Compare the materials in a production control job and a combining job

Tekla PowerFab
Modificato: 8 Mar 2024
2024i
Tekla PowerFab Tekla PowerFab GO

Compare the materials in a production control job and a combining job

You can view if there are differences between the production control job materials and a pre-purchased material list in the Combining module by using the Compare to Combining Job command.

  1. In the Select Production Control Job dialog box, open a job and click the Production Control ribbon tab.
  2. On the menu, select Review > Compare to Combining Job.
  3. In the Select Combining Job dialog box, double-click the combining job that you want to use in the comparison.

    The Compare to Combining Job dialog box opens, displaying the similarities and differences between the production control job and the combining job.

    Matching items in the production control job and the combining job are highlighted with green.

    Items that do not match in the combining job and the production control job are highlighted with red.

  4. To adjust which comparison results are shown, do any of the following:
    • In the CMB Material Smaller than PDC Material section, define how much smaller the combining job items can be compared to the production control items without being considered critically different.
    • In the CMB Material Larger than PDC Material section, define how much larger the combining job items can be compared to the production control items without being considered critically different.
    • To only show items that differ in the production control job and the combining job, select the Only Show Differences checkbox.
    • To only show items that are greater than the maximum acceptable length and width differences set at the top of the Compare to Combining Job dialog box, select the Only Show Critical Differences checkbox.

    To update the comparison results, click Refresh.

  5. To view the comparison results as a report, click View Report.

    The comparison report opens in Tekla PowerFab Report Viewer.

È stato utile?
Precedente
Successivo