Tenon and Mortise (j150)
Not version-specific
Tekla Structures
Environment
Not environment-specific
Construsoft European
Image
Plug-in Tenon And Mortise (j150) creates tenon and mortise joints which can be performed on a woodworking machine such as Hundegger or machines using BTL files.
Click here to download the plug-in from Tekla Warehouse.
Back to topCreated objects
- Tenon and mortise joint
Used for
| Situation | Description |
|---|---|
Image
| Right-angle tenon and mortise joint. |
Image
| Angle tenon and mortise joint. |
Image
| Along tenon and mortise joint. |
Image
| Along tenon and mortise joint at an angle. |
Before you start
Create 2 beams in which the joint will be applied.
Back to topSelection order
- Pick main part (mortise)
- Pick secondary part (tenon)
Picture tab
The "Picture" tab shows a picture of the result of a tenon and mortise joint.
Image
| Option | Description |
|---|---|
| Tenon | Tenon joint |
| Mortise | Mortise joint |
Parameters tab
On the "Parameters" tab, define the properties of the tenon and mortise joint.
Image
| Option | Description |
|---|---|
| Tenon name | The designation for the tenon joint. This is important for machine exports. Standard: Tenon |
| Mortise name | The designation for the mortise joint. This is important for machine exports. Standard: Mortise |
| Part contact faces | Gap between parts of the joint. |
| Around tenon | The gap between the tenon and the mortise. The value specified here increases the mortise size. The tenon maintains the dimension specified at (3). |
| Tenon end face and mortise | Gap between the length of the tenon and the mortise. The value specified here makes the mortise larger. The tenon maintains the dimension specified at (5). |
| 1 | Distance that the tenon is placed from the centre of the beam. |
| 2 | Radius of tenon rounding. |
| 3 | Tenon height. |
| 4 | Tenon width. |
| 5 | Tenon length. |
| 6 | Distance from start of tenon to top of beam. |
7 | Angular rotation around the axis of the tenon. a: 15 Image
|
General tab
Click the link below to find out more:
General tab
Image
About tab
Information about the date of the tool. This date is indicative and may therefore differ even though the tool has the same content.
Image
All rights reserved. No conclusions can be associated to the representation of the pictures in relation to the operating systems under which Tekla Structures runs.
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.
Back to top