Thomas Panels Cold Rolled Cleat (101)

Not version-specific

Tekla Structures

Environment

Not environment-specific

The Thomas Panels and Profiles Cold Rolled Cleat joint uses manufacturers trimmer cleats or mezzanine floor cleats to provide connections between various combinations of compatible ‘I’, ‘Z’ and ‘C’ sections.

Before and after

Notes

Any modification of the selected parts will cause this joint to be updated.
Primary member can be I Section, C Section / Channel, Compound C Section / Channel or Z Purlin.
Secondary members can be C Section, Compound C Section or Z Purlin.
Secondary members must be perpendicular to the primary member and have the same orientation.
If two secondaries are to be connected, both secondaries must be of the same type and section depth.
If two secondaries are to be connected, secondaries must go to the web and their centre-lines must align.
If specific values are entered under the Bolts tab, thus overriding the default bolt positions, then non standard parts may be created. The joint will determine if any of the parameters changed could cause parts to become non-standard and will automatically change part attributes accordingly.

Selection order example

Continuous member
Non-continuous member
Non-continuous member
Click middle mouse button

Thomas Panels Cold Rolled Cleat (101)

Before and after

Notes

Selection order example

See also