Safety Components
2021
Tekla Structures
2020
Tekla Structures
Environment
United States (Imperial)
United States (Metric)
CATALOG NAME: Beam Safety; Column Safety
Beam Safety
TYPE: DETAIL
This Custom Component will create safety cable holes in a beam's flanges.
Picking order:
1. Select the Beam
2. Pick the end point (either start or end) of beam.
There is an option to choose which side of the web the holes are located and a second option that lets you decide if the holes are located off the edge of the flange or from the centerline of the beam.
Column Safety - Back to top
TYPE: DETAIL
This Custom Component will create safety cable holes in a column's web and/or flanges.
Picking order:
1. Select the Column
2. Pick the point at the top of the steel
Web Holes
There is one option to choose whether or not to include holes in the web. A second option to choose which side of the column centerline the web holes are located. And a third option lets you decide if the holes are located from the centerline of the beam or off the K distance (top/edge of the T distance).
Flange Holes
There is one option to choose whether or not to include holes in flange A. A second option to choose whether or not to include holes in flange C. A third option to choose which side of the column web the holes are located. And a fourth option lets you decide if the holes are located off the edge of the flange or from the centerline of the beam.
Beam Safety
TYPE: DETAIL
This Custom Component will create safety cable holes in a beam's flanges.
Picking order:
1. Select the Beam
2. Pick the end point (either start or end) of beam.
Image
There is an option to choose which side of the web the holes are located and a second option that lets you decide if the holes are located off the edge of the flange or from the centerline of the beam.
Column Safety - Back to top
TYPE: DETAIL
This Custom Component will create safety cable holes in a column's web and/or flanges.
Picking order:
1. Select the Column
2. Pick the point at the top of the steel
Image
Web Holes
There is one option to choose whether or not to include holes in the web. A second option to choose which side of the column centerline the web holes are located. And a third option lets you decide if the holes are located from the centerline of the beam or off the K distance (top/edge of the T distance).
Flange Holes
There is one option to choose whether or not to include holes in flange A. A second option to choose whether or not to include holes in flange C. A third option to choose which side of the column web the holes are located. And a fourth option lets you decide if the holes are located off the edge of the flange or from the centerline of the beam.
Starting in v21.1, the above Custom Components are available in all US Environment Model Templates
- CIP-Rebar Detailing (hidden)
- Engineering (hidden)
- Precast Detailing (hidden)
- Steel Detailing*