Single Brace Plate Outside
2021
Tekla Structures
2020
Tekla Structures
Environment
Not environment-specific
Contents
Purpose and description
System Requirements
Using the Single Brace Plate Outside
Single Brace Plate Outside settings
Additional information
Purpose and description
A component to apply a Single brace connection to a tower leg and plate.System requirements
Tekla Structures.Using the Single Brace Plate Outside
To use the component:- From the component catalog select the Single_Brace_Plate_Outside component.
Image
- Select the parts in the model (3 No.), the selection order is always, the leg, the outside brace then the plate.
Image
Single Brace Plate Outside settings
Parameters TabImage
| Property | Description |
|---|---|
Image
| The Gauge Line dimensions of the profiles are read automatically from the GaugeLines.dat file (in the model, firm or system folder). These can be over written by the user if necessary. |
Image
| Option to specify a set dimension to the end of the brace, or select a factor. (user input number*hole diameter) |
| Switch BM Face | Option to switch the face from which the gauge line is shown. (dummy arrows in the model will show the face). Normally this is from the back of the L profile but in some cases it may be shown from the leg instead, the user can use this option to over ride the Tekla default. |
| Create 2nd Bolt | Option to have a single bolt connection. |
| Swicth Dummy | Option to switch the poisiton of the dummy part used to help calculate the bolt length. |
Additional information
- The Component is expecting equal L profiles, any other profile will give incorrect results.