When changes have been made to a material dimension in the combining material list, use the Recombine Size command to recombine the dimension. Note that you need to have the Combining Run Results dialog box open.

1. In the Combined navigation tree, click the + sign, and select a material dimension.

   Only the selected material dimension is shown.

2. Click the Combining Run ribbon tab.
3. On the menu, select Recombine Size.

   A confirmation dialog box appears, asking if you want to recombine the selected dimension.

4. In the first confirmation dialog box, click Yes to recombine the selected dimension.
5. In the second confirmation dialog box, click Yes to save the previous combining run or No to recombine materials without saving the combining run.
   Tip: You can save the combining run to view it later and compare it with another combining run. To do so, click Save Combining Run at the bottom of the Combining Run Results dialog box. No cut lists are generated when you save the combining run.

   To view the results, open the Select Combining Run dialog box by clicking the Combining/Estimating/Production Control ribbon tab and selecting Combine.