You can split shapes to other shapes, particularly wideflange beams to wideflange tees.
Allow a shape to be split
- In the Shape / Grade / Size Maintenance dialog box, click the Shape / Grade / Size Maintenance ribbon tab.
- On the menu, select Shape Maintenance.
In the shape list of the Shape Maintenance dialog
box, select a shape that you want to split.
For example, select W Wideflange Beams to be split to WT Wideflange Tees.
Ensure that the Allow Splitting check the box is
Note that the Allow Splitting option is available for all linear shapes.
- Click Save Shape and OK.
Create a split configuration
- In the Shape / Grade / Size Maintenance dialog box, select, for example, the W shape.
On the right, open the
The Splits tab is available only for shapes that have the Allow Splitting option selected.
Most of the typical W shapes are already set to be split evenly to WT. If you select different dimensions, you can see under Description the WT sizes that the W shape has been configured to split to.
To create additional split
configurations, click Add.
In the Split Configuration dialog box, create an Equal Split or an Unequal Split. You can add shapes from what is already in Shape / Grade / Size Maintenance, or add new sizes for the selected shape.
Note that the Split Configuration dialog box allows any linear shape to be assigned and does not limit selection to only logical splits.
- Click Save.
Combining setup for split tees
In the Combining Setup dialog box for each module, under Mult Settings - Linear Material there is an option Allow Split T’s.
Example: Combine WTs to W in a requisition
A requisition has several WT5x15s that need to be cut from W10x30s.
Run a combine on the WTs. You will notice that as a result you have close to 80’ of linear material.
Switch to Manual Combine Mode.
Add a 40’ W10x30.
Note that the W10 is marked as Combined (C) even though it does not have any parts assigned to it yet.
Right-click the W10x30 and select Split Selected.
The Split Package dialog box shows which parts are available to be split from the selected material.
There are 2 tabs, one for each WT that is being split from the W.
On the first tab, move parts from the Not Included column to the Included column and vice versa.
Use the > button for a single item, the >> button for all items, or the Qty> button to move just the entered Quantity to Add: of the selected item.
A red message will be displayed if you exceed the length of the selected material. When you are near the limit, changing Quantity to Add: to 1 and using the Qty> and Qty< buttons can help get the most out of the material.
Parts to combine to Result 1:
Parts to combine to Result 2:
When the split package is ready, click Add to complete the combining.
Click Split Details at the bottom right to view and modify the split package.
Perform a split
Once the material to be split is received to Inventory, there are a few options for further processing.
In Inventory, find the piece that has been combined to.
For example, a W10x30 in the above example.
Instead of a C for Combined, a T is displayed to indicate that this item will be split.
Click Split Details to open the Split Package dialog box.
There are additional options to perform the split, or to do a Take From Stock. You can use the other options to add or to remove parts and thus modify the combining.
If you click Perform Split:
The stock material will be split to Result 1 and Result 2 materials, and those will be added to the inventory with their associated parts. The split materials can be processed individually.
If you click TFS:
For each split Result you can select which parts to TFS, and modify the drop length and locations and update piece tracking data.
Create a split package when combining
In the example below, the first WT is combined to an existing tee in inventory, and the others show Warehouse-T under Source to show that they will be Split From: the shape shown in the middle of the window.
Note that if the WT or other split shape is set up in your Pricing Maintenance as available from your supplier, you will need to remove the shape in if you want to combine to splittable material. You will need to then recombine in .
When doing a combining run, you can combine both to WTs (or other already split shapes) that you have in Inventory, and to splittable shapes.