||
Autodesk (.dxf) |
||
IFC2X3 (.ifc) |
||
IfcXML 2X3 (.xml) |
IfcXML 2X3 (.xml) |
|
Microstation (.dgn) |
||
Foglio di calcolo Excel (.xls) |
Foglio di calcolo Excel (.xls) |
|
Vico Schedule Planner |
Direct Link .xml |
Direct Link .xml |
Software compatibile con i link diretti
Nella seguente tabella è riportato il software con un link diretto con Tekla Structures per importare ed esportare i dati.
Molti link diretti sono disponibili in Tekla Warehouse.
Nella tabella sono elencati anche i formati file che possono essere utilizzati nel caso in cui il link diretto non sia possibile.
Prodotto |
Azienda |
Importazione in Tekla Structures |
Esportazione da Tekla Structures |
---|---|---|---|
ADConX |
ADConX |
Direct Link |
|
AxisVM |
Inter-CAD Kft. |
Direct Link |
Direct Link IFC2X3 (.ifc) |
BeamMaster |
AGT |
Direct Link |
|
Bentley Architecture |
Bentley |
Direct Link (ISM) |
Direct Link (ISM) |
Autodesk (.dwg) |
Autodesk (.dwg) |
||
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
Microstation (.dgn) |
Microstation (.dgn) |
||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
Bentley Structural |
Bentley |
Direct Link (ISM) |
Direct Link (ISM) |
Autodesk (.dwg) |
Autodesk (.dwg) |
||
Autodesk (.dxf) |
Autodesk (.dxf) |
||
CIS/2 LPM6 progetto (.stp, .p21, .step) |
|||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
Microstation (.dgn) |
Microstation (.dgn) |
||
Steel Detailing Neutral Format (.sdf, .sdnf) |
|||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
BricsCAD |
Bricsys |
.ifc |
.ifc |
CYPECAD |
Cype |
Direct Link |
|
Diamonds |
Buildsoft |
Direct Link |
Direct Link |
Fabsuite |
Fabsuite |
Direct Link KISS (.kss) |
Direct Link KISS (.kss) |
FEM Design |
StruSoft |
Direct Link IFC2X3 (.ifc) |
Direct Link IFC2X3 (.ifc) |
IDEA StatiCa |
IDEA StatiCa |
Direct Link |
|
Joints For Tekla |
Progetto Archimede |
Direct Link |
|
Lantek |
Lantek |
Direct Link |
Direct Link |
LIRA-SAPR |
LIRA SAPR |
Direct Link (Default, Russia) |
Direct Link (Default, Russia) |
LIRA 10 |
LIRA SOFT |
Direct Link (Russia) |
Direct Link (Russia) |
Meridian Prolog |
Trimble |
Direct Link |
|
Midas Gen |
MIDAS |
Direct Link |
Direct Link |
ModeSt |
Tecnisoft |
Direct Link |
Direct Link |
PEMA WeldControl |
Pemamek |
Direct Link |
|
Pipelabo |
Maruhide |
Direct Link |
|
PowerConnect |
Buildsoft |
Direct Link |
Direct Link |
PowerFrame |
Buildsoft |
Direct Link |
Direct Link |
ProCAM |
HGG |
Direct Link |
Direct Link |
Pro-Fit |
Zeman |
Direct Link |
|
Qnect |
Qnect |
Direct Link |
|
Raptor |
Peddinghaus |
Direct Link |
|
RFEM |
Dlubal |
Direct Link CIS/2 LPM6 analitico (.stp, .p21, .step) IFC2X3 (.ifc) |
Direct Link CIS/2 LPM6 analitico (.stp, .p21, .step) IFC2X3 (.ifc) |
RISA 3D (Suite) |
Risa Technology |
Direct Link (mercato USA) |
Direct Link (mercato USA) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
CIS/2 LPM6 analitico (.stp, .p21, .step) |
CIS/2 LPM6 analitico (.stp, .p21, .step) |
||
CIS/2 LPM6 progetto (.stp, .p21, .step) |
CIS/2 LPM6 progetto (.stp, .p21, .step) |
||
Steel Detailing Neutral Format (.sdf, .sdnf) |
|||
RisaConnection |
Risa Technology |
Direct Link (Stati Uniti, Regno Unito, Germania, Svezia, Norvegia, Cina, India, Australia) |
Direct Link (Stati Uniti, Regno Unito, Germania, Svezia, Norvegia, Cina, India, Australia) |
Robot Millenium |
Autodesk |
Direct Link CIS/2 LPM6 analitico (.stp, .p21, .step) CIS/2 LPM6 progetto (.stp, .p21, .step) |
Direct Link CIS/2 LPM6 analitico (.stp, .p21, .step) CIS/2 LPM6 progetto (.stp, .p21, .step) |
RSTAB |
Dlubal |
Direct Link CIS/2 LPM6 analitico (.stp, .p21, .step) IFC2X3 (.ifc) |
Direct Link CIS/2 LPM6 analitico (.stp, .p21, .step) IFC2X3 (.ifc) |
SAP2000 |
Computers & Structures, Inc. |
Direct Link |
Direct Link |
Direct Link (ISM) |
Direct Link (ISM) |
||
Autodesk (.dwg) |
Autodesk (.dwg) |
||
Autodesk (.dxf) |
Autodesk (.dxf) |
||
CIS/2 LPM6 analitico (.stp, .p21, .step) |
CIS/2 LPM6 analitico (.stp, .p21, .step) |
||
SCIA |
Nemetschek |
Direct Link |
Direct Link |
Autodesk (.dwg) |
Autodesk (.dwg) |
||
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
Steel Detailing Neutral Format (.sdf, .sdnf) |
Steel Detailing Neutral Format (.sdf, .sdnf) |
||
S-FRAME |
S-FRAME Software Inc. |
Direct Link Autodesk (.dxf) |
Direct Link Autodesk (.dxf) |
Sicam |
Controlled Automation |
Direct Link |
|
STAAD.Pro |
Bentley |
Direct Link |
Direct Link |
Autodesk (.dwg) |
Autodesk (.dwg) |
||
Autodesk (.dxf) |
Autodesk (.dxf) |
||
CIS/2 LPM6 analitico (.stp, .p21, .step) |
CIS/2 LPM6 analitico (.stp, .p21, .step) |
||
File Staad ASCII (.std) |
|||
Steel Detailing Neutral Format (.sdf, .sdnf) |
|||
ISM |
ISM |
||
Steel Projects PLM |
Steel Projects |
Direct Link |
Direct Link |
StruM.I.S |
StruM.I.S |
Direct Link |
BSWX (.bswx) |
Vacam |
Voortman |
Direct Link |
Software compatibile
Nella seguente tabella sono elencate le applicazioni software compatibili con il software di Tekla Structures e i formati che è possibile importare ed esportare daTekla Structures.
Per una lista di applicazioni IFC certificate da buildingSMART international, vedere Certified Software.
Per maggiori informazioni sui diversi strumenti di importazione ed esportazione, vedere Importazione ed esportazione da Tekla Structures.
Prodotto |
Azienda |
Importazione in Tekla Structures |
Esportazione da Tekla Structures |
---|---|---|---|
3ds Max |
Autodesk |
Autodesk (.dwg) Autodesk (.dxf) IGES (.iges, .igs) |
Autodesk (.dwg) Autodesk (.dxf) |
3ds Max Design/VIZ |
Autodesk |
Autodesk (.dwg) Autodesk (.dxf) IGES (.iges, .igs) |
Autodesk (.dwg) Autodesk (.dxf) |
A+ Software | ArmaPlus |
BVBS (.abs) Soulé (.xml) aSa (.TEK) |
|
Adapt |
Adapt Corporation |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
Advanced Steel, Advanced Design/Engineering |
Autodesk |
CIS/2 LPM5 analitico (.stp, .p21, .step) IFC2X3 (.ifc) Steel Detailing Neutral Format (.sdf, .sdnf) |
CIS/2 LPM5 analitico (.stp, .p21, .step) IFC2X3 (.ifc) Steel Detailing Neutral Format (.sdf, .sdnf) |
Allplan/Planbar |
Nemetschek |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
Microstation (.dgn) |
Microstation (.dgn) |
||
ANSYS |
ANSYS |
IGES (.iges, .igs) |
IGES (.iges, .igs) |
ArchiCAD |
Graphisoft / Nemetschek |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
IFCXML 2X3 (.xml) |
IFCXML 2X3 (.xml) |
||
IFCZIP (.ifczip) |
IFCZIP (.ifczip) |
||
Coordinated View v1 |
Coordinated View v1 |
||
ArchonCAD |
ArchonCAD Ltd. |
Autodesk (.dwg) Autodesk (.dxf) IGES (.iges, .igs) |
Autodesk (.dwg) Autodesk (.dxf) |
Armaor |
Ariadis |
BVBS (.abs) |
|
Artube |
Adige |
STEP (.stp, .step) IGES (.iges, .igs) IFC (.ifc) |
|
aSa Rebar |
Applied Systems Associates Inc |
File aSa Rebar (.TEK) |
|
ASI |
Applied Science International LLC |
File ASCII Staad (.std) |
|
AutoCAD |
Autodesk |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
AutoCAD Architecture |
Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
IGES (.iges, .igs) |
Microstation (.dgn) |
||
AutoCAD Civil 3D |
Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
Microstation (.dgn) |
|||
File LandXML (.xml) |
|||
AutoCAD MEP |
Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
Microstation (.dgn) |
|||
AutoPLANT |
Bentley |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
AutoVue |
Oracle |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) STEP AP214 (.stp,.step) |
|
Aveva E3D |
AVEVA |
Microstation (.dgn) Steel Detailing Neutral Format (.sdf,.sdnf, .dat) File Tekla Collaboration basati su .ifc (.tczip) |
Microstation (.dgn) Steel Detailing Neutral Format (.sdf,.sdnf, .dat) File Tekla Collaboration basati su .ifc (.tczip) |
AviCAD |
Progress/EBAWE |
Unitechnik (.cam), BVBS (.abs) |
|
Bentley Building Electrical Systems |
Bentley |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
Microstation (.dgn) |
Microstation (.dgn) |
||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
Bentley Building Mechanical Systems |
Bentley |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
Microstation (.dgn) |
Microstation (.dgn) |
||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
Bentley Inroads |
Bentley |
File LandXML (.xml) |
|
Betsy |
IBB – Consultants & Engineers |
Betsy (.fa), Betsy (.f), Betsy (.ev) |
|
Cadmatic |
Cadmatic |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
CADmep+ |
MAP Software / Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
IFCXML 2X3 (.xml) |
IFCXML 2X3 (.xml) |
||
IFCZip (.ifczip) |
IFCZip (.ifczip) |
||
CADPipe |
AEC Design Group |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
CADWorx Plant |
Intergraph / Hexagon |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
CIS/2 LPM6 analitico (.stp, .p21, .step) |
CIS/2 LPM6 analitico (.stp, .p21, .step) |
||
CIS/2 LPM6 progetto (.stp, .p21, .step) |
CIS/2 LPM6 progetto (.stp, .p21, .step) |
||
CAESAR II |
Intergraph / Hexagon |
Autodesk (.dwg) |
Autodesk (.dwg) |
CATIA |
Dassault |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
|||
IGES (.iges, .igs) |
|||
Steel Detailing Neutral Format (.sdf, .sdnf) |
Steel Detailing Neutral Format (.sdf, .sdnf) |
||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
Concrete Pro |
LAP Laser GmbH |
Autodesk (.dwg) Autodesk (.dxf) Unitechnik (.cam) |
|
ConSteel |
ConSteel Solutions Limited |
ASCII |
|
Corobs |
Müller Opladen |
TubeNC (.xml) |
|
Daystar Software |
Daystar Software Inc. |
Autodesk (.dxf) Steel Detailing Neutral Format (.sdf, .sdnf) |
Autodesk (.dxf) Steel Detailing Neutral Format (.sdf, .sdnf) |
DDS-CAD |
DDS |
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
Digital Project |
Gehry Technologies |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IGES (.iges, .igs) |
|||
Steel Detailing Neutral Format (.sdf, .sdnf) |
Steel Detailing Neutral Format (.sdf, .sdnf) |
||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
ebos |
Progress/EBAWE |
Unitechnik (.cam) |
|
elcoCAD |
Hannappel SOFTWAR E GmbH |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
ELiPLAN |
Elematic |
ELiPLAN ( |
ELiPLAN (.eli) |
ELiPOS |
Elematic |
ELiPLAN (.eli) |
|
EliteCAD |
Messerli Informatik |
IFC2X3 (.ifc) Autodesk (.dxf) |
IFC2X3 (.ifc) Autodesk (.dxf) |
ETABS |
Computers &Structures, Inc. |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
CIS/2 LPM6 analitico (.stp, .p21, .step) |
CIS/2 LPM6 analitico (.stp, .p21, .step) |
||
Steel Detailing Neutral Format (.sdf, .sdnf) |
Steel Detailing Neutral Format (.sdf, .sdnf) |
||
STEP AP214 (.stp,.step) |
|||
FabPro Pipe |
UHP Process Piping Inc. |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
FabTrol MRP |
FabTrol |
FabTrol MIS XML (.xml) |
FabTrol MIS XML (.xml) File FabTrol KISS (.kss) Tekla-FabTrol Report (.xsr) |
FactoryCAD |
Siemens |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
FelixCAD |
SofTec |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
Floor Pro |
Adapt Corporation |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
FormZ |
AutoDesSys, Inc. |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IGES (.iges, .igs) |
|||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
FXTube |
Mazak |
STEP (.stp, .step) IGES (.iges, .igs) IFC (.ifc) |
|
GSA |
Oasys |
CIS/2 LPM6 analitico (.stp, .p21, .step) |
CIS/2 LPM6 analitico (.stp, .p21, .step) |
GT Strudl |
GT Strudl |
Autodesk (.dxf) CIS/2 LPM6 analitico (.stp, .p21, .step) |
Autodesk (.dxf) |
HMS |
HMS |
HMS (.sot) |
|
HOOPS |
Tech Soft 3D |
Autodesk (.dwg) Autodesk (.dxf) |
|
Inventor |
Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IGES (.iges, .igs) |
|||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
IronCAD |
IronCAD |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IGES (.iges, .igs) |
|||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
iTWO |
RIB Software AG |
CPIxml (.xml) |
|
KeyCreator |
Kubotek |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IGES (.iges, .igs) |
|||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
LEIT2000 |
SAA |
Unitechnik (.cam) |
|
LP-System |
Lennerts & Partner |
BVBS (.abs) |
|
MagiCAD |
Progman |
Autodesk (.dwg) IFC2X3 (.ifc) |
Autodesk (.dwg) IFC2X3 (.ifc) |
MasterFrame |
MasterSeries |
DSTV96 (.nc, .stp, .mis) |
DSTV96 (.nc, .stp, .mis) |
Maxon Cinema 4D |
Nemetschek |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
Maya |
Autodesk |
Autodesk (.dxf) IGES (.iges, .igs) |
STEP AP214 (.stp,.step) Autodesk Maya Autodesk (.dxf) |
Mesh Welding |
EVG (Filzmoser) |
Unitechnik (.cam) BVBS (.abs) |
|
Mesh Welding |
A.W.M. |
Unitechnik (.cam) |
|
Mesh Welding |
Progress / EBAWE |
Unitechnik (.cam) |
|
Microsoft Office Project |
Microsoft |
Project (.xml) |
Project (.xml) |
Microstran |
Engineering Systems Pty Limited |
Autodesk (.dxf) |
Autodesk (.dxf) |
Microstation |
Bentley |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IGES (.iges, .igs) |
IGES (.iges, .igs) |
||
Microstation (.dgn) |
Microstation (.dgn) |
||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
Multiframe |
Daystar Software Inc. |
Autodesk (.dxf) Steel Detailing Neutral Format (.sdf, .sdnf) |
Autodesk (.dxf) Steel Detailing Neutral Format (.sdf, .sdnf) |
Nastran |
MSC Software Corporation |
Autodesk (.dwg) IGES (.iges, .igs) |
Autodesk (.dwg) IGES (.iges, .igs) |
NavisWorks |
Autodesk |
Autodesk (.dwg) Autodesk (.dxf) CIS/2 LPM6 analitico (.stp, .p21, .step) IFC2X3 (.ifc) Microstation (.dgn) |
|
NX (Unigraph) |
Siemens |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IGES (.iges, .igs) |
|||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
PDMS |
AVEVA |
Microstation (.dgn) Steel Detailing Neutral Format (.sdf,.sdnf, .dat) File Tekla Collaboration ( .tczip) |
Microstation (.dgn) Steel Detailing Neutral Format (.sdf,.sdnf, .dat) File Tekla Collaboration ( .tczip) |
PDS |
Intergraph / Hexagon |
Microstation (.dgn) Steel Detailing Neutral Format (.dat) |
Microstation (.dgn) Steel Detailing Neutral Format (.dat) |
Peikko Designer |
Peikko Group Corporation |
Plug-ins |
Plug-ins |
PipeCAD |
Mc4 Software |
Autodesk (.dxf) |
Autodesk (.dxf) |
Plant-4D |
CEA Technology |
Autodesk (.dwg) Autodesk (.dxf) Microstation (.dgn) |
|
PRIAMOS |
GTSdata |
CPIxml (.xml) Unitechnik (.cam) |
|
Primavera |
Oracle |
P6 (.xml) |
P6 (.xml) |
ProStructures |
Bentley |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
|||
Microstation (.dgn) |
|||
Steel Detailing Neutral Format (.sdf, .sdnf) |
Steel Detailing Neutral Format (.sdf, .sdnf) |
||
ISM |
ISM |
||
Pro/Engineer |
PTC |
IGES (.iges, .igs) STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
ProFit |
Progress/EBAWE |
BVBS (.abs) |
|
Prokon |
Prokon |
CIS/2 LPM6 analitico (.stp, .p21, .step) |
CIS/2 LPM6 analitico (.stp, .p21, .step) |
PythonX |
Lincoln Electric |
DSTV |
|
RAM (CAD Studio) |
Bentley |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
CIS/2 LPM6 analitico (.stp, .p21, .step) |
CIS/2 LPM6 analitico (.stp, .p21, .step) |
||
CIS/2 LPM6 progetto (.stp, .p21, .step) |
CIS/2 LPM6 progetto (.stp, .p21, .step) |
||
ISM |
ISM |
||
Revit Architecture/MEP |
Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
Microstation (.dgn) |
Microstation (.dgn) |
||
File Tekla Collaboration ( .tczip) |
|||
Revit Structure |
Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
CIS/2 LPM6 progetto (.stp, .p21, .step) |
CIS/2 LPM6 progetto (.stp, .p21, .step) |
||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
Microstation (.dgn) |
Microstation (.dgn) |
||
File Tekla Collaboration ( .tczip) |
|||
Rhinoceros |
McNeel North America |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IGES (.iges, .igs) |
|||
Microstation (.dgn) |
Microstation (.dgn) |
||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
Geometry Gym link |
Geometry Gym link |
||
RinasWeld |
Kranendonk |
IFC2X3 (.ifc) | |
SACS |
Engineering Dynamics Inc. |
Autodesk (.dxf) Steel Detailing Neutral Format (.sdnf) |
|
SAFE |
Computers & Structures, Inc. |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
CIS/2 LPM6 analitico (.stp, .p21, .step) |
CIS/2 LPM6 analitico (.stp, .p21, .step) |
||
IGES (.iges, .igs) |
|||
SAM |
Bestech Limited |
Autodesk (.dxf) |
Autodesk (.dxf) |
Schnell Software |
Schnell Software |
BVBS (.abs) Unitechnik (rebar/mesh) |
|
SDS/2 |
Design Data |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
CIS/2 LPM6 analitico (.stp, .p21, .step) |
CIS/2 LPM6 analitico (.stp, .p21, .step) |
||
CIS/2 LPM6 progetto (.stp, .p21, .step) |
CIS/2 LPM6 progetto (.stp, .p21, .step) |
||
CIS/2 LPM6 produzione (.stp,.p21,.step) |
|||
Microstation (.dgn) |
Microstation (.dgn) |
||
Smart 3D (SmartPlant / SmartMarine) |
Intergraph / Hexagon |
CIS/2 LPM6 analitico (.stp, .p21, .step) |
CIS/2 LPM6 analitico (.stp, .p21, .step) |
CIS/2 LPM6 progetto (.stp, .p21, .step) |
CIS/2 LPM6 progetto (.stp, .p21, .step) |
||
Microstation (.dgn) |
Microstation (.dgn) |
||
IFC2X3 (.ifc) con SmartPlant 3D |
|||
Solibri Model Checker/Model Viewer |
Solibri |
IFC2X3 (.ifc) |
|
SolidEdge |
Siemens |
Autodesk (.dxf) |
Autodesk (.dxf) |
Microstation (.dgn) |
Microstation (.dgn) |
||
IGES (.iges, .igs) |
|||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
SolidWorks |
Dassault |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IGES (.iges, .igs) |
|||
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
Soulé |
Soulé Software Inc. |
.xml BVBS (.abs) |
|
SPACE GASS |
SPACE GASS |
CIS/2 LPM6 analitico (.stp, .p21, .step) |
CIS/2 LPM6 analitico (.stp, .p21, .step) |
SpaceClaim |
SpaceClaim Co. |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
IGES (.iges, .igs) |
|||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
Steel Smart System |
Applied Science International, LLC |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
StructureWorks |
StructureWorks LLC. |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
|||
IGES (.iges, .igs) |
|||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
TurboCAD |
IMSI Design |
Autodesk (.dwg) |
Autodesk (.dwg) |
Autodesk (.dxf) |
Autodesk (.dxf) |
||
Microstation (.dgn) |
Microstation (.dgn) |
||
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp,.step) |
||
UniCAM |
Unitechnik |
Unitechnik (.cam, .uni) |
|
Unigraphics |
Siemens PLM Software |
IGES (.iges, .igs) |
|
Vernon |
Lincoln Electric |
TubeNC (.xml) |
|
VectorWorks |
Nemetschek |
IFC2X3 (.ifc) IGES (.iges, .igs) |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
Volo View |
Autodesk |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |