Turning Vanes
2021
Tekla Structures
2020
Tekla Structures
Environment
United States (Imperial)
United States (Metric)
CATALOG NAME: Turning Vanes
TYPE: PART
TurningVanes applies vanes to a ductwork model based on a two-click input. These can be used in a horizontal or vertical condition.
Objects created:
Turning vanes are inserted base on a two input selection.
On the left, the vanes are shown with optional extended legs.
These leg lengths are adjustable.
Turning vanes are inserted base on a two input selection.
On the left, the vanes are shown without optional extended legs.
Part identification key:
TYPE: PART
TurningVanes applies vanes to a ductwork model based on a two-click input. These can be used in a horizontal or vertical condition.
Objects created:
- Curved turning vane plate
- Leg extensions (optional)
- Last corner plate (optional)
Use for:
Image
Turning vanes are inserted base on a two input selection.
On the left, the vanes are shown with optional extended legs.
These leg lengths are adjustable.
Image
Turning vanes are inserted base on a two input selection.
On the left, the vanes are shown without optional extended legs.
Selection order:
1. Inner corner
2. Outer corner
The connection is created automatically when the second point is selected.
Image
Part identification key:
Image
| Option | Part |
Image
| Turning vane |
Image
| Legs |
Image
| Last vane |
Starting in v21.1, the above Custom Component is available in all US Environment Model Templates
- CIP-Rebar Detailing (hidden)
- Engineering*
- Precast Detailing (hidden)
- Steel Detailing (hidden)