Add inventory to load in Tekla PowerFab Go

Tekla PowerFab
2024
Tekla PowerFab Tekla PowerFab GO

Add inventory to load in Tekla PowerFab Go

You can add items to a load directly from inventory in Tekla PowerFab Go.

To add inventory to a load, do either of the following:
  • Add from Inventory.
    1. Open Inventory.
    2. Tap Load.

    3. Select a line or lines of inventory to load.

      The Load No. list displays all the unshipped loads for the job.

    4. Select the load number.
    5. Tap Load.

      The inventory is assigned to the load and immediately taken from stock.

  • Add from shipping calendar.
    1. In the shipping calendar, select a load and click the ellipsis icon ( ) to display the menu.
    2. Select Load details

      The Edit load dialog box opens.

    3. Tap + Inventory.

      You can view the unreserved inventory and the inventory reserved to the selected job that is not combined.

    4. Select a line or lines of inventory to load.

      Modify the quantity of items as needed.

    5. Tap Load.

      The inventory is assigned to the load and taken from stock.

    6. Close Inventory.

      You can view the items in the Additional section on the Material tab.

Note: If you delete inventory from the load, you are prompted to confirm if you wish to perform a reverse take from stock.
È stato utile?
Precedente
Successivo