Split panel (26)

Tekla Structures
Not version-specific
Tekla Structures
Environment
Construsoft European

Image
26_001

 

You can use system component Split panel (26) to split an existing concrete panel by adding a horizontal seam. In the background, the existing panel is replaced by two new parts.

Back to top

Objects created

  • No objects are created.
Back to top

Before you start

  • Created a wall.

 

Picture tab

Image
26_002

You can use tab Picture to define the spilt level of the wall.

Option Description
1

Seam thickness.

2

Option to adjust the wall thickness.

3 Several options for defining dimensions.
4 Defining the (level) dimension.
5

The options for the level dimension are:  

Image
026_003.
  1. Seam centre.
  2. Top side lower wall.
  3. Bottom side top wall.

 

Combine tab

Image
26_003

You can use tab Combine to define the prefix for the new generated panels.

Configuration 2 tab

Image
26_004

You can use tab Configuration 2 to add an extra rotation to the new generated panel and to display information axis and geometry profiles.


All rights reserved. No conclusions can be associated to the representation of the pictures in relation to the operating systems under which Tekla Structures runs.

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.

Back to top
Was this helpful?