Review slab and mat design

Review slab and mat design status

On the Review ribbon, in the Slab/Mat Design group, click Status.

Color codes display the design status of each slab and mat.

Tekla Structural Designer uses the following classifications:

Status	Description
Pass	The slab item has passed all design checks.
Fail	The slab item has failed one or more design checks.
Warning	Although the slab item has passed the design checks, one or more warnings have been issued. Review the warnings before deciding if you need to take further action.
Error	The slab item currently cannot be designed because an error has occurred.
Beyond Scope	The slab item cannot be designed because its design is beyond the scope of Tekla Structural Designer.
Unknown	The slab item has not been designed.

Open a view and change the view regime to Review View.
On the Review ribbon, in the Slab/Mat Design group, click Ratio.
Color codes display the design ratio of each slab item. N/A is assigned to members that have no ratio or whose ration is smaller than the lowest band. N/A also indicates slab items that are either beyond scope or have yet to be designed.

In the list that appears, select one of the following filtering options according to your needs:

Filter	Description
Overall	The governing Top X, Top Y, Bottom X, Bottom Y, or span depth result is displayed.
Reinforcement	The governing Top X, Top Y, Bottom X, or Bottom Y result is displayed.
Top X	The result is only displayed for top reinforcement in the X direction.
Top Y	The result is only displayed for top reinforcement in the Y direction.
Bottom X	The result is only displayed for bottom reinforcement in the X direction.
Bottom Y	The result is only displayed for bottom reinforcement in the Y direction.
Span Depth	The span to depth result is displayed.
Bearing Pressure	The bearing pressure result is displayed.

See also

Design review filters