Copy material grades

Tekla Structural Designer
2020
Tekla Structural Designer

Copy material grades

If necessary, you can graphically review the material grade applied to the members in your model. Tekla Structural Designer also allows you to copy the grade of one member to another member with the same material type . For more information, see the following paragraphs.

Restriction:

You can only copy material grades to and from steel, cold formed, cold rolled, concrete, or timber members.

  1. Open a view and change the view regime to Review View.
  2. On the Review tab, click Show/Alter State.
  3. Go to the Properties window.
  4. In the Attribute list, select Material Grade.
  5. In Material Type, select the desired material type.
    Tip:

    If necessary, use a characteristic filter to reduce the elements displayed in the Review View.

  6. Set Mode to Copy.
  7. Click the element whose grade you want to copy.
  8. Click the elements to which you want to copy the grade.

    The material grade is copied to the selected elements.

È stato utile?
Precedente
Successivo